TWRP for minix x6, tv110, Beelink s85 and Acemax MXQ

[nukeybrown]

http://blog.geekbuying.com/index.php/2014/12/01/cx-s806-s812-tv-box-latest-firmware-and-flash-method-released-20141201/

[daemonium]

http://blog.geekbuying.com/index.php...ased-20141201/

That's a good place to start, good luck with it.

[daemonium]

Any plans to update your TWRP ports daemonium?

Sure, as soon as i have some free time.

[nukeybrown]

Thanks daemonium

[nukeybrown]

Any news on this daemonoid

[daemonium]

Updated first post with 2.8.7.0 images. minix x6 image is on its way, please kindly wait for it :P

[312BhP]

Thanks daemonium, will try and test it tomorrow.

[nukeybrown]

Any news on the cx-s806 daemonoid

[daemonium]

Any news on this daemonoid

I think you didn't understand me. I only do twrp for soc s805. I'm not working on s812 cause i don't have any tvbox with that soc. I'm sorry.

[conduisant]

Guys, is there some special trick to restoring a twrp backup? I have MXQ HD18Q, I made a full backup using the latest twrp recovery for it, so I could flash back to the stock rom if I didn't like the one I was going to flash. Now, it seems whenever i flash back the stock twrp backup the device goes into some kind of bootloop where the mxq logo flashes and disappears, the device doesn't boot up anymore. I can get into the twrp recovery no problem, however, it's not properly restoring the image. I have to flash the new firmware which works fine, but that firmware has issues with ethernet and wifi getting randomly disconnected. Please help on how I can restore my backup. I really need to flash back the stock rom.

i've exactly the same problem with my MXQ clone, after trying to retore my backup : i've got a bootloop on MXQ logo

when i put TWRP recovery.img on sdcard, the box boot well into TWRP recovery

BUT

when i try to flash another firmware with anover file recovery.img, the box don't boot into recovery (while pressing the button + POWER) and stay into the bootloop....i understand anything...

the box is bricked ? i would like to restaure my backup or flash a new firmware...someone can help me ???

[daemonium]

i've exactly the same problem with my MXQ clone, after trying to retore my backup : i've got a bootloop on MXQ logo

when i put TWRP recovery.img on sdcard, the box boot well into TWRP recovery

BUT

when i try to flash another firmware with anover file recovery.img, the box don't boot into recovery (while pressing the button + POWER) and stay into the bootloop....i understand anything...

the box is bricked ? i would like to restaure my backup or flash a new firmware...someone can help me ???

Boot to twrp, pull out the card, replace recovery.img (twrp) with original recovery.img and also copy your original firmware. Put the card back to the tvbox.
From twrp do a reboot recovery. That should work.

[conduisant]

i've just done your tips: it's working !!! many thanks...my box is flashing the firmware....thanks again !

[daemonium]

i've just done your tips: it's working !!! many thanks...my box is flashing the firmware....thanks again !

you're wellcome

[foz]

Hi daemonium
my mate has a Mxq red stripe s85 box but I wanted to back up his current setup before flashing with new rom,
I've downloaded your twrp for this s85 box but its not seeing all the partitions.
can I pm you the recovery.log to see if you may point me in the right direction ? or would you need the recovery off the box as well?
thanks for your hard work and help

[narcjoe]

Hi I just attempted to boot into TWRP recovery on my mxq m201 to restore it to an earlier time and TWRP is no longer there, it seems to have reverted to the android stock recovery. Has anyone ever experienced this before? I have the recovery image on sd card, can I just install TWRP again then flash my recovery file?

Thanks in advance