Kikat - Wasser Firmware for Beelink R89

[Gormar]

@Wasser Thanks once again!!..

I have SONY 36 Inch TV on Wasser version 2.0.2 / 2.0.3 screen resolution is too big on my TV screen. I edited build.prop from ro.sf.lcd_density=240 to 200 using Build Prop Editor, but didn't work..Am i doing anything wrong?

I'm not exactly sure if 200dpi density is "proper". I set my box to 160 dpi. You can check it beforehand setting it in "stone" (build.prop) by executing terminal command: "wm density 160". Only remeber that system bar will not be update to this density automaticaly.

[gridlock]

Wasser , dear brother , there are many sample mkv videos with DTS audio output... kindly try any with spdif passthrough in android audio settings using an optical cable. blessings bro... by the way , if it wasn't for this issue i would consider this rom the best ever... thanks for the extreme effort and patience.

[Luxilon]

Hi Wasser!

Currently enjoying your 2.0.2 FW: a HUGE upgrade from 110k. Will look to install 2.0.3 later this afternoon. My main concern is that none of the ROM's seem to be able to fix Comcast's XFINITY TV Go app "3001::Error" which appears to be different from what other Live Streaming App users are experiencing.

The XFINITY app works flawlessly for about 5-20 minutes until I get a "time-out" error which requires me to log out and log back in again (very annoying). The ESPN app works for an hour straight sometimes before it throws "unfortunately the app has stopped working..." I don't think it's a DRM issue since the rooted M8 (tomato) has no problems with this app. I've tried all the other little tricks to no avail.

Please let me know what I can do to assist you. Logs?

[wasser]

OC kernels for R89

Hi Folks,

i uploaded several update files to overlock kernels. Please take a look for the post to get more infos.

Howto install OC update file:

1. download the OC update files and copy them to external sdcard
2. reboot device into recovery mode
3. choose "apply update from external sdcard" from recovery menu
4. select the oc update file
5. reboot device after the update is done.

Have fun.

Wasser

[Gilgamesh]

can't download cpu2000ddr700gpu600, maybe it's uploading?

btw are those OC safe?

edit: something wrong with last OC link but I figured it out, but inside the file it says cpu2000-ddr600-gpu600, not ddr700?

[wasser]

can't download cpu2000ddr700gpu600, maybe it's uploading?

btw are those OC safe?

edit: something wrong with last OC link but I figured it out, but inside the file it says cpu2000-ddr600-gpu600, not ddr700?

Download url is fixed.

OC kernel is never safe! I don't recommend to oc kernel. I uploaded them because some users want to overlock the kernel. And i expect they should know that.

Wasser

[Gilgamesh]

NEW - Wasser Firmware V2.0.3 for Beelink R89/Tronsmart R28

Download url is fixed.

OC kernel is never safe! I don't recommend to oc kernel. I uploaded them because some users want to overlock the kernel. And i expect they should know that.

Wasser

thanks, of course it's a risk but sometimes there is safe OC values and not so safe values hehe

Tapatalked from my GALAXY S5

[Catadarius]

R: NEW - Wasser Firmware V2.0.3 for Beelink R89/Tronsmart R28

Hi Folks,

i uploaded several update files to overlock kernels. Please take a look for the post to get more infos.

Howto install OC update file:

1. download the OC update files and copy them to external sdcard
2. reboot device into recovery mode
3. choose "apply update from external sdcard" from recovery menu
4. select the oc update file
5. reboot device after the update is done.

Have fun.

Wasser

I'll gonna have fun for sure.

Thanks man

[d4nny82]

Installed wasser 2.0.3 on my tronsmart r28 pro

Pro
Nice boot animation

Fast menu

Smoother experience in menus navigation than stock 110k4

Youtube addon in xbmc does not cause restart

Colour and brightness look better than stock 110k4

Single partition storage

Shutdown restart menus

Con
My 4k video samples that play smooth using stock 110k4 now not smooth using mx player or spmc but my 4k h265 plays perfect in wasser 2.0.3

Mx player using the stock 110k4 usually gives better result in playing 4k than spmc or kodi but in wasser 2.0.3 they all seems to be the same.

Hopefully this will be fix in the next release

Thx wasser for the rom

[wolfheart79]

this issue should be fixed in 2.0.3, please test it and reports the results, thanks

Wasser

.


Hi Wasser . I have tested and the same situation. Hope my final firmware with be 2.0.4

Thank u

[furryhamster]

tested the new version now

- spmc with PT is now working
- my mkv with ac3 work fine with rklib acceleration
- my avi files with stereo dont work smooth with rklib but without any lib and software.

Is there a way to get the following kind of avi file working with rk lib?
General
Format : AVI
Format/Info : Audio Video Interleave
File size : 295 MiB
Duration : 45mn 47s
Overall bit rate : 900 Kbps
Writing application : transcode-1.0.6


Video
ID : 0
Format : MPEG-4 Visual
Format profile : Simple@L1
Format settings, BVOP : No
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Codec ID : DX50
Codec ID/Hint : DivX 5
Duration : 45mn 47s
Bit rate : 759 Kbps
Width : 640 pixels
Height : 360 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.132
Stream size : 249 MiB (84%)
Writing library : Lavc53.7.0


Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 45mn 47s
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 41.9 MiB (14%)
Alignment : Aligned on interleaves
Interleave, duration : 26 ms (0.65 video frame)
Interleave, preload duration : 52 ms

[Gormar]

Hi Folks,
I uploaded several update files to overlock kernels. Please take a look for the post to get more infos.

I updated my device kernel with cpu2000-ddr700-gpu600-beelink-r89.zip file and it seems that it change memory frequency to 528MHz at maximum performance which is 72MHz faster than stock and not access 600MHz.

<6>[    3.612100] ddrfreq: verion 1.2 20140526
<6>[    3.612120] ddrfreq: normal 528MHz video_1080p 528MHz video_4k 528MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 528MHz
<6>[    3.612133] ddrfreq: auto-freq=0
<6>[    3.612144] ddrfreq: auto-freq-table[0] 240MHz
<6>[    3.612155] ddrfreq: auto-freq-table[1] 324MHz
<6>[    3.612165] ddrfreq: auto-freq-table[2] 456MHz
<6>[    3.612175] ddrfreq: auto-freq-table[3] 528MHz
<6>[    3.612185] ddrfreq: auto-freq-table[4] 600MHz
<7>[    3.613598] ddrfreq: change freq to 528 MHz when normal

Other problem is that it seems that CPU doesn't go beyond 1608MHz no matter what is set in cpufreq DVFS. It is consistent with Oman findings sometime ago that RockChip blocked somewere in kernel frequency transition but kernel reports otherwise: "#define SAFETY_FREQ (1876*6)/7*MHZ".
Proof?:
Sunspider 1.0.2, CPU governor: performance, max scaling freq: 1416MHz resoult: 760-785ms.
Sunspider 1.0.2, CPU governor: performance, max scaling freq: 1608MHz resoult: 678-715ms.
Sunspider 1.0.2, CPU governor: performance, max scaling freq: 2000MHz resoult: 682-712ms.

[Luxilon]

Fixing all that little stuff is great news, but how's that Xfinity TV Go app comin' along? You get it fixed yet? Keep in mind, it's only the most widely used live streaming tv app used in North America, so not like it's a big deal or anything.

People can only handle watching so much Netflix (SD) and Movies before they get bored.

[sawbones999]

I updated my device kernel with cpu2000-ddr700-gpu600-beelink-r89.zip file and it seems that it change memory frequency to 528MHz at maximum performance which is 72MHz faster than stock and not access 600MHz.

<6>[    3.612100] ddrfreq: verion 1.2 20140526
<6>[    3.612120] ddrfreq: normal 528MHz video_1080p 528MHz video_4k 528MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 528MHz
<6>[    3.612133] ddrfreq: auto-freq=0
<6>[    3.612144] ddrfreq: auto-freq-table[0] 240MHz
<6>[    3.612155] ddrfreq: auto-freq-table[1] 324MHz
<6>[    3.612165] ddrfreq: auto-freq-table[2] 456MHz
<6>[    3.612175] ddrfreq: auto-freq-table[3] 528MHz
<6>[    3.612185] ddrfreq: auto-freq-table[4] 600MHz
<7>[    3.613598] ddrfreq: change freq to 528 MHz when normal

Other problem is that it seems that CPU doesn't go beyond 1608MHz no matter what is set in cpufreq DVFS. It is consistent with Oman findings sometime ago that RockChip blocked somewere in kernel frequency transition but kernel reports otherwise: "#define SAFETY_FREQ (1876*6)/7*MHZ".
Proof?:
Sunspider 1.0.2, CPU governor: performance, max scaling freq: 1416MHz resoult: 760-785ms.
Sunspider 1.0.2, CPU governor: performance, max scaling freq: 1608MHz resoult: 678-715ms.
Sunspider 1.0.2, CPU governor: performance, max scaling freq: 2000MHz resoult: 682-712ms.

I was about to ask if the overclock uploads were file changes or if it's a modified kernel, and this seems to indicate file changes?

The reason I was going to ask was to see if this would work with mo123's latest kernel, but from this result it seems some kernel code must be modified as well to get it working?

How about leolas' kernel have you tested this gormar?

Oh, I have another question. If 2ghz OC is working, how can we monitor the actual CPU temp? Every app I have tried for this purpose only reports 2 degrees C and highly doubt this is the CPU temp. Currently using tronsmart r28 meta with mo123 v1.2 with 1.3's kernel.

Thanks!
-SB

[Gormar]

@sawbones999. It is not possible that these update files contain whole kernel. Update overwrite resource partition with Device Tree Blob which describes all device specific variables in kernel 3.10.x.

Leolas "kernel" use exactly same metod. It just reflash resource partition. But he didn't try to OC CPU.

You can check RK3288 SoC temeprature by reading these files: /sys/devices/ff280000.tsadc/temp(0,1,2,3)_input
For example in term emulator execute this command:
cat /sys/devices/ff280000.tsadc/temp0_input