[ROM] Unofficial OpenELEC for MK808B+ and MXQ

[evolovey2k]

Head over to LibreELEC https://forum.libreelec.tv/thread-200.html

Regarding the Red light staying on , the led GPIO Pins is controlled by U-Boot in the firmware you flashed to match the board.
Some boxes only Suspend and some Power Off with Red light. I've had some of these boxes with Blue Light on even when turned off after flashing different firmware.
It's hit and miss as to led light behaviour.

Thanks a lot. I understand. I have no problems with LibreELEC powering off and powering on the box. When the box is on the LED is red and when it is turned off the LED either goes blue or stays red. Do you think you could provide some guidance on finding a factory firmware for my board S805_MXQ_V2.1_150516? Any help will be greatly appreciated. Kind regards.

[evolovey2k]

Thanks a lot. I understand. I have no problems with LibreELEC powering off and powering on the box. When the box is on the LED is red and when it is turned off the LED either goes blue or stays red. Do you think you could provide some guidance on finding a factory firmware for my board S805_MXQ_V2.1_150516? Any help will be greatly appreciated. Kind regards.

UPDATE:
I found the firmware that works perfectly with my board (S805_MXQ_V2.1_150516). Here is the link:
https://mega.nz/&usg=ALkJrhieX6R__SK...OfK77W1TtmqBwo
or: https://yadi.sk/d/cyaNjkPmkaQuo

[meiguang85]

does this one support ACEMAX K1 DVB-T2 S805 amlogic? I have tried from kszaq file, when I one addone such as zen or exodus or whatever, it will hang, does any one here have ever tried?

[twixtedchaox]

Does anyone have a copy of the releases? I tried to download today and cant seem to get anywhere with it... this is exactly what i need.. a barebones system with literally just Kodi for the GUI...

Looking for the OpenElec versions but so far only thing I think I'll be able to use is the LibrElec versions....

EDIT:

Anyone willing to help me mod this box?? I have a MXV S805P ...
Current Firmware: 20160222


"Kodi 15.2 - isengard - rc" reports the following:
AMLogic Meson8B
Revision 000a

ARMv7 Rev 1 (v71)
Current OS: Android 4.4.2 API Level 19 (kernel: Linux 3.10.33)
Screen Res: [email protected] - Full Screen
OpenGL: ARM - OpenGL ES 2.0

[clarkss12]

Does anyone have a copy of the releases? I tried to download today and cant seem to get anywhere with it... this is exactly what i need.. a barebones system with literally just Kodi for the GUI...

Looking for the OpenElec versions but so far only thing I think I'll be able to use is the LibrElec versions....

EDIT:

Anyone willing to help me mod this box?? I have a MXV S805P ...
Current Firmware: 20160222


"Kodi 15.2 - isengard - rc" reports the following:
AMLogic Meson8B
Revision 000a

ARMv7 Rev 1 (v71)
Current OS: Android 4.4.2 API Level 19 (kernel: Linux 3.10.33)
Screen Res: [email protected] - Full Screen
OpenGL: ARM - OpenGL ES 2.0

Here is the link to my OpenELEC firmware for my MK808B+, which should work for you. It is for microSD card install, just extract the 3 files and copy them to the root of your microSD card.

https://www.dropbox.com/sh/jrjtw4n1gq9k96r/AADuSd4KKHumbjtDmM9EpMMha?dl=0

[RC_cat]

Here is the link to my OpenELEC firmware for my MK808B+, which should work for you. It is for microSD card install, just extract the 3 files and copy them to the root of your microSD card.

https://www.dropbox.com/sh/mqegjnuz2...CLr6bnXva?dl=0

Hi, can u reshare the firmware please?
Thanks

[clarkss12]

Hi, can u reshare the firmware please?
Thanks

Later today when I get home.

[clarkss12]

Hi, can u reshare the firmware please?
Thanks

https://www.dropbox.com/sh/jrjtw4n1gq9k96r/AADuSd4KKHumbjtDmM9EpMMha?dl=0

[twixtedchaox]

Thankyou so much. Been playing with the firmware lately and i think i almost have it customized the way i need it!

[RC_cat]

https://www.dropbox.com/sh/jrjtw4n1g...mM9EpMMha?dl=0

Thank you !!!

[crazyazz]

Hi guys, with the stock GBOX MXQ android build SPDIF works fine. With the latest LibreELEC build I get nothing from spdif at all. Settings are all correct and the same as what I have in android kodi

[ra11]

UPDATE:
I found the firmware that works perfectly with my board (S805_MXQ_V2.1_150516). Here is the link:
https://mega.nz/&usg=ALkJrhieX6R__SK...OfK77W1TtmqBwo
or: https://yadi.sk/d/cyaNjkPmkaQuo

Hi there - can you upload this file again please? download appears to have gone. Also did you flash update with Burning tool? if yes which version pls? my device is the same but tool keeps dropping USB (suspect wrong firmware...?) thanks v much in advance!

[miaobauu]

Here is the link to my OpenELEC firmware for my MK808B+, which should work for you. It is for microSD card install, just extract the 3 files and copy them to the root of your microSD card.

https://www.dropbox.com/sh/jrjtw4n1gq9k96r/AADuSd4KKHumbjtDmM9EpMMha?dl=0

Hi, can u reshare the firmware please?
Thanks

[clarkss12]

Hi, can u reshare the firmware please?
Thanks

https://www.dropbox.com/sh/vd1l9ry8wfzdfa2/AADkT-4VQJmQQclM0q3lrkCva?dl=0

[miaobauu]

https://www.dropbox.com/sh/vd1l9ry8wfzdfa2/AADkT-4VQJmQQclM0q3lrkCva?dl=0

Many thanks!!!