If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
iMito MX1/2 - Finless ROM 1.5 - Root, debloat, init.d support
I bought new usb cable and it's working... It's very interested how sensitive it is. Thanks Bob
Yes and some devices are more sensitive to noise or resistive connections than others.
The earlier devices had more hardware around the USB ports e.g. pull up and down resistors, capacitors, etc. We are seeing some of the clones and later hardware they removed those support components probably as a cost savings as they felt it may not be needed. Unfortunately as you see, there can be issues.
Glad it worked out for you!
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
OK then if you used one of my kernels or my ROM in the readme should be an explanation of how to edit build.prop to change the DPI.
Here is what I said for 1.7
TIP FOR 1080 kernel USERS:
If you do not like the small icons on the desktop and small mouse pointer.
Use ES file explorer or another root file explorer and open build.prop
Find the line that says:
ro.sf.lcd_density=160
Edit this 160 to 240
Save and reboot. You icons should be larger like 720 now.
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
Thanks, by the way i tried yours 1.8 have trubble with WIFI and LAN, WIi wont work and LAN then it hang have to reboot as son i want to use LAN it hangs.
I edit the file but can not save or owerwrite, why?
Use ES File explorer
go into setting of ES file explorer and enable
root explorer
up to root
mount system RW
Mount system RW must be done or you wont be able to edit files in /system
Bob
"Pzebacz im, bo nie wiedzą, co czynią"
"Прости им, они не ведают, что творят"
"Perdona loro perché non sanno quello che fanno"
"Vergib ihnen, denn sie wissen nicht, was sie tun"
"Vergeef hen want ze weten niet wat ze doen"
"Pardonne-leur car ils ne savent pas ce qu'ils font"
"Perdónalos porque no saben que lo que hacen"
"Oprosti im, jer ne znaju što čine"
"Forgive them as they know not what they do"
One it Webkey app has a built in terminal. On the official rom it works but on your it complains about libncurses.so no being in /system/xbin/bash not sure what all that is about but can you look into it as bash is a file and when opened it is full of code.
Hello reddragon72,
running into precicely the same issue as you using webkey on finless 1.7c
Have you found a solution for the libncurses problem?
I just flashed my device with the 'iMito MX1 Finless 1.5 ROM Root Debloat init.d' and I'm loving it, thanks again!
However, I am now getting an issue with my USB Ethernet adapter, once the device has booted, my Ethernet connection is enabled and the MAC Address is present.. but, the lan configurations (IP Address) are not being set (0.0.0.0).
If I toggle the 'enable Ethernet' from off to on, the Ethernet configuration details are configured successfully.
Any ideas? Ideally I would prefer to have my device be accessible to the internet on boot rather than toggling the settings every time.
Hello
does anybody know where i can get the kernel source for this rom? i have Mk809II device with MT5931 Wifi, this ROM is working fine but i need to recompile the kernel with my touch screen, i used following AndrewDB kernel and manage to compile working kernel with my touch screen but there is no WIFI or Bluetooth working. if i can get kernel source which was used for this rom i can rebuild the kernel with my touch screen please?
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment