MiniMX S905 - Ubuntu 16.04 64bits (with kodi and X) on sdcard

[Reddwarf]

hmm, to bad if it not boot.
btw , when i booting my mini m8s, i saw mali drm driver is loaded, perhaps this is mali gpu driver,
what about your? perhaps you could check by type command dmesg?

i just install linux image 3.14.79-84 , but when reboot, it said cannot find root fs.... so i have dropped to shell....

then with new microsdcard, i try to play with official odroid c2 image ( ubuntu64-16.04lts-mate-odroid-c2-20160525.img ), i change BOOT partition files with s905_autoscript and dtb from ubuntu multi, and..... i can boot.... i have ubuntu mate desktop.... the the box restart....
now.... my mini m8s is bricked..... ehehehehe.....

for now.... i still download stock rom, and try this method to un brick.... http://forum.xda-developers.com/show...&postcount=361

i will play with Mini M8S tomorrow...

Sorry to hear about the bricking, I have bricked both my Mini M8S and MX-III but successfully unbricked them by flashing the NAND with the windows tool from Chinagadgets. Do you have a Windows pc?
BTW: I'm building the kernel now, will see how it turns out, the kernel you linked to me seems to have Mali-450 support

[sukanime]

Sorry to hear about the bricking, I have bricked both my Mini M8S and MX-III but successfully unbricked them by flashing the NAND with the windows tool from Chinagadgets. Do you have a Windows pc?
BTW: I'm building the kernel now, will see how it turns out, the kernel you linked to me seems to have Mali-450 support

Thanks...
I only have Linux PC.
I'am looking forward for the news about compiling the kernel and Mali support.



Btw, Look like i have done a stupid thing....
When i got "no signal" in my Samsung TV and only blue led in front plus red ligh in back, i thought my Mini M8S Android TV Box is bricked.
It turn out, My HDMI Port on My Samsung TV is somehow "broken".

Right now, i have Android running again.
But, i'am already messed up with u-boot, and My Mini M8S cannot booting from SD Card... even when i press the Reset button....
Before I "Un bricked" it, My Mini M8S will boot SD Card when i inser SD Card in the Slot....


If anyone want to Un Bricked any AMLogic TV Box, and Only Have Linux OS PC or Laptop, you can follow this instructions http://www.stane1983.com/index.php/2...rd-from-linux/
And Get the Right Firmaware/Rom for your TV Box, and you are safe....
For Mini M8S , i use get the ROM from here http://freaktab.com/forum/tv-player-...test-firmware/

I hope this will help every one....

Now, i will try Balbes150 method to boot from SD Card using update_u-boot_20160907.img.xz

[sukanime]

Thanks God....
My Mini M8S can boot from SD Card again....
Now i posting from Ubuntu Mate, with the new kernel linux-image-3.14.79-84_20160926_arm64.deb

i use the method in here http://freaktab.com/forum/tv-player-...thod-and-files
i use the Universal Version - https://yadi.sk/d/srrtn6kpnsKz2/upda...versal_version
the file i use:
- update_u-boot_20160907.img.xz
- aml_autoscript.zip v0.6 - https://yadi.sk/d/srrtn6kpnsKz2/upda..._version/v_0.6

format my sd card with fat32 using gparted, extract update_u-boot_20160907.img.xz .
then copy update_u-boot_20160907.img and aml_autoscript.zip to micro sd card.
turn on my Mini M8S, go to Apps Home Screen, then click Update&Backup.
Under the "Local Update" section, click "Select".
It will examine the SD Card and you should see the file, "aml_autoscript.zip", select it.
This will return you to the Update&Backup app's home screen.
In the "Local Update" section, click "Update", to run the update.
The update process is fast and it will reboot Mini M8S, then go to Recovery Mode.
this got me panic.... i think i failed the process...

unplug power adapter, take out microsd, then i put LibreELEC microsd,
plug the power adapter, then....
Tadaa..... i got LibreELEC Boot splash.... and then Kodi....

then shutdown LibreELEC with remote control, un plug power adapter.

now i put Ubuntu Mate microsd, then plug the power adapter....
Tada,,,, it boot without problem....
i remember, yesterday i cannot boot it, it fail to locate the ROOTFS.....

so strange.... never mind....
its time to compile the module driver for wifi card and soundcard...
after i check it with LibreELEC, my Sound card is AML M8, like in Mini MX.

[Reddwarf]

@sukanime: great to hear you'r back in business I haven't had any luck compiling the new kernel, the build process stops when compiling driver/built-in with error code 2. I have tried googeling it but found no solution, Im at loss... The new kerne seems to have mali support, unfortunately it does not help me 'cause my intention was to get accelerated video and I just read on the net that the mali is not capable of doing that. It is pretty much a showstopper for what I intended to use the Mini MX-III for. Btw that box died yesterday when I tried to boot an Ubuntu-16.LTS image and it seems that it is not unbrickable, so I switched testing to my Mini M8S. I also have a Beelink MX2 with allwinner H3 cpu and mali 400 GPU.
Since the Mini M8S was intended to run Android and be part of a navigation system in my car I will put work on 905's on hold and consenrate on the Beelink X2 box to see what I can use it for.

[sukanime]

@sukanime: great to hear you'r back in business I haven't had any luck compiling the new kernel, the build process stops when compiling driver/built-in with error code 2. I have tried googeling it but found no solution, Im at loss... The new kerne seems to have mali support, unfortunately it does not help me 'cause my intention was to get accelerated video and I just read on the net that the mali is not capable of doing that. It is pretty much a showstopper for what I intended to use the Mini MX-III for. Btw that box died yesterday when I tried to boot an Ubuntu-16.LTS image and it seems that it is not unbrickable, so I switched testing to my Mini M8S. I also have a Beelink MX2 with allwinner H3 cpu and mali 400 GPU.
Since the Mini M8S was intended to run Android and be part of a navigation system in my car I will put work on 905's on hold and consenrate on the Beelink X2 box to see what I can use it for.

I'am sory to hear that story....
Btw, Ubuntu Multi DTB and Minimx Ubuntu is based from ubuntu64-16.04lts-mate-odroid-c2-20160525.img.xz
And it you read the Release News about Odroid C2 20160525, its already have Mali Driver, here the release notes http://odroid.com/dokuwiki/doku.php?...ease_note_v1.2

i hope you will find a way to un bricked the Tv Box.

[Reddwarf]

Btw, Ubuntu Multi DTB and Minimx Ubuntu is based from ubuntu64-16.04lts-mate-odroid-c2-20160525.img.xz
And it you read the Release News about Odroid C2 20160525, its already have Mali Driver, here the release notes http://odroid.com/dokuwiki/doku.php?...ease_note_v1.2

i hope you will find a way to un bricked the Tv Box.

That is fine but is does not help... The Mali GPU does NOT have the ability to aid in HW accelerated video decoding/encoding, and that was my main goal. So I decided to split my project, one box for viewing video and get some other box to process the video, don't know what it will be yet.

[sukanime]

That is fine but is does not help... The Mali GPU does NOT have the ability to aid in HW accelerated video decoding/encoding, and that was my main goal. So I decided to split my project, one box for viewing video and get some other box to process the video, don't know what it will be yet.

Hmm, i think you should looking for AMLogic VDPAU Support, not Mali GPU Driver.
VDPAU is for Audio and Video Decoding and Encoding.
GPU is for Open GLES support.

if i read comment in http://cnx-software.com/ in posting about AM Logic, sory i forgot the link , but its about some Android TV Box with S905X or Benchmark.
AmLogic S905 is much better than S905X for Audio and Video.
in there, someone has made a project with, android tv box with SoC Amlogic for Decoding and Encoding, but i don't know if he/she do it in Android OS or GNU Linux OS.

afaik, i don't know the status of VDPAU support in AMLogic.
but in the past, i have been doing Encoding & Decoding with Intel VAAPI and Nvidia VDPAU with mplayer & mencoder in x86 platform.
from quick googling, Broadcom in Rasberry Pi have the best support.
i think you should go to Kodi Forum, LibreELEC and OpenELEC forum to find out.

ps: VDPAU actually technology from Nvidia, but some how this "VDPAU" thing is used as the decoding and encoding technology name for AMD and other too.


Edit:
I just saw this dmesg in kernel 3.14.79-84

[    3.247275] codec:[tsync_pcr_init]init success.
[    3.247315] codec:regist mpeg12 codec profile
[    3.247349] codec:regist mpeg4 codec profile
[    3.247350] codec:amvdec_vc1 module init
[    3.247381] codec:regist vc1 codec profile
[    3.247383] codec:amvdec_h264 module init
[    3.247440] codec:regist h264 codec profile
[    3.247442] codec:amvdec_h264mvc module init
[    3.247472] codec:regist hmvc codec profile
[    3.247474] codec:amvdec_h264_4k2k module init
[    3.247508] codec:regist h264_4k2k codec profile
[    3.247510] codec:amvdec_h265 module init
[    3.247540] codec:regist hevc codec profile
[    3.247572] codec:regist mjpeg codec profile
[    3.247574] codec:amvdec_real module init
[    3.247604] codec:regist real codec profile
[    3.247605] codec:amvdec_avs module init
[    3.247636] codec:regist avs codec profile
[    3.247678] amvenc_avc_probe -- reserved memory config fail.

This kernel have "VDPAU" for codec mpeg12, mpeg4, vc1, h264, hmvc, h264_4k2k, h265, hevc, mjpeg, amv, avs, and real
But i don't know how to use it, and i hope you can find it usefull.

[int0x13]

Hello, i'm using ubuntu without much issues as a server. I got a new Serial to USB adapter that is not detected by the kernel. I dont find the driver for it, for the odroid-c2. Could you try to compile it for me and give me the resulted driver to make my serial-USB adapter works? Thanks a lot.
My config:
Bus 002 Device 005: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
I found this thead that is talking about it:
http://forum.odroid.com/viewtopic.php?t=21211&p=141669

anyone?
I found good information here:

http://forum.odroid.com/viewtopic.php?f=111&t=9972

I managed to compile the source code ch34x.c that you can find into my previous link (here http://forum.odroid.com/download/file.php?id=1921)
Now i got a good .ko driver and i can insmod it very well and i can see the /dev/ttyUSB0 device. But when i try to connect with minicom, it's not working and i got this into dmesg:

[1743079.078465] WARN::hc_xfer_timeout:2690: hc_xfer_timeout: timeout on channel 10
[1743079.078474] WARN::hc_xfer_timeout:2692:    start_hcchar_val 0x03189840
[1743079.078482] WARN::hc_xfer_timeout:2697:    chn-10,ep3-IN:type:2,speed:1,len:256,addr12

Maybe some more information about this here:

http://www.cnx-software.com/2015/03/06/how-to-build-a-single-kernel-module-driver-in-ubuntu/

Any idea what's going on here?

[sukanime]

Hi balbes150 and Reddwarf,

i have solve the problem, and now i can make Realtek RTL8723BS and AML M8 Soundcard in Mini M8S to work.
Now My Mini M8S have Wifi, Bluetooth, Sound and X11 Accelerated Mali OpenGL 32mbpp 1080p60hz without color mapping error.
I can play Movie with VLC using X11 Video Output (XCB) its very smooth.
I use Firefox 32bit, and its stable.
i use Odroid Ubuntu Mate from Koxx release with custom kernel, and i change s905_autoscript from Ubuntu Multi DTB from balbes150.
I'am very happy....
I attach the screenshot when i play anime in VLC.

If anyone want the ubuntu mate image, i will make it and upload it to mediafire.



FYI, after i looking OpenELEC dmesg, lsmod, then you must recompile the whole kernel to make the Wifi and Bluetooth (i'am not test the bluetooth)
if you just compile module driver, you cannot turn on the wifi, its need sdio.


so i compile using linux amlogic source code from Koxx, its 3.14.29 , then copy amlogic wifi folder from OpenELEC kernel source to linux amlogic source code, and edit Makefile, Kconfig to just enable RTL8723BS.
and enable sdio in amlogic wifi section.

here the dmesg log:

[    6.673892] RTL871X: module init start
[    6.673896] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844
[    6.673897] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844
[    6.673899] ######platform_wifi_power_on:
[    6.673903] ------------[ cut here ]------------
[    6.673919] WARNING: CPU: 3 PID: 192 at drivers/gpio/gpiolib.c:207 gpio_ensure_requested+0x84/0x100()
[    6.673920] autorequest GPIO-234
[    6.673929] Modules linked in: 8723bs(+) cfg80211 ipv6 autofs4
[    6.673934] CPU: 3 PID: 192 Comm: systemd-modules Not tainted 3.14.29+ #28
[    6.673937] Call trace:
[    6.673945] [<ffffffc001088b64>] dump_backtrace+0x0/0x138
[    6.673948] [<ffffffc001088cbc>] show_stack+0x20/0x30
[    6.673955] [<ffffffc0017c363c>] dump_stack+0x7c/0xc0
[    6.673960] [<ffffffc0010ad2dc>] warn_slowpath_common+0x94/0xc0
[    6.673963] [<ffffffc0010ad37c>] warn_slowpath_fmt+0x74/0x88
[    6.673967] [<ffffffc001387d1c>] gpio_ensure_requested+0x80/0x100
[    6.673970] [<ffffffc00138976c>] gpiod_direction_output+0x70/0x314
[    6.673975] [<ffffffc00163eb4c>] set_wifi_power+0x28/0x38
[    6.673978] [<ffffffc00163eca8>] extern_wifi_set_enable+0x114/0x1ac
[    6.674069] [<ffffffbffc1f7820>] $x+0x28/0x54 [8723bs]
[    6.674133] [<ffffffbffc29904c>] $x+0x4c/0x104 [8723bs]
[    6.674136] [<ffffffc0010816a8>] do_one_initcall+0xd4/0x138
[    6.674142] [<ffffffc00112527c>] load_module+0x14b0/0x1e04
[    6.674144] [<ffffffc001125d48>] SyS_finit_module+0x80/0x90
[    6.674146] ---[ end trace 415d4918197c627e ]---
[    6.674171] [extern_wifi_set_enable] WIFI  Disable! 234
[    6.860922] systemd-journald[198]: Received request to flush runtime journal from PID 1
[    7.178833] [extern_wifi_set_enable] WIFI  Enable! 234
[    7.223138] hdmitx: system: [edid_tx_segaddr] err = -6
[    7.223141] hdmitx: system: [gpio_read_edid] setptr = 0
[    7.339729] BT_RADIO going: on [    7.344490] BCM_BT: going ON
[    7.360050] hdmitx: system: [edid_tx_segaddr] err = -6
[    7.366971] hdmitx: system: [gpio_read_edid] setptr = 0
[    7.530649] cfg80211: World regulatory domain updated:
[    7.537283] cfg80211:  DFS Master region: unset
[    7.539078] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.555848] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    7.563681] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    7.571708] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    7.579685] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    7.592774] 00ffffffffffff004c2dc007000000002e140103804627780aee91a3544c9926
               0f5054bdef80714f8100814081809500950fb300a940023a801871382d40582c
               4500a05a0000001e662150b051001b3040703600a05a0000001e000000fd0018
               4b1a5117000a202020202020000000fc0053414d53554e470a2020202020017c                
 [    7.594689] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    7.594692] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[    7.594694] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    7.594696] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    7.782403] sdio: new high speed SDIO card at address 0001
[    7.782592] sdio: clock 50000000, 4-bit-bus-width                
 [    7.782592] [sdio_reinit] finish
[    7.782848] RTL871X: register rtw_netdev_ops to netdev_ops
[    7.782854] RTL871X: rtw_wdev_alloc(padapter=ffffff80015ea000)
[    7.782894] RTL871X: Register RTW cfg80211 vendor cmd(0x67) interface
[    7.783358] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1
[    7.783365] RTL871X: Chip Version Info: CHIP_8723B_Normal_Chip_TSMC_F_CUT_1T1R_RomVer(0)
[    7.783451] RTL871X: EEPROM type is E-FUSE
[    7.785718] RTL871X: SetHwReg8723B: bMacPwrCtrlOn=1
[    7.786044] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
[    7.786046] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
[    7.786098] RTL871X: PowerOnCheck: 0x1B8 test Pass.
[    7.786373] RTL871X: _ReadAdapterInfo8723BS, 0x4e=0xe2
[    7.786668] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
[    7.821580] RTL871X: hal_ReadEFuse_WiFi: data end at address=0xad
[    7.821585] RTL871X: Efuse Realmap:
 [    7.821597] 29 81 03 7C 51 08 28 00 62 07 0D 45 10 02 00 00
[    7.821607] 2C 2D 2D 2C 2A 2A 2E 2F 2F 2E 2C E0 FF FF FF FF
[    7.821616] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821625] FF FF FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D
[    7.821635] 2D 2D 2D 2D 2D E0 FF FF FF FF FF FF FF FF FF FF
[    7.821644] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821654] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821663] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821673] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821682] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821692] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821701] FF FF FF FF FF FF FF FF 20 23 23 00 00 00 FF FF
[    7.821710] FF 29 20 11 00 00 00 FF 00 FF 12 FF FF FF FF FF
[    7.821720] 3E 10 01 02 23 00 00 FF 20 04 4C 02 23 B7 21 02
[    7.821729] 0C 00 22 04 00 08 00 32 FF 21 02 0C 00 22 2A 01
[    7.821738] 01 00 00 00 00 00 00 00 00 00 00 00 02 00 FF FF
[    7.821747] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.821757] 00 EB 00 6E 01 00 00 00 00 FF CC 79 CF 47 FF 8D
[    7.821766] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821776] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821785] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821794] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821804] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821813] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821823] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821832] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821842] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821851] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821860] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821870] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821879] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.821889] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[    7.822010] RTL871X: Hal_EfuseParseBTCoexistInfo_8723B: Enable BT-coex, ant_num=1
[    7.822304] RTL871X: Hal_EfuseParsePackageType_8723B phy efuse read 0x1FB =fc
[    7.822324] RTL871X: PackageType = 0x4
[    7.822327] RTL871X: Hal_EfuseParseVoltage_8723B hwinfo[EEPROM_Voltage_ADDR_8723B] =62
[    7.822329] RTL871X: Hal_EfuseParseVoltage_8723B pHalData->adjuseVoltageVal =6
[    7.822330] RTL871X: AutoloadFail =0,
[    7.822453] RTL871X: pHalData->EEPROMRFGainVal=0
[    7.822454] RTL871X: EEPRORFGainOffset = 0x29
[    7.822926] RTL871X: SetHwReg8723B: bMacPwrCtrlOn=0
[    7.823346] RTL871X: <==== _ReadAdapterInfo8723BS in 40 ms
[    7.823492] RTL871X: Hal_ChannelPlanToRegulation ChannelPlan:0x20,Regulation(2_4G/5G):0x03,0x03
[    7.823495] RTL871X: init_channel_set ChannelPlan ID 20 Chan num:13
[    7.823948] RTL871X: rtw_alloc_macid(eth%d) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
[    7.823951] RTL871X: rtw_register_early_suspend
[    7.823967] RTL871X: Init_ODM_ComInfo_8723b(): fab_ver=0 cut_ver=0
[    7.823973] RTL871X: rtw_macaddr_cfg mac addr:cc:79:cf:47:ff:8d
[    7.824050] RTL871X: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[    7.824066] RTL871X: rtw_ndev_init(wlan0)
[    7.824789] RTL871X: _rtw_drv_register_netdev, MAC Address (if1) = cc:79:cf:47:ff:8d
[    7.824957] RTL871X: module init ret=0

Linux lsmod and uname:

odroid@odroid64:~$ lsmod
Module                  Size  Used by
joydev                 10320  0
fuse                   77553  3
i2c_gpio                3595  0
i2c_algo_bit            5458  1 i2c_gpio
8723bs               1676771  0
cfg80211              397824  1 8723bs
ipv6                  335455  44
autofs4                24901  2
odroid@odroid64:~$ uname -a
Linux odroid64 3.14.29+ #28 SMP PREEMPT Fri Oct 7 07:53:05 WIB 2016 aarch64 aarch64 aarch64 GNU/Linux
odroid@odroid64:~$

Thanks to everyone in this forum who help me...

[Reddwarf]

Hi balbes150 and Reddwarf,

i have solve the problem, and now i can make Realtek RTL8723BS and AML M8 Soundcard in Mini M8S to work.
Now My Mini M8S have Wifi, Bluetooth, Sound and X11 Accelerated Mali OpenGL 32mbpp 1080p60hz without color mapping error.
I can play Movie with VLC using X11 Video Output (XCB) its very smooth.
I use Firefox 32bit, and its stable.
i use Odroid Ubuntu Mate from Koxx release with custom kernel, and i change s905_autoscript from Ubuntu Multi DTB from balbes150.
I'am very happy....
I attach the screenshot when i play anime in VLC.

If anyone want the ubuntu mate image, i will make it and upload it to mediafire.



FYI, after i looking OpenELEC dmesg, lsmod, then you must recompile the whole kernel to make the Wifi and Bluetooth (i'am not test the bluetooth)
if you just compile module driver, you cannot turn on the wifi, its need sdio.


so i compile using linux amlogic source code from Koxx, its 3.14.29 , then copy amlogic wifi folder from OpenELEC kernel source to linux amlogic source code, and edit Makefile, Kconfig to just enable RTL8723BS.
and enable sdio in amlogic wifi section.

here the dmesg log:

[ 6.673892] RTL871X: module init start
[ 6.673896] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844
[ 6.673897] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844
[ 6.673899] ######platform_wifi_power_on:
[ 6.673903] ------------[ cut here ]------------
[ 6.673919] WARNING: CPU: 3 PID: 192 at drivers/gpio/gpiolib.c:207 gpio_ensure_requested+0x84/0x100()
[ 6.673920] autorequest GPIO-234
[ 6.673929] Modules linked in: 8723bs(+) cfg80211 ipv6 autofs4
[ 6.673934] CPU: 3 PID: 192 Comm: systemd-modules Not tainted 3.14.29+ #28
[ 6.673937] Call trace:
[ 6.673945] [<ffffffc001088b64>] dump_backtrace+0x0/0x138
[ 6.673948] [<ffffffc001088cbc>] show_stack+0x20/0x30
[ 6.673955] [<ffffffc0017c363c>] dump_stack+0x7c/0xc0
[ 6.673960] [<ffffffc0010ad2dc>] warn_slowpath_common+0x94/0xc0
[ 6.673963] [<ffffffc0010ad37c>] warn_slowpath_fmt+0x74/0x88
[ 6.673967] [<ffffffc001387d1c>] gpio_ensure_requested+0x80/0x100
[ 6.673970] [<ffffffc00138976c>] gpiod_direction_output+0x70/0x314
[ 6.673975] [<ffffffc00163eb4c>] set_wifi_power+0x28/0x38
[ 6.673978] [<ffffffc00163eca8>] extern_wifi_set_enable+0x114/0x1ac
[ 6.674069] [<ffffffbffc1f7820>] $x+0x28/0x54 [8723bs]
[ 6.674133] [<ffffffbffc29904c>] $x+0x4c/0x104 [8723bs]
[ 6.674136] [<ffffffc0010816a8>] do_one_initcall+0xd4/0x138
[ 6.674142] [<ffffffc00112527c>] load_module+0x14b0/0x1e04
[ 6.674144] [<ffffffc001125d48>] SyS_finit_module+0x80/0x90
[ 6.674146] ---[ end trace 415d4918197c627e ]---
[ 6.674171] [extern_wifi_set_enable] WIFI Disable! 234
[ 6.860922] systemd-journald[198]: Received request to flush runtime journal from PID 1
[ 7.178833] [extern_wifi_set_enable] WIFI Enable! 234
[ 7.223138] hdmitx: system: [edid_tx_segaddr] err = -6
[ 7.223141] hdmitx: system: [gpio_read_edid] setptr = 0
[ 7.339729] BT_RADIO going: on [ 7.344490] BCM_BT: going ON
[ 7.360050] hdmitx: system: [edid_tx_segaddr] err = -6
[ 7.366971] hdmitx: system: [gpio_read_edid] setptr = 0
[ 7.530649] cfg80211: World regulatory domain updated:
[ 7.537283] cfg80211: DFS Master region: unset
[ 7.539078] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.555848] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7.563681] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7.571708] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 7.579685] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 7.592774] 00ffffffffffff004c2dc007000000002e140103804627780aee91a3544c9926
0f5054bdef80714f8100814081809500950fb300a940023a801871382d40582c
4500a05a0000001e662150b051001b3040703600a05a0000001e000000fd0018
4b1a5117000a202020202020000000fc0053414d53554e470a2020202020017c
[ 7.594689] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 7.594692] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[ 7.594694] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 7.594696] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 7.782403] sdio: new high speed SDIO card at address 0001
[ 7.782592] sdio: clock 50000000, 4-bit-bus-width
[ 7.782592] [sdio_reinit] finish
[ 7.782848] RTL871X: register rtw_netdev_ops to netdev_ops
[ 7.782854] RTL871X: rtw_wdev_alloc(padapter=ffffff80015ea000)
[ 7.782894] RTL871X: Register RTW cfg80211 vendor cmd(0x67) interface
[ 7.783358] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1
[ 7.783365] RTL871X: Chip Version Info: CHIP_8723B_Normal_Chip_TSMC_F_CUT_1T1R_RomVer(0)
[ 7.783451] RTL871X: EEPROM type is E-FUSE
[ 7.785718] RTL871X: SetHwReg8723B: bMacPwrCtrlOn=1
[ 7.786044] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
[ 7.786046] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
[ 7.786098] RTL871X: PowerOnCheck: 0x1B8 test Pass.
[ 7.786373] RTL871X: _ReadAdapterInfo8723BS, 0x4e=0xe2
[ 7.786668] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
[ 7.821580] RTL871X: hal_ReadEFuse_WiFi: data end at address=0xad
[ 7.821585] RTL871X: Efuse Realmap:
[ 7.821597] 29 81 03 7C 51 08 28 00 62 07 0D 45 10 02 00 00
[ 7.821607] 2C 2D 2D 2C 2A 2A 2E 2F 2F 2E 2C E0 FF FF FF FF
[ 7.821616] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821625] FF FF FF FF FF FF FF FF FF FF 2D 2D 2D 2D 2D 2D
[ 7.821635] 2D 2D 2D 2D 2D E0 FF FF FF FF FF FF FF FF FF FF
[ 7.821644] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821654] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821663] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821673] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821682] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821692] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821701] FF FF FF FF FF FF FF FF 20 23 23 00 00 00 FF FF
[ 7.821710] FF 29 20 11 00 00 00 FF 00 FF 12 FF FF FF FF FF
[ 7.821720] 3E 10 01 02 23 00 00 FF 20 04 4C 02 23 B7 21 02
[ 7.821729] 0C 00 22 04 00 08 00 32 FF 21 02 0C 00 22 2A 01
[ 7.821738] 01 00 00 00 00 00 00 00 00 00 00 00 02 00 FF FF
[ 7.821747] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7.821757] 00 EB 00 6E 01 00 00 00 00 FF CC 79 CF 47 FF 8D
[ 7.821766] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821776] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821785] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821794] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821804] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821813] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821823] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821832] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821842] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821851] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821860] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821870] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821879] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.821889] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 7.822010] RTL871X: Hal_EfuseParseBTCoexistInfo_8723B: Enable BT-coex, ant_num=1
[ 7.822304] RTL871X: Hal_EfuseParsePackageType_8723B phy efuse read 0x1FB =fc
[ 7.822324] RTL871X: PackageType = 0x4
[ 7.822327] RTL871X: Hal_EfuseParseVoltage_8723B hwinfo[EEPROM_Voltage_ADDR_8723B] =62
[ 7.822329] RTL871X: Hal_EfuseParseVoltage_8723B pHalData->adjuseVoltageVal =6
[ 7.822330] RTL871X: AutoloadFail =0,
[ 7.822453] RTL871X: pHalData->EEPROMRFGainVal=0
[ 7.822454] RTL871X: EEPRORFGainOffset = 0x29
[ 7.822926] RTL871X: SetHwReg8723B: bMacPwrCtrlOn=0
[ 7.823346] RTL871X: <==== _ReadAdapterInfo8723BS in 40 ms
[ 7.823492] RTL871X: Hal_ChannelPlanToRegulation ChannelPlan:0x20,Regulation(2_4G/5G):0x03,0x03
[ 7.823495] RTL871X: init_channel_set ChannelPlan ID 20 Chan num:13
[ 7.823948] RTL871X: rtw_alloc_macid(eth%d) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
[ 7.823951] RTL871X: rtw_register_early_suspend
[ 7.823967] RTL871X: Init_ODM_ComInfo_8723b(): fab_ver=0 cut_ver=0
[ 7.823973] RTL871X: rtw_macaddr_cfg mac addr:cc:79:cf:47:ff:8d
[ 7.824050] RTL871X: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[ 7.824066] RTL871X: rtw_ndev_init(wlan0)
[ 7.824789] RTL871X: _rtw_drv_register_netdev, MAC Address (if1) = cc:79:cf:47:ff:8d
[ 7.824957] RTL871X: module init ret=0

Linux lsmod and uname:

odroid@odroid64:~$ lsmod
Module Size Used by
joydev 10320 0
fuse 77553 3
i2c_gpio 3595 0
i2c_algo_bit 5458 1 i2c_gpio
8723bs 1676771 0
cfg80211 397824 1 8723bs
ipv6 335455 44
autofs4 24901 2
odroid@odroid64:~$ uname -a
Linux odroid64 3.14.29+ #28 SMP PREEMPT Fri Oct 7 07:53:05 WIB 2016 aarch64 aarch64 aarch64 GNU/Linux
odroid@odroid64:~$

Thanks to everyone in this forum who help me...

I would very much like to try your image, can you upload it somewhere I can download it? Thanks a lot in advance

[sukanime]

I would very much like to try your image, can you upload it somewhere I can download it? Thanks a lot in advance

ok, but i cannot do it fast.
i will clean it, there a lot of thing that make the size big, the root fs take 18GB disk space.
when i try to make the wifi work, i try to compile alot of kernel source, and never "make clean", i just leave it as it, so its take a lot of space.

when its ready, i will post in here.

[Reddwarf]

ok, but i cannot do it fast.
i will clean it, there a lot of thing that make the size big, the root fs take 18GB disk space.
when i try to make the wifi work, i try to compile alot of kernel source, and never "make clean", i just leave it as it, so its take a lot of space.

when its ready, i will post in here.

Great No worries about size for my part, I have 32 and 64 Gb sdcards.

[sukanime]

Great No worries about size for my part, I have 32 and 64 Gb sdcards.

thats nice, mine is 32GB Sdcards,
but, because i want reduce the size, for some one else that want to try it.
i already reduce it to aroud 7GB, and i will try to test the image to 8GB Sd card, if it looking good, i will upload it.
i hope i can upload it tommorow.

[Nofan Tasi]

Not sure if it matters but i seems a new odroid c2 ubuntu 16.04 version (v2.1) came out recently

http://odroid.com/dokuwiki/doku.php?id=en:c2_ubuntu_release_note_v2.1

ubuntu64-16.04lts-mate-odroid-c2-20161003.img.xz
thanks

[sukanime]

Not sure if it matters but i seems a new odroid c2 ubuntu 16.04 version (v2.1) came out recently
http://odroid.com/dokuwiki/doku.php?...ease_note_v2.1
ubuntu64-16.04lts-mate-odroid-c2-20161003.img.xz
thanks

Thanks for the info,
right now i in the middle download it, i hope tommorow it will finished.
and i will play with it, if it good, i will use it.


Reddwarf
I have finished making the image.
Right now, i need a fast internet conection, i only have mobile phone intetnet connection with speed around 20-30KBps.
So i will try to ask my friend, to help me upload the file, its 3,4GB compressed with Xz.
I will post in here if it ready for download.
i'am sory if it take a long time.