superceleron Would it be possible to use the kernel from the H96 Pro+ on this ROM?
-
-
How to prevent the Ax12 series from being caught and frozen. Is the performance down and the 3d problem hardware? Will it fix with software? Please help me.Comment
-
-
Originally posted by BrandoR View Post
Yes!!
Only turns on when i plug electricity, and since used only 5V is quiete silent fan noise...
I use a little Bondic glue on the corners of the dissipator, so i should remove it on future easily...
Hope i did help someone to cool down it.
Let me confirm if it is 30 or 40º.......lololComment
-
Could you please make the file available for download? I'd like to test a kernel with all cores at 1.5 ghz and OC gpu on this ROM!Originally posted by superceleron View PostComment
-
That is not in the kernel m8, is a big mod on the device tree, and every device have its how device tree!Originally posted by BrandoR View PostComment
-
you have tested ? you have link and how i can install kernel h96 pro + on this rom ,is the best rom so far for h96 pro+Originally posted by BrandoR View PostComment
-
First I want to thank superceleron for creating this ROM, This ROM worked like a charm on my Beelink GT1 Ultimate with SN: AX12........
Looks like there are a lot of confusion on how to flash this ROM on to the G1 Ultimate so I will tell what worked for me.
1. First I downloaded the SCV1-GT1_Ultimate.zip and unpacked this zip file to a folder so I got the SCV1-GT1_Ultimate.img file in this folder.
2 I flashed this with usb burning tool v2.0.8, Connect the G1 Ultimate with usb cable male to male cable.
3. Hold the reset button pressed in and connect the USB cable to the port next to the microSD card slot. and hold the reset button for 10-20 sec
and then the usb burning tool should have a connection to the G1 Ultimate.
4. Open up the SCV1-GT1_Ultimate.img with usb burning tool and flash, I had Erase flash set to Normal erase and Erase bootloader also check.
this took about 3 minutes to flash onto the G1 Ultimate.
The G1 Ultimate had the default stock firmware GT1_704N0_LTM8830.img on it before I flashed and this worked without any problems.
I can also comfirm that it is safe to flash with Erase bootloader checked when using usb burning tool.
This ROM work a lot better than GT1_704N0 firmware with the default ROM the G1 Ultimate with SN: AX12..... have a lot of issues obviously. The video playback
in kodi on default stock is terrible. stuttring and a lot of blocking artifacts and so on. But the SCV1 plays the same movies without any problems with FTMC.
One thing that is different from stock ROM and Kodi 17.4 is that there is a amcodec in FTMC witch is not there in Kodi 17.4 on stock firmware. Maybe the problem
with SN: AX12.... is a codec problem of some sort.
A few questions to superceleron, I wanted to set the G1 to 1080p 50Hz where did that option go? and dose the Android TV SCV1 have the same kind of hardware
support and amcodec?
-GMLast edited by ghostmanno; 15 October 2017, 16:08.Comment
-
-
I ran AnTuTu the score was 39997, about 8600 for the 3d part of the score.Originally posted by bakara View PostComment
-
Super thanks
Sent from my Redmi Note 4 using Tapatalk
Comment
-
I received yesterday the same box, Beelink GT1 Ultimate with SN: AX12........ from GB and i ran AnTuTu with score: 40321 ( 3D: 9311 - UX: 14457 - CPU: 12259 - RAM: 4294 )Originally posted by ghostmanno View Post
It seems the score is ok but in the 3D test the frames were 2.97 and 5.65 with a lot of lagging also in sound.
I will download a game tonight to test it.
I want to try this rom but im inexperienced with all of that flashing etc and im afraid i will brick it.
Comment
-
^^
with which rom you got a box?Comment
-
704N0Originally posted by bakara
Στάλθηκε από το LG-H815 μου χρησιμοποιώντας Tapatalk
Comment
-
i tried to install this rom with usb flash tool 2.9 but it give a fail message in 7% and stop .
tried a lot to stop and start again but hopeless .
Beelink GT1 Ultimate with SN: AX12.....Comment
Comment