[ROM] Beelink GT1 Ultimate SCV2-ATV (Android TV) (DDR4)

[fred.lacrima]

Hi,

Ducati_996sps and @scooter2014

Test :
start ... then plug USB with reset hold
... new error : 0x30201004UBOOT/Disk Initialize/Send Command/ Error Result

same is as suggested I
I have try to unplug then replug (reset hold)
... same error

BUT this change compare to previous error ?? so I think on another step ...

Fred.
NB as previous nothing updated, GT1 restart with stock firmware as usual ... not bricked ... just as nothing done
[EDIT] also do a test after a factory reset ... same error
... test changing USB cable ... same error
... test changing USB PC entry ... same error
... test using an USB2 HUB (but with more power) ... same error

[Kourosh]

superceleron it doesnt work When i press the ps button. How can i add the driver?
thx

[Ducati_996sps]

Hi,

Ducati_996sps and @scooter2014

Test :
start ... then plug USB with reset hold
... new error : 0x30201004UBOOT/Disk Initialize/Send Command/ Error Result

same is as suggested I
I have try to unplug then replug (reset hold)
... same error

BUT this change compare to previous error ?? so I think on another step ...

Fred.
NB as previous nothing updated, GT1 restart with stock firmware as usual ... not bricked ... just as nothing done
[EDIT] also do a test after a factory reset ... same error
... test changing USB cable ... same error
... test changing USB PC entry ... same error
... test using an USB2 HUB (but with more power) ... same error

hi when you unplus usb dont touch the start stop on usb tool or try using the sd tool

[scooter2014]

I see you say G1 not G1 ultra. Make sure you have correct rom for correct device.

[fred.lacrima]

Hi,

I see you say G1 not G1 ultra. Make sure you have correct rom for correct device.

It's a GT1 Ultimate 3GB DDR4/32G ... provide with Android 7.1.2 natively

Philippe.

[fred.lacrima]

Hi,

hi when you unplus usb dont touch the start stop on usb tool or try using the sd tool

Just redo a test ... no more success (without touching start/stop button)

I have redo a test with sd tools (burn card maker) (with a different SD_Card) ... no more success
I just see on screen : Logo, then a droid with Upgrading under and a long line of small vertical line (like switch)
after few seconds ... screen is cleared again same image ... the 8 first "switch" of the long line are like pushed ... other as before and NO MORE

I am a little frustrated ... because lot of features SVC2 ATV are really interesting for my own usage ... But I understand also that you don't have lot of time to spend on this kind of error.

I will move during the week coming ... so reduce possibility to run more test, but I will try later with another PC, even ... I don't think it's linked to the Windows PC ... but to be sure ...

Thanks a lot to all of you to try helping me ... appreciate your effort
... but don't hesitate to propose others try if you have new idea ... I will be ready to test more and more ...

Fred.

[demonpt]

fred.lacrima use burning tools 2.0.8 ! i tested and its ok . put scv1 then on twrp push it to scv2 depending on the wifi chip u have i think u have the 6255 allmoust for sure

[demonpt]

sd card maker wont work there ! i tested and the update sd or pen drive must be on fat32 good luck

[fred.lacrima]

Hi;

fred.lacrima use burning tools 2.0.8 ! i tested and its ok . put scv1 then on twrp push it to scv2 depending on the wifi chip u have i think u have the 6255 allmoust for sure

I will test with 2.0.8. in some time (I am in travel and Internet is out (I write from my zenfone3))
and yes the Wifi is 6255 ...

Fred.

[licquyd]

NVM, got it working

[lerch82]

Good day,
I have a GT1 ultimate serial AX12 with SCV1 flashed via burning tools + SCV2 updating via sd and everything works fine, but randomly the system doesn't start and the box remains blocked on black android robot.
Someone have the same issue?

At the moment noted this problem three times and now I hv decided to keep the box always in standby to avoid this trouble during system starting

First time the system was really UNBOOTABLE and on recovery I noted that internal partition was not mounted, so I FLASHED THE ROM AGAIN (SCV1 + ota v2)

Second and Third times the system fortunately loaded fine with only a restart

[leotzian]

Hi superceleron I received today ( after waiting for 3 months!!! ) my GT1 Ultimate AX version tv box, I followed your instructions Installed SCV1 using USB burning tool ( I CONFIRM THAT ERASE BOOTLOADER MUST BE TICKED ) and after using TWRP the SCV2 version.
I also confirm that AX version od Beelink GT1 Ultimate TV box has AP6255 WiFi chip ( flashed SCV2-ATV-GT1_Ultimate-OTA-AP6255.zip file ) wifi is working fine.
I also want to tell you that I don't use WiFi but a lan cable connected in my Gigabit switch, I don't know if this has to do something with the Playstore problem I have.
I want to ask in play store if I try to update or install an app I have "install pending" I rebooted but I have the same problem
Another very strange problem is that there is not the overflow button ( 3 vertical dots ) on top right corner, and in titanium I don't see the green check mark in top right to run the task I want , the same happens and in app settings xposed module I don't see the save button in the top right
Resolution is fine 1920X1080 ( I had checked to lower the zoom level but the same is happening )
Is all those happining due to android tv version? If I install android Normal version i the problem will be solved
I don't know if I had explained well but some apps don't have in the top bar some tools like save etc are missing

Sorry if something had answered earlier I tried to read all the thread.
Thanks in advance

Edit
I had installed Normal Android Version all problems are solved thanks superceleron for this rom

[Ducati_996sps]

Hi superceleron I received today ( after waiting for 3 months!!! ) my GT1 Ultimate AX version tv box, I followed your instructions Installed SCV1 using USB burning tool ( I CONFIRM THAT ERASE BOOTLOADER MUST BE TICKED ) and after using TWRP the SCV2 version.
I also confirm that AX version od Beelink GT1 Ultimate TV box has AP6255 WiFi chip ( flashed SCV2-ATV-GT1_Ultimate-OTA-AP6255.zip file ) wifi is working fine.
I also want to tell you that I don't use WiFi but a lan cable connected in my Gigabit switch, I don't know if this has to do something with the Playstore problem I have.
I want to ask 2 things in file server I cannot alter any setting I want to check to see the root share, must I edit some file? and the most important in play store if I try to update or install an app I have "install pending" I rebooted but I have the same problem
Another very strange problem is that there is not the overflow button ( 3 vertical dots ) on top right corner, and in titanium I don't see the green check mark in top right to run the task I want , the same happens and in app settings xposed module I don't see the save button in the top right
Resolution is fine 1920X1080 ( I had checked to lower the zoom level but the same is happening )
Is all those happining due to android tv version? If I install android Normal version i the problem will be solved
I don't know if I had explained well but some apps don't have in the top bar some tools like save etc are missing

Sorry if something had answered earlier I tried to read all the thread.
Thanks in advance

I ad the same problem with the playstore pending to fix it i restore my gt1 and did the setup wizard, factoy wipe then update to scv2 and again factory wipe and setup wizard its imported to do the wizard and factory wipe. Sorry for my english

[forzic]

Good morning there will be the v3 version in the future?

[fred.lacrima]

Hi,

I have redo a test with a new USB male / male cable with USB burning tool 2.08
... no more success ... always same error
2017-11-06 16:20:27 258 [0x302001004]UBOOT/Disk initialize/Send command/Error result ... at 7%
I have done multiple try to restart etc. ... but no success ??

Only the OTA seems to run as well ... from 703N to 705N or using the "Android TV mode" : http://freaktab.com/forum/tv-player-...ultimate/page2

I am really without new idea ...
... device is recognize bu burning tool ... so
... img is correct (re-download it even a zip have internal checksum ... so)
... SDCard test don't work (stop on update screen without doing anything (I presume, because, after i can restart the box without problem ... )

I have tested with different USB cable (last just buy today), tested with 2.0.8, 2.0.9 ... so really out ...

Fred.