Announcement

**Pandaii** · 25 March 2021, 22:10

Hi, I need help finding the NAND of my Csa96 rk3399

**Pandaii** · 25 March 2021, 22:50

Hi, I need help finding the NAND of my Csa96 rk3399

**Guest** · 25 March 2021, 23:01

in circle pic is small but that should be it

**Pandaii** · 28 March 2021, 23:02

Anybody know about nand chip mask rom of my box?

**N3bi2** · 30 March 2021, 11:12

Hi Anybody know witch pins short about nand chip mask in my case?

samsung KLMAG2GEAC - B002

**Guest** · 01 April 2021, 16:57

Method #1 (bricked)

Start usb tool with rom loaded, plug in USB

touch between pin 5 and 6 on this side as shown in arrow.

Method #2 (if hard bricked)

Start usb tool with rom loaded, short 5 and 6 with needle and keep in on pins, while plugging in the USB
it will start to flash.

Cheers

**Yousef515** · 09 April 2021, 21:18

Please

**Guest** · 09 April 2021, 22:52

Need better pics closeup. And chances are that chipset is really old... it might not be worth doing anything with it. It depends... the board is dated 2014 .... s8xx s9xx series.... super slow.

get me somemore info.... cheers

**Yousef515** · 09 April 2021, 23:10

Originally posted by Kyle222 View Post

Need better pics closeup. And chances are that chipset is really old... it might not be worth doing anything with it. It depends... the board is dated 2014 .... s8xx s9xx series.... super slow.

get me somemore info.... cheers

https://m.pt.aliexpress.com/item/32475207234.html?trace=wwwdetail2mobilesitedetail

**Guest** · 09 April 2021, 23:12

don't even bother with that box... you can buy one cheap online for $20 or less with s905x or better processor 1g/8g

the processor on that board is worthless AML8726

**soldiaz** · 10 April 2021, 08:37

Yes very old but has tuner built in...

**Guest** · 10 April 2021, 16:56

Good point, it does have a tuner so you are limited to which ROM you can run on it. I believe the original ROM was 4.2.2 on that box. As you need all the firmware modules for channel selection and scanning.

And it's only a dual core 1.2 thru 1.5g

Cheers

**djf1ame** · 17 April 2021, 09:23

Hi need help shorting this.

X96Q 4+64 H313
Using KLM8G1WEMB-B031 eMMC.

Tried my best on trying to find it. Even scratched off some off the board to try short.

http://www.datasheetcafe.com/klm8g1wemb-b031-datasheet-emmc-nand-flash-memory/

**rasplinjac** · 21 April 2021, 20:22

I managed to unbrick T95Z Plus DDR4 2/16.
The box did not connect to USB.
I'm not sure which pin I shortened but its from opposite side of arrow (look at pic)
Also I leave box connected to power.
Chip is Sandisk SDIN9DS2-16G.

Attached Files