NAND Chip Mask ROM Mode Short Location

[theFalcon46]

Clone TX3 Mini with S905X (2GB + 16GB)

Image Link : https://imgbb.com/gvNGF0N

Triedto upload the image directly but it kept giving me an error.

[zakariach]

Maskroom in magicsee N6 max RK3399


Hi,
My magicsee N6 max RK3399 not working anymore I tried to upgrade it via cable;and sdcard, but the device didn't recognize it,
can you help me please to use MaskRom mode to repair the system.
Ineed to short the pinout to enter maskrom mode.

Link : image 1
LINK: image 2

[klamath]

Hi,
I bricked my TQ95 2nd revision after flashing a wrong .img file, could you please point me to the pins to short (Previous T95Q answers aren't good for my version) ?

Images at the following link as i have issues uploading here : https://imgur.com/a/wpTzcph

Reply to myself, it seems that for the T95q second revision (android 9.0 stock and chip wifi realtek 8822) the pin for mask mode reset are the two big orange dots, that you need to bridge with a large screwdriver or an aluminium foil

Then i flashed this rom :
2.+[v8]+Aidan's+ROM+[s905x2]+(T95Q)+8822+TGRAM-@Apu

Everything is working now

[kozikowski11]

Hello

I have Topsion TP01 on RK3318. Anyone know to where is the pins on this tv box?

I tried to upload photos to freaktab but without any success

So, photos: https://imgur.com/a/cjDf03o
(last photo is a bottom pcb)

And one more: https://imgur.com/a/6Cfocp9
(photo is a top pcb)

[leonardocruzrj]

Hello friends,
I need help with my Tanix TX3, anyone know to where is the pins on this tv box?

[Hotrod1]

Check this post it may work for you.
http://https://forum.freaktab.com/forum/main-category/main-forum/637675-nand-chip-mask-rom-mode-short-location?p=817582#post817582

[Bosko1122]

Hello everyone.

Need some help. Does anyone knows where are located pins for nand short cut on Amlogic S905X2 TV box manufactured by SDMC, code name SDOTT0202 / DV8519, Quad-core 1.8 GHz (ARM Cortex-A53), ARM Mali-G31 MP2, RAM 2GB, ROM 4GB, NAND Samsung SEC 922 B041.

Photos in attachment

https://ibb.co/89YjX9y

https://ibb.co/LQ8rpMN

https://ibb.co/TPVZH3q

edit:
never mind. I found them. they are on the other side of board.

[Hieutthh]

Hi there, my Tanix Tx5 Pro New (S905x2) has bricked and i don'r know which pin whould i stick to enter mask rom mode!
Can anyone help me?
Here is my board pic:

https://ibb.co/YfPzg9g

https://ibb.co/0F1TKDh

https://ibb.co/Zz7GZTN

[Hotrod1]

Hi there, my Tanix Tx5 Pro New (S905x2) has bricked and i don'r know which pin whould i stick to enter mask rom mode!
Can anyone help me?
Here is my board pic:

https://ibb.co/YfPzg9g

https://ibb.co/0F1TKDh

https://ibb.co/Zz7GZTN

Use the two pins in the tiny red square in the upper left hand of this pic.

https://postimg.cc/DJbjPhwD

[dggarcia]

hello guys, anyone can hel me with my

BEELINK GT1 ULTIMATE S/N AX12

Led is on, not detected on bunring tools, no video signal

I can not upload a image because site returns error to uploading image

Thanks and sorry about my english

[Hotrod1]

I believe this post will help. The pic on the right has the Mask ROM pins in a tiny red box. The caption says did not help but that is because he had a different issue.

https://forum.freaktab.com/forum/main-category/main-forum/637675-nand-chip-mask-rom-mode-short-location?p=727928#post727928

[Underd0og]

I have a x92 box 3gb/32gb but i encounter errors when flashing on Amlogic burning Tool, is the pin's 17 and 18 to make short.

my emmc and my screen on Amlogic burning Tool

https://imageshack.com/i/pmdNTlmSp

[Underd0og]

And my nand.

https://imageshack.com/i/poRt1svEp

[Underd0og]

is the forum buggy that it does not accept uploading the images? I put two pictures and it gets all buggy.

[sami002]

Hi any one know where is the rom short pins of this ssd sm2258xt thanks

the picture on the attachement

https://ibb.co/DbdDW8t
https://ibb.co/dpPcpv3