J22 TVSTICK with AP6210 wifi

[Demontager]

sitdikov.live,
Try this ROM https://www.dropbox.com/s/0ws8l7x131...3_20130809.zip worked for me very well no flickering.
p.s. Suitable for J22. Подходит для J22

[sitdikov.live]

Demontager
flashed, he did not even turn on, the screen is black and all. Nothing happens.

[Demontager]

Probably you got deferent chip, is it same you have - http://www.aliexpress.com/item/CX-91...307080477.html ?

[sitdikov.live]

I bought it here

http://www.aliexpress.com/item/Free-Shipping-CX-919-II-Quad-Core-Android-Mini-PC-RK3188-2GB-RAM-8GB-ROM-Built/1434253903.html

I do not quite understand you
you want to say I have another device is not J22??

[sitdikov.live]

of all drivers that I have tried, I only fit this. #230

[Demontager]

i meant nevertheless of same name chips could be deferent, China made what can i say more
Ok, have a try other ROMs from http://www.freaktab.com/showthread.p...II-with-AP6210
Neomod stated these are compatible with J22.
If not work try to flash only this kernel http://www.freaktab.com/showthread.p...l=1#post101410 (flashed this to get wifi working)

[eddiek.]

To all J22 . found a way to run neomode 1.3

hey guys im trying in the pass few days to install a custum rom with no luck.
today i figuerd it out.
the problem was that when ever im trying to flash a neomode rom the screen loose signal and flickes alot.
any way i found the right setup of Kernels and rom to run the J22 AP6120 smoothly.

http://www.aliexpress.com/item/i8-keyboard-2013-2GB-Dual-attenna-strong-Wifi-Mini-PC-Quad-Core-RK3188-Android-4-2/1047980386.html

im uploading a link to a package that i made for u using neomode 1.3 (respect!).
all u need to do is run flash tool 1.37 and load each line apart.

wifi&BT works perfect.
its a 720P only.

this is the download link:

http://www.sendspace.com/file/uex7bz

[ginozzo]

minix A2 air mouse

Hi all guys,
I have just bought the Minix A2 air mouse and i would like to know if there is any kind of driver that let me to use this remote control fully with my J22 stick.
At the moment half of the buttons (home, back, menu and gyroscope) did not work.
I know that I should use a minix X7 buti wont change my J22 just to use the remote control.

Thanks in advance

[neomode]

AW: J22 TVSTICK with AP6210 wifi

All you need is the right key mapping for the device.

I can make you one but for this I need information.
To get me this do the follow:

Install Terminal Emulator from Playstore
Open it and type su
Then unplug the receiver and type
dmesg >/sdcard/without.txt

Plug it in and type
dmesg >/sdcard/with.txt

Then send me this to files to [email protected]

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[etretti]

i got my flickering to stop with this rom: Geekbuying_TV01(CS968)_ap6210_20131122

but then i dont have any working wifi or bt.

trying to get a hold of this: http://pan.baidu.com/s/1frl9 but i cant seem to download it on any of my devices.

kinda loosing interest in this stick, will be in the trash soon...

[GVRnx]

Great!
But maybe there is a error.
When you plug usb cable you must plug cable in usb port on side, near antenna and micro sd.
so you go in loader mode for update firmware.
If you plug usb cable in rear usb, you will go in recovery... but it is no good for flash all firmware
Only in this mode work in my styck.
So you try in all mode...maybe there are some difference between stick.
normally the stick go in recovery if you plug the cable in power usb
and go in flasher mode if you plug in OTG usb
angelobiz

Hi Guys,

Strange, got mine a few days now, when I try to connect it to PC, I don't get any reaction at all from windows 7 x64. Not on the OTG nor on the 5DC usb port. In both cases the blue led is on. Tried it with original supplied usb cable and other ones, also tried it on other laptop (also windows 7 but x86)
With the Fn button I see it goes into recover mode, but nothing in windows what so ever.
Any ideas? Do you need to connect the 5V DC with adapter and the OTG with PC?

Thanks a lot.

[pursch]

Hi Guys,

Strange, got mine a few days now, when I try to connect it to PC, I don't get any reaction at all from windows 7 x64. Not on the OTG nor on the 5DC usb port. In both cases the blue led is on. Tried it with original supplied usb cable and other ones, also tried it on other laptop (also windows 7 but x86)
With the Fn button I see it goes into recover mode, but nothing in windows what so ever.
Any ideas? Do you need to connect the 5V DC with adapter and the OTG with PC?

Thanks a lot.

Disconnect all cables, hold the fn button and then connect otg cable only to the computer.
If power is connected too, the stick is not recognised correctly for flashing.

[GVRnx]

Disconnect all cables, hold the fn button and then connect otg cable only to the computer.
If power is connected too, the stick is not recognised correctly for flashing.

Thx for answer, but unfortunately no reaction from pc what so ever...
I've tried the reboot bootloader via terminal emulator to, but no success.

[pursch]

Thx for answer, but unfortunately no reaction from pc what so ever...
I've tried the reboot bootloader via terminal emulator to, but no success.

Did you try different USB ports? Because otg port is very close to the antenna, sometimes my USB plug was not connected correctly. With some light force I had to press the plug in to connect.
Sometimes the device was not recognised correctly anymore and I had to reboot my computer.

[GVRnx]

Did you try different USB ports? Because otg port is very close to the antenna, sometimes my USB plug was not connected correctly. With some light force I had to press the plug in to connect.
Sometimes the device was not recognised correctly anymore and I had to reboot my computer.

Yep, but only with supplied usb cable does the LED lit up when i connect it to the OTG. With all other cables (from cell phones) the stick gives no reaction at all when connected to OTG. they all fit niceley into the OTG port, because it is indeed very close to the antennas.