NEOMODE CUSTOM ROM 1.3 - MK802IV, UG007B, CX-919, MK809III with AP6210

[sashokmc]

Help! MK802 IV not booting, or booting very slowly, and squaring
Core 1080p no overclock.

[Skyback]

I have an issue with my CR9...

I'm currently using sam's 720p 1.8ghz with 800mhz gpu and 1400mhz ram (the cpu is underclocked to 1.6ghz) and I'm experiencing screen "failures". The stick does not reboot or shutdown but the hdmi signal is lost and recovered very fast almost like I removed and put it back. I already tried 2 different HDMI extensions but the problem persists... anyone with this problem?

[neomode]

I have an issue with my CR9...

I'm currently using sam's 720p 1.8ghz with 800mhz gpu and 1400mhz ram (the cpu is underclocked to 1.6ghz) and I'm experiencing screen "failures". The stick does not reboot or shutdown but the hdmi signal is lost and recovered very fast almost like I removed and put it back. I already tried 2 different HDMI extensions but the problem persists... anyone with this problem?

I would say this is too much for your Stick. Have you cooled to your CPU ?
800 MHz will not Work for all Devices also the Ram Speed.
Try another Kernel from Sam321.

Neomode

[Skyback]

I would say this is too much for your Stick. Have you cooled to your CPU ?
800 MHz will not Work for all Devices also the Ram Speed.
Try another Kernel from Sam321.

Neomode

My stick is not open but I have a fan pointed to the side where the CPU and Ram are. The device does not heat too much I think.

But which kernel would you recommend? I would bee happy with one that can play Full HD videos on XBMC. I tried all 1080p kernels but they lag too much (maybe XBMC problem, since mine is the August monthly build) so I went for 720p with overclocked GPU...

I really wanted to try a 1.6GHz CPU with 1000Mhz ram and GPU 600 Mhz (1080p and 720p versions)... but there are none...

[neomode]

Will try to make you one.

Neomode

[Skyback]

Will try to make you one.

Neomode

I would really appreciate it!

BTW are you currently working on this firmware?

[Borincano]

Tronsmart CX-919

I want to thank neomod for his ROM as it is the only one that will work on my device. I thought it was bricked after trying to flash the CX 919 firmware that was provided by geekbuying and the CR from finless. I am using an the 720 OC at 1.8/800/1400 with no problems or over heating. I tried the 1080 but the screen would not display properly, for example the play store under my apps they were all on top of each other and the details unreadable.

[neomode]

AW: NEOMODE CUSTOM ROM 1.3 - MK802IV, UG007B, CX-919, MK809III with AP6210

A new update of the Rom will come this week.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[neomode]

AW: NEOMODE CUSTOM ROM 1.3 - MK802IV, UG007B, CX-919, MK809III with AP6210

I want to thank neomod for his ROM as it is the only one that will work on my device. I thought it was bricked after trying to flash the CX 919 firmware that was provided by geekbuying and the CR from finless. I am using an the 720 OC at 1.8/800/1400 with no problems or over heating. I tried the 1080 but the screen would not display properly, for example the play store under my apps they were all on top of each other and the details unreadable.

I think this problem can be fixed.
For this you must change the DPI in build prop from 160 to 240.
To do this you can use a build prop editor from play store.

Neomode



Gesendet von meinem GT-I9305 mit Tapatalk 2

[Borincano]

Thanks but the 720 has better performance and is more stable. I have no lag or stutter and scored over 19 in antutu, I am looking forward to your update.

[K3v1]

Hey I have a question: Video Playback seems to be pretty good for me even in 1080p. But I have these strange slowdowns (1-2 full seconds) that occur every 15 seconds or so. Is that a common/known problem? Because I would guess that this has nothing to do with the general performance of the stick as that should be a constant low framerate or am I wrong? Because I could have sworn I did not have these with other Firmwares. I have a CX-919 with a RAM OC'ed kernel (its kinda the same with standard).

Thanks.

[Borincano]

I don't have any with the 720 but had some with the 1080 even when OC. I don't know why this is but like to stick with what works and I'm having no issues with my Tronsmart CX 919 with my current setup. I say just go back to a 720 from Sam and see how it performs.

[ulises1954]

hello all and thanks neomode for suporting the cx-919!

I have a new CX-919 that the PCboard inside says Ver.2.0, and would like to install your 720 OC 1.8/800/1400, but would like to know if this ROM works better or not than the latest Finnles ones?

Neomode, You mentioned that a new update of the Rom will come this week, whats new ?

[Borincano]

hello all and thanks neomode for suporting the cx-919!

I have a new CX-919 that the PCboard inside says Ver.2.0, and would like to install your 720 OC 1.8/800/1400, but would like to know if this ROM works better or not than the latest Finnles ones?

Neomode, You mentioned that a new update of the Rom will come this week, whats new ?

Is it a Tronsmart CX 919? If so I don't think finnless will work, I tried and no luck. Mine is a Ver2.0 also and I would to know what is different between the original CX 919. Is it the WiFi? And if so is that why finnles does not work?

[Somatom]

Re: NEOMODE CUSTOM ROM 1.3 - MK802IV, UG007B, CX-919, MK809III with AP6210

Hi!
I have a problem with my MK802IV and need a little help. First I flash the Vondroid_RKM_beta ROM, but not solved the video lag problem. After I flash this 1.3 ROM, with the tool, from zip.
1: erase idb
2: flash ROM
But write "download idb failed" message, und tsüsss. Here is the screenshot:

My stick is dead, or "only" krank? What can I make? I have the original rom, dmesg, CWM backup from Vondroid ROM, Batch tool, Flash Tool, Win, and Linux.
Sorry, for my bad english!


GT-I9100 (Wanam14.1-Dori8.41), Measy U2C (Finless1.7), MK802IV (AP6210, ROM???)