[ROM] Tanix TX9 Pro / Vorke Z6 Plus - based on Magendanz´s Vorke Z6 / Tanix TX92 Stock & Nano Nexus ROMs (Android 7.1)

[shqual]

Installed. At first boot was low resolution, but changed it to 1080 and all good. Works excellent. Fast and smooth. Only one thing i noticed. Clock display on device shows time upside down

[Deki]

Installed. At first boot was low resolution, but changed it to 1080 and all good. Works excellent. Fast and smooth. Only one thing i noticed. Clock display on device shows time upside down

Thank you for return, you have install OTA or full flash ?

[shqual]

Thank you for return, you have install OTA or full flash ?

.img by burning tool 2.0.8

[Deki]

.img by burning tool 2.0.8

Ok thank you

[shqual]

Low resolution back after every reboot. Any suggestions?)

[Deki]

not tested yet but personally i will try to use this custom rom just for authorized "leanback apps mod" and then switch back to the original tanix rom with google play ATV

[Alianato]

thank you

the first link is full img for update USB BURNING TOOLS
the second link is update for OTA
this is it correct ? I try tonight :-)

yes, precisely

[Alianato]

Low resolution back after every reboot. Any suggestions?)

see post number two, this problem arose also with the stock rom, I already tried some workaround without success, I also reported to Magendanz this issue, till the moment I did not find a solution but I still expect to be solved, one possibility would be to have a script that automatically changes resolution after boot to the desired one, so it's a work in progress

[Alianato]

Installed. At first boot was low resolution, but changed it to 1080 and all good. Works excellent. Fast and smooth. Only one thing i noticed. Clock display on device shows time upside down

about the LCD see post number #10

[shqual]

Guys from 4pda told me to backup system and data partition from current Android TV. Than burnback original firmware and restore that partitions onto original. If someone wanna to continue with experiments)

[promosign]

TANIX TX9 pro 3гб/32гб
inverted clock and the rest

https://yadi.sk/d/GyitjFzX3SUTEq

[promosign]

the problem with reset to 480p is not solved, the TV box itself is still on the way

[Alianato]

TANIX TX9 pro 3гб/32гб
inverted clock and the rest
https://yadi.sk/d/GyitjFzX3SUTEq

thanks, where did you get that from?
I would like to have more info on the subject

update: don't worry, I already know google translator is my friend
there is also a suggestion that the following will fix the low resolution problem after boot

in build.prop change the following

# sys.display-size.check = false
or
sys.display-size.check = true

I still had no time to try it but it's worth a shot

[Luca]

TANIX TX9 pro 3гб/32гб
inverted clock and the rest
https://yadi.sk/d/GyitjFzX3SUTEq

Thank you guys
How do I load this patch?
Work on z6 plus I guess, right?

[Alianato]

Thank you guys
How do I load this patch?
Work on z6 plus I guess, right?

I already tried the patch for the inverted LCD and it works fine, I can remove the tape :-)
the same I cannot say about the changes in the build.prop

the patch for the LCD is installed in the same way as the OTA, via TWRP, I did it for the Tanix TX9 Pro but should work the same with the Vorke Z6 Plus