H96 MAX X2 Amlogic S905X2 Android 8.1 4/32GB Dual Band WiFi Fast LAN BT

[ath156]

OK thanks so ubt or SD card?

I always suggest/prefer the UBT method !!! It is the safest method to install firmwares and anyway you may be obliged to use it if something goes wrong with the SD card method and BCM (and sometimes it does go wrong-due to a bad quality sd card or removing the card from the PC without using the safe removal or...........).
I know the SD card method is more convinient/easy to many users but .....................

[kipir]

UBT by v03.7

[minonano]

UBT by v03.7

Did you try v04.0?

[kipir]

unfortunately it didn't work for me v04.0

h96 max x2s use 2 separate firmwares mine is aml_s905x2_9_H96MaxX2_mac_wifi_

But I don't think there is any difference. so great it couldn't be better.

[romcrazy]

Did you try v04.0?

After installing 0.3.7 through UBT. Boot the box up and place the 0.4.0 fota zip in sdcard or usb drive.
Repove the power cord, take a pin and press hold reset button and attach power cord. the box will boot into recovery. Click on apply update and then on "update with sdcard" if you placed fota zip in sdcard. choose udisk if placed in usb. it will upgrade to 0.4.0. download fota zip from link

[minonano]

unfortunately it didn't work for me v04.0

h96 max x2s use 2 separate firmwares mine is aml_s905x2_9_H96MaxX2_mac_wifi_

But I don't think there is any difference. so great it couldn't be better.

Thanks

[minonano]

After installing 0.3.7 through UBT. Boot the box up and place the 0.4.0 fota zip in sdcard or usb drive.
Repove the power cord, take a pin and press hold reset button and attach power cord. the box will boot into recovery. Click on apply update and then on "update with sdcard" if you placed fota zip in sdcard. choose udisk if placed in usb. it will upgrade to 0.4.0. download fota zip from link

romcrazy Thanks tried it, but did not work, back to .0.3.7, appreciate your help.

[romcrazy]

romcrazy Thanks tried it, but did not work, back to .0.3.7, appreciate your help.

What did not work? I can do a video for you if you need. Personally I dont like the firmware. My air mouse lags like crap but still I can install it for you, let me know.

[minonano]

What did not work? I can do a video for you if you need. Personally I dont like the firmware. My air mouse lags like crap but still I can install it for you, let me know.

@crazyrom installed from recovery on SD card (external) as per your instructions then rebooted .all black no signal no led light. Had to unbrick short hand pins. Then reinstalled.0.3.7 with SD card maker (ubt will not work with this box).
Also which ROM are you using? Daiviet? Thanks but Ii wish slimbox had a ROM for it.

[romcrazy]

I dont know where you are getting your 0.3.7 which doesnt work with ubt.
Below are 4 videos. Video 1 is me flashing ugoosx3 rom 0.4.0 Link:

HK1PlusX3_v0.4.0.rar — ??????.???? (yandex.ru)

Video 2 is me testing ugoosx3 rom 0.4.0

Video 3 is me flashing 1920HzHK1Plus_aosp4gb 0.3.7 (Link given, if you flash some other file please dont blame me when upgrage doesnt work.)


1920Hz_HK1Plus_AOSP4Gb_v0.3.7.rar — Yandex.Disk

Video 4 is me upgrading to 0.4.0 via recovery. Link for aosph96_x2_v0.4.0_fota given

H96???_AOSP-ATV — ??????.???? (yandex.ua)

Video 1: Video1.mp4 - Google Drive
Video 2: Video2.mp4 - Google Drive
Video 3: Video3.mp4 - Google Drive
Video 4: Video4.mp4 - Google Drive

[romcrazy]

I dont know where you are getting your 0.3.7 which doesnt work with ubt.
Below are 4 videos. Video 1 is me flashing ugoosx3 rom 0.4.0 Link:

HK1PlusX3_v0.4.0.rar — ??????.???? (yandex.ru)

Video 2 is me testing ugoosx3 rom 0.4.0

Video 3 is me flashing 1920HzHK1Plus_aosp4gb 0.3.7 (Link given, if you flash some other file please dont blame me when upgrage doesnt work.)


1920Hz_HK1Plus_AOSP4Gb_v0.3.7.rar — Yandex.Disk

Video 4 is me upgrading to 0.4.0 via recovery. Link for aosph96_x2_v0.4.0_fota given

H96???_AOSP-ATV — ??????.???? (yandex.ua)

Video 1: Video1.mp4 - Google Drive
Video 2: Video2.mp4 - Google Drive
Video 3: Video3.mp4 - Google Drive
Video 4: Video4.mp4 - Google Drive

This post of mine is unapproved

[minonano]

romcrazyThanks, I will try again, also i noticed you are using the aosp, while i am using the atv, maybe that is why? regardless I will try the aosp and keep you posted, thanks for the effort.
Did you try yourself the ATV version of the 0.4.0???

[minonano]

romcrazy , wether I install your aosp or atv roms, i get the same results, was able to install .0.3.7, but never .0.4.0, thanks for your help, but please remember as Kipir said earlier, they are 2 different boxes with different firmwares and regardless of your assumption "I dont know where you are getting your 0.3.7 which doesnt work with ubt". You can read on 4PDA that lots of testers can only install .0.3.7 and not .0.4.0, thanks for trying to help.

[romcrazy]

romcrazy , wether I install your aosp or atv roms, i get the same results, was able to install .0.3.7, but never .0.4.0, thanks for your help, but please remember as Kipir said earlier, they are 2 different boxes with different firmwares and regardless of your assumption "I dont know where you are getting your 0.3.7 which doesnt work with ubt". You can read on 4PDA that lots of testers can only install .0.3.7 and not .0.4.0, thanks for trying to help.

My box is LPDDR4. I use aml version of stock rom. I hope that helps. Does 0.3.7 work flawless for you? Specifically the air mouse? Try to install with ubt while holding down reset. First time, that worked for me, usual flashing was failing at 3%

[gleamer]

Hello, i have this box but this chip is blown.

https://imgur.com/a/uEPLwaf

Is it possible to get details about what this type of chip is so i can replace it ? thanks