UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

[JugsteR]

Re: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

You mean 6 gb file for 1080P and not the 16GB file?

What I mean is this: Imagine two movies.
One is 720p, 30 minute long and 100 gigabyte big.
The other is 1080p, 30 minute long and 50 megabytes big.

The WiFi is quite capable of sending 50MB in 30 minutes. However it is impossible to send 100GB in 30 minutes.

It all comes down to what bit rate the movie is in. It doesn't matter what resolution is used.

Of you want to stream 1080p movies over WiFi, make sure the bit rate is low, low enough for the WiFi to handle it without interruptions.

Signature? Signature!

[michel30]

Yes I can. Try lowering the size of the file until it works.

Signature? Signature!

You mean 6 gb file for 1080P and not the 16GB file?

[michel30]

@michel30: tried the finless rom problem is still same it keeps flickering and now the mouse cursor is gone out of control too.....everything was fine when I first used it before rooting so must be the roms or settings playing up. Any way to unroot it to original stock

Sent from my SM-N9005 using Tapatalk

I don't know,
only here you can get a stock software, the latest, but the one from finless works better for me.
http://blog.geekbuying.com/index.php/2013/11/12/rom-download-new-stock-firmware-for-cx-919/#.UsH2OPTuK9E

[sanju_x20]

@michel30: tried the finless rom problem is still same it keeps flickering and now the mouse cursor is gone out of control too.....everything was fine when I first used it before rooting so must be the roms or settings playing up. Any way to unroot it to original stock

Sent from my SM-N9005 using Tapatalk

[JugsteR]

Re: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

so you can stream 1080P movies from your nas to this stick, without any problem? I can stream 720P without any problem, only the 1080P stops and it buffer and it stop so it look like it is to slow. How can I make it faster I have Asus RT66U router so and the signal is full but I always see on wifi connection 65mbs and that is with every firmare what I put in.

Yes I can. Try lowering the size of the file until it works.

Signature? Signature!

[michel30]

If it is too slow, it doesn't matter how big the buffer is basically. I mean you could buffer the entire file but I guess that is not what you mean.

It is about bit rate... If the bit rate is to high you won't be able to steam 480p movies.

So saying that 1080p doesn't work is wrong. It works great for me. However, the quality, due to the low bit rate, is not that great.

Signature? Signature!

so you can stream 1080P movies from your nas to this stick, without any problem? I can stream 720P without any problem, only the 1080P stops and it buffer and it stop so it look like it is to slow. How can I make it faster I have Asus RT66U router so and the signal is full but I always see on wifi connection 65mbs and that is with every firmare what I put in.

[JugsteR]

Re: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

Hello,

On the first page you can find the software, this works verry good.
Unzip it, and flash it in your HDMI stick.

I had the same problem with latest stock software, but with this software is it okay, also XBMC.
I make my stick 1080P software, but in the readme file stand how you can do it, standaard when you flash it will be 720P but on the WIFI you cannot play 1080P movie, it is just a bit to slow it needs more buffer.

Regards,
Michel

If it is too slow, it doesn't matter how big the buffer is basically. I mean you could buffer the entire file but I guess that is not what you mean.

It is about bit rate... If the bit rate is to high you won't be able to steam 480p movies.

So saying that 1080p doesn't work is wrong. It works great for me. However, the quality, due to the low bit rate, is not that great.

Signature? Signature!

[sanju_x20]

Thanx mate will try it

Sent from my SM-N9005 using Tapatalk

[michel30]

Hi all... new to the blog. I just updated my cx919 with cx-919-rk3188-T-4.2-6210-20130 and since then it is not working properly. The screen keeps flickering and internet doesn't work properly. Can someone please tell me how to undo the rooting process and take the stick back to factory settings.

Sent from my SM-N9005 using Tapatalk

Hello,

On the first page you can find the software, this works verry good.
Unzip it, and flash it in your HDMI stick.

I had the same problem with latest stock software, but with this software is it okay, also XBMC.
I make my stick 1080P software, but in the readme file stand how you can do it, standaard when you flash it will be 720P but on the WIFI you cannot play 1080P movie, it is just a bit to slow it needs more buffer.

Regards,
Michel

[michel30]

Can you try playing the file from the SDCard? If that works then maybe you can get a LAN adapter and try that.

1080p did not work well for me with the stock ROM, yet to try this.

Hello,

I can play from a local HD 1080P no problem.
It is not working on WIFI :-(

I have A usb LAN adapater, but I don't have a driver for this kernal 3.0.36+ only 3.0.8+ and I don't know how rebuild the driver to 3.0.36+ there are more users with the same lan adapter waiting that some have a driver for android.

[sanju_x20]

Hi all... new to the blog. I just updated my cx919 with cx-919-rk3188-T-4.2-6210-20130 and since then it is not working properly. The screen keeps flickering and internet doesn't work properly. Can someone please tell me how to undo the rooting process and take the stick back to factory settings.

Sent from my SM-N9005 using Tapatalk

[britoso]

Or is there a way to watch 1080P steam over the wifi with cx919?

Can you try playing the file from the SDCard? If that works then maybe you can get a LAN adapter and try that.

1080p did not work well for me with the stock ROM, yet to try this.

[michel30]

1080p

Hello,

Today I flash my cx919 with this software.

I used the 1080P and I try to connect to my nas to watch some movies.

Conclusion

DVD are okay with wifi stream

720P are okay with wifi stream

1080P not okay with wifi steam, It needs more buffer..
Is there a way to create more buffer for 1080P streams?
Or is there a way to watch 1080P steam over the wifi with cx919?

XBMC is also working on this one, but 1080P not

[britoso]

Edit:
It was the USB cable!! wtf!!!
The same cable worked for all my phones, but not for this CX-919.
Changed to my galaxy nexus cable and it worked the first time.

Note: The blue LED stays lit even though it is in flash mode for my CX-919

Here are the settings I used:



Works great so far. Thanks Bob.

[PsyDonia]

Thanks I have now Flash my stick and used the 720p mod some guy uploaded.
even I have the 1GB ram version from DX.com it seems to work great so far.
I read somewhere in this thread how to remove the bar at bottom so I dont see the clock and the home button and stuff. I have a remote for it so I dont need that bar at the bottom.
also the google search bar on the homescreen is that posible to remove also.
I want my homescreen clean with only apps i use.