UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

[amclean123]

I used the default settings and i use the power supply from my phone, that worked with the normal firmware.

The power supply from your phone is probably .5 amp and isn't big enough. Try the power supply that came with the android stick or get a 2.1amp from Amazon.

FYI the power supply from my iphone causes a reboot every couple of minutes.

[stiriba]

Don't overclock it and get a better power supply. My bet is the power supply is junk or your booting from a computer usb port that's under powered.

I used the default settings and i use the power supply from my phone, that worked with the normal firmware.

[amclean123]

I flashed my cx-919 today like the instructions. But my device keeps rebooting everytime after several minutes. What can i do about that?

Don't overclock it and get a better power supply. My bet is the power supply is junk or your booting from a computer usb port that's under powered.

[stiriba]

CX-919 keeps rebooting

I flashed my cx-919 today like the instructions. But my device keeps rebooting everytime after several minutes. What can i do about that?

[Jimandroidpc]

Cx-919 just arrived and flashed to finless 1.6b

Love it, however I used it all day and added some media apps..spotify, xbmc and then I rebooted maybe for the 5th time today and its stuck on the flashing lights w the android logo, any ideas? Should I just reflash?

[strider_mt2k]

Thanks! Much better performance now!

Applied 4.2.2 to my CX-919 gen 1 and it's working better than ever!
I even messed it up the first time, but I just re-flashed per the instructions and it was all good.

As a yardstick I'm running an Amazon video using Firefox and Flash with zero problems.
Very impressive!

Thanks for making a good thing better!

[losl]

No need to root first. Erase your rom and flash with Finless 1.6b

Thank you !

losl

[amclean123]

My CX919 is not rooted and i flashed it to the stock 4.2.2 rom. Should i root my device prior to flash "4.2.2 - Finless rom 1.6B" ?

Thank you !


losl

No need to root first. Erase your rom and flash with Finless 1.6b

[losl]

My CX919 is not rooted and i flashed it to the stock 4.2.2 rom. Should i root my device prior to flash "4.2.2 - Finless rom 1.6B" ?

Thank you !


losl

[amclean123]

Is there a reason why my WiFi signal is only 18mbps max even with the AP right next to the cx919?

Make sure you don't have any wireless mice or keyboards conflicting with it. I had to use a usb extension cable with my wireless mouse in order to get the receiver away from the CX919. Also, I don't get very good speed with the Finless Roms. The Neomode 1.3 rom and the Sam321 Kernels seem to give the best wifi speed.

[maddealhunter]

Is there a reason why my WiFi signal is only 18mbps max even with the AP right next to the cx919?

[BP-isMe]

Thank You

I'll look at the pointer stuff.

[FadeFx]

AW: UPDATED - CX919 - 4.2.2 - Finless ROM 1.6b

Hello All,

I just signed up on this board. I've been watching it for a month now after ordering my CX919 stick. I really appreciate all of the hard work that happens here. In fact, that is what convinced me to get the stick as I saw there is an active support community.

I have a couple of questions about Bob's 1.6b ROM

1. Is there a way to change the cursor?

2. Are there any known issues with CrossBreeder with this ROM? I did flash CrossBreeder (after flashing CWM Recovery) and it seems to work well. I get an Entropy of 4096. Just wondering if others had some experience with it.

Thank You all again.

Brad

Hi,

1. It is quite easy to change the mouse pointer, just install 7zip on your pc and change the mousepointer in the file ;system/framework/famework-res.apk
In the folder /res/drawable-mdpi/pointer-arrow.png
i am not totally sure about the filename thou, but the path is correct...

2. Forget about cross breader, it only causes more snappyness on the devices because generating entropy causes higher cpu load and the cpu is on higher frequency step while ideling

_________________________
tapatalked from GalaxyS3

[peety]

Strange

Bob, It looks like the "Internal Memory Error, Format SD Card OK?" bug still exists in 1.6b
I just got this. I leave my stick always on.

rebooting fixed the issue, for now.

.///// I have not updated to 1.6b..Still on 1.5...But, I have never had this issue on 1.5....I opened my stick to run the 400mhz kernel. Inside on board. It has cx919 ver1.1--I leave stick on except for occasional reboot..Wonder why some do??

[britoso]

Bob, It looks like the "Internal Memory Error, Format SD Card OK?" bug still exists in 1.6b
I just got this. I leave my stick always on.

rebooting fixed the issue, for now.