Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic S905X3)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Sounds good, so the ugoos fw suits to his one? I will have closer look on the chipsets (WIFI, LAN, DDR) and provide information

    Comment


      Originally posted by soldiaz View Post
      Sounds good, so the ugoos fw suits to his one? I will have closer look on the chipsets (WIFI, LAN, DDR) and provide information
      Here is the ATV version 0.4.2 from AOSP version : https://mega.nz/file/R4EUxBiY#jS1fbg...X2lZJWwI7jnUBg

      **Note1: This must be suitable for all TVboxes of this "family" with Gigabit Lan. It is not suitable for HK1 Box with 100MB Lan !! It is not suitable also for H96 max X3 with Blue Board and wifi module IT6334 (everything will be fine except wifi).
      **Note2: Since you have 1.000MB Lan there should not be any problem with this rom (probably you will not get a brick), but you may have problem with wifi (if you have a wifi module similar to IT6334)
      **Note3: Your TVBox must be a "copy" of my H96 max X3 where I use 0.4.2 AOSP, but my board is Green (wifi problems are with some of H96 with Blue Board).
      Whatever you do, you are doing it at your own risk. Good Luck.

      Comment


        Hehe thanks, I opened the Box it is a blue pcb with these specs:


        Ram: 4GB DDR3 Hynix hstq4g83afr

        Wifi: hk 5230 zx190916

        Lan: rtl8211f

        Emmc: Samsung klmbg4gend b031


        Click image for larger version

Name:	IMG-20220429-WA0013.jpg
Views:	551
Size:	135.0 KB
ID:	829169
        Last edited by soldiaz; 04-29-2022, 12:18.

        Comment


          Originally posted by ath156 View Post

          This is the stock firmware. If you buy this TVbox just say it and I will give you some more links. Also state if you prefer AOSP or ATV.
          I just got this one:
          HK1 X3 Android 9.0 4+64GB TV Box Amlogic S905X3 2.4G+5G WiFi 4K Set Top

          as seen here (scroll down on site): https://www.****.de/itm/115333681292?var=415383532172

          It is the same Box like soldiaz

          However, I have 4/64 GB and 100MB Ethernet.

          I guess I am going for an ATV ROM, since I am coming from a Fire-TV Stick and am used to it. I basically only use Kodi to watch TV and stream Videos from my Network-Harddisk.

          So I guess I have no need for "Open Source" for now.

          Comment


            Sure it is 100mbit? Which LAN chip is on it?

            Comment


              I created another thread for the round one:

              Decided to create own thread since I dont know wether is same like rectangle one. Stock Firmware supposed to be these: 32GB ROM version STOCK initial HK1_X3_S905X3_2019-11-23.zip HK1_X3_S905X3_1000M_U212_9.0.2019.11.23.18.29.img https://drive.google.com/u/0/uc?id=18yFXnEv-awubFjS3fuEH2g2DJ9mx6E8C&export=download


              I linked the 64GB unit as well, but it is for Gigabit LAN

              Comment


                Originally posted by soldiaz View Post
                Sure it is 100mbit? Which LAN chip is on it?
                The Vendor said its 100Mbit, but...

                On the chip it says:
                RTL 8211F
                1310CH1
                G1.11

                which should be a Gigabit chip ??

                When I make a Internet Speedtest I get more than 100Mbit upload speed.

                Click image for larger version  Name:	LAN Chip.jpg Views:	0 Size:	130.9 KB ID:	829392

                Comment


                  hello admin can you please tell me
                  which version is for my device ?
                  my h96max x3 is blue board but there is no mention 'it 6334' in wifi chip
                  ​​​​​​​thank you
                  You may only view thumbnails in this gallery. This gallery has 1 photos.

                  Comment

                  Working...
                  X