K-R42 - wasser firmware - JB Android 4.2.2

[pomdeejai]

CS918 K-RK3188_V3.5.rar 233.0 MB (7warranty.com)

[pomdeejai]

CS918 TN-BX09_V2.1.rar 233.8 MB (7warranty.com)

[digger]

CS918 TN-BX09_V2.1.rar 233.8 MB (7warranty.com)

pomdeejai,
The best firmware for this board is k-r42-old_revision-wasser-1.2.3 with kernel-k_r42_old_revision_cpu1800h_ddr800_1080p_gpu600h.
I have never seen any FW for this device faster than 20859 AnTuTu for 1080p.
Try your link, compare and share your results.

[no_spam_for_me]

1.) better than "kernel-k_r42_old_revision_cpu1920h_ddr800_1080p_gpu600h.i mg"?
2.) I don't want to diss you, but was the " kernel-k_r42_old_revision_cpu1800h_ddr800_1080p_gpu600h.i mg" with PSU 2 Amp stable, or why do you try another PSU and took unfortunately the wrong Voltage? (I have an 3 Amp PSU from a D-LINK router..)

[digger]

1.) better than "kernel-k_r42_old_revision_cpu1920h_ddr800_1080p_gpu600h.i mg"?
2.) I don't want to diss you, but was the " kernel-k_r42_old_revision_cpu1800h_ddr800_1080p_gpu600h.i mg" with PSU 2 Amp stable, or why do you try another PSU and took unfortunately the wrong Voltage? (I have an 3 Amp PSU from a D-LINK router..)

1) Wasn't stable for my device.
2) Was stable absolutely but with good 5V/4A PSU.

I frashed this beautiful board accidentaly with 12V PSU from my Keenetic router, who had the same shape as my 5V/4A

[smokie171]

minix neo x7

Will this firmware work on my minix neo x7? If so which kernel should i use? Thanks, kevin

[gotpaste]

K-R42 Old Mac Address

I have 3 k-r42 old revisions with 1.2.4 installed. All 3 devices have the same mac address on the local lan adapter...how do I change the mac address or is this something that has to be fixed in the firmware. Everything else works great.

[no_spam_for_me]

I have 3 k-r42 old revisions with 1.2.4 installed. All 3 devices have the same mac address on the local lan adapter...how do I change the mac address or is this something that has to be fixed in the firmware. Everything else works great.

http://www.freaktab.com/showthread.php?7369-Same-device-other-name-(AC8350-BX09)&p=108521&viewfull=1#post108521

http://www.freaktab.com/showthread.php?5957-K-R42-Hybrid-Firmware-(HFW)-1-1-0-by-lewy20041&p=97827&viewfull=1#post97827

[gotpaste]

k-r42 Mac Address

http://www.freaktab.com/showthread.php?7369-Same-device-other-name-(AC8350-BX09)&p=108521&viewfull=1#post108521

http://www.freaktab.com/showthread.php?5957-K-R42-Hybrid-Firmware-(HFW)-1-1-0-by-lewy20041&p=97827&viewfull=1#post97827

This did not seem to work unless I did it wrong. This is also for the Ethernet adapter instead of the WIFI.

[no_spam_for_me]

But you wrote:

All 3 devices have the same mac address on the local lan adapter...how do I change the mac address or is this something that has to be fixed in the firmware. Everything else works great.

[no_spam_for_me]

This did not seem to work unless I did it wrong. This is also for the Ethernet adapter instead of the WIFI.

Perhaps "macman.apk"

This application can change mac address of your wireless adapter
************** REQUIRES ROOT *************
Features
1. Manage multiple mac addresses/profiles.
2. Turn off mac changing.
3. Changes mac address when wireless turned on by the android.#mac address changer

[gotpaste]

MAC Address

But you wrote:

I may not have been specific enough. I have 3 K-r42's old revision. Recently I installed Wasser 1.2.4 1080p boot and kernel on the device. I have them hooked up via hardwire to the Ethernet port. All 3 devices show the same MAC address so they are all conflicting with each other on the network. I see in 1.2.4 it says user can change mac address in the notes but does not explain how to do so. I followed the directions above but that appeared to be for the WIFI adapter and not the LAN adapter. It also didn't seem to work for the WIFI. I really like this rom as everything is very smooth and seems to work great with latest xbmc nightly. Any help would be greatly appreciated. Looking for a permanent solution as I have seen some things about spoofing the MAC but that looks like it only happens until the device is rebooted. If there is another kernel I need to flash please let me know where to locate. Thanks Again

[no_spam_for_me]

I see in 1.2.4 it says user can change mac address in the notes but does not explain how to do so. I followed the directions above but that appeared to be for the WIFI adapter and not the LAN adapter. It also didn't seem to work for the WIFI. I really like this rom as everything is very smooth and seems to work great with latest xbmc nightly. Any help would be greatly appreciated. Looking for a permanent solution as I have seen some things about spoofing the MAC but that looks like it only happens until the device is rebooted. If there is another kernel I need to flash please let me know where to locate. Thanks Again

Of cause I think it is for LAN
"... which allows constant Ethernet MAC address ..." (frist link)
or
" ... Second method require creation of file containing LAN MAC adress: /data/misc/wifi/wlan_mac ..." (second link; including explanation why you don't get different or constant mac-addresses at LAN
)
(the kernel read the file /data/misc/wifi/wlan_mac)
and yes because of this it didn't work for WIFI (but don't ask me wy the calling is "wlan_mac" at folder "wifi")

What I don't really know, but I don't think so, perhaps wasser has it removed form newer release...

[gotpaste]

MAC Address

firmware-1.2.3 supports static ethernet mac adress. for static mac adress you should add it in /etc/ethernet-mac

Found this back in the thread. Although this did not seem to set the mac to what I wanted, it did make it generate a new one which fixes my issue. Thanks all who tried to help

[wasser]

I may not have been specific enough. I have 3 K-r42's old revision. Recently I installed Wasser 1.2.4 1080p boot and kernel on the device. I have them hooked up via hardwire to the Ethernet port. All 3 devices show the same MAC address so they are all conflicting with each other on the network. I see in 1.2.4 it says user can change mac address in the notes but does not explain how to do so. I followed the directions above but that appeared to be for the WIFI adapter and not the LAN adapter. It also didn't seem to work for the WIFI. I really like this rom as everything is very smooth and seems to work great with latest xbmc nightly. Any help would be greatly appreciated. Looking for a permanent solution as I have seen some things about spoofing the MAC but that looks like it only happens until the device is rebooted. If there is another kernel I need to flash please let me know where to locate. Thanks Again

you can set the static mac address in /etc/ethernet-mac. After the change you have to reboot your box.