NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

I think depending on Time plan this week.
Neomode

Send from the TARDIS

[rceccleston]

Does anyone else have a problem with no audio playback on the 720p version?

Sent from my M6 using Tapatalk 4

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

I have make a test run and for me it works. Please go to settings and then sounds and check the output config.

Neomode

Send from the TARDIS

[rceccleston]

I have make a test run and for me it works. Please go to settings and then sounds and check the output config.

Neomode

Send from the TARDIS

Sorry, audio had to be on 'pass through' and required a reboot.

Sent from my M6 using Tapatalk 4

[bvdbergh]

artifacts on mk809 iii

I have installed both versions the 720 and later the 1080. But I see artifacts on my display. I have an mk809III. Did I do something wrong of is this version not compatible with my mk809 iiI Keep up the good work

[ADerrik]

Hi Neomode.

I have a mk809III and I used your ROM "nhr_18_ap6210_1080.zip".

First I erased IDB and then I run the tool and I got an error (see following picture)



Re-running the tool everything goes fine, without errors.

Re-doing all the steps several times I verified that only the second time I run the tool I don't get any errors and everything seems to be OK.

What I'm doing wrong??
Has my mk809III been updated??

Many Thanks
ADerrik

A further question:

I opened the "package-file" and I've checked that the Kernel line is commented:

# NAME Relative path
#
#HWDEF HWDEF
package-file package-file
bootloader RK3188Loader(L)_V1.20.bin
parameter parameter
misc Image/misc.img
#kernel Image/kernel.img
boot Image/boot.img
recovery Image/recovery.img
system Image/system.img
# ҪдÈëbackup·ÖÇøµÄÎļþ¾ÍÊÇ×ÔÉí£¨update.img£©
# SELF Êǹؼü×Ö£¬±íʾÉý¼¶Îļþ£¨update.img£©×ÔÉí
# ÔÚÉú³ÉÉý¼¶Îļþʱ£¬²»¼ÓÈëSELFÎļþµÄÄÚÈÝ£¬µ«ÔÚÍ·²¿ÐŠϢÖÐÓмǼ
# ÔÚ½â°üÉý¼¶Îļþʱ£¬²»½â°üSELFÎļþµÄÄÚÈÝ¡£
# RESERVED²»´ò°übackup
backup backupimage/backup.img
update-script update-script
recover-script recover-script

Is it correct or I need to uncomment the kernel line before running the Flash Tool??

[ulises1954]

Differences Between the 720 and 1080 versions?

Today I will install this new 1.8 ROM in my CX-919 with 4GB Parameter File, but I want to ask those who have already installed and tested the 720 and 1080 versions, which differences in efficiency and speed have noticed between these two versions?


What about video Display speed with the 1080 version... How it behaves?


Has anyone tried theLatest Netflix APP...How it works and looks in the 1080 version?


Thank you in advance!

[Gh0stw4lk3r]

I am having the same problems as i was having on 1.7
the rom installs fine and boots fine the first time, it has been running perfect since yesterday including wifi and the rest of the little things they put in that thing.
i needed to reboot the device and i am stuck in a bootloop again.
Finless worked for a few reboots but then also stuck in a bootloop.
If i flash the rom again, everything works fine untill i need to reboot, the the infinite bootloop is back. i didn't install any apps whatsoever after the second flash

Really can't stand it that i cannot figure out what is causing this, i hope some of you can help me out?
The only rom that works fine with reboots is the standard rom, but that rom has video playback issues.

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

Hello,

As I see on your Pictures I have the same Device at home. I have test my Rom with it and have no errors.
But i will test it again and will see If I can have the same failure like you.

Neomode

Send from the TARDIS

[djisasi]

Hi! I have the same problem as you. Did you fix it?

Hi Neomode.

I have a mk809III and I used your ROM "nhr_18_ap6210_1080.zip".

First I erased IDB and then I run the tool and I got an error (see following picture)



Re-running the tool everything goes fine, without errors.

Re-doing all the steps several times I verified that only the second time I run the tool I don't get any errors and everything seems to be OK.

What I'm doing wrong??
Has my mk809III been updated??

Many Thanks
ADerrik

A further question:

I opened the "package-file" and I've checked that the Kernel line is commented:

# NAME Relative path
#
#HWDEF HWDEF
package-file package-file
bootloader RK3188Loader(L)_V1.20.bin
parameter parameter
misc Image/misc.img
#kernel Image/kernel.img
boot Image/boot.img
recovery Image/recovery.img
system Image/system.img
# ҪдÈëbackup·ÖÇøµÄÎļþ¾ÍÊÇ×ÔÉí£¨update.img£©
# SELF Êǹؼü×Ö£¬±íʾÉý¼¶Îļþ£¨update.img£©×ÔÉí
# ÔÚÉú³ÉÉý¼¶Îļþʱ£¬²»¼ÓÈëSELFÎļþµÄÄÚÈÝ£¬µ«ÔÚÍ·²¿ÐŠϢÖÐÓмǼ
# ÔÚ½â°üÉý¼¶Îļþʱ£¬²»½â°üSELFÎļþµÄÄÚÈÝ¡£
# RESERVED²»´ò°übackup
backup backupimage/backup.img
update-script update-script
recover-script recover-script

Is it correct or I need to uncomment the kernel line before running the Flash Tool??

[ADerrik]

Hi! I have the same problem as you. Did you fix it?

Hi!

I've just re-run the flashing tool (pressing RUN again). I didn't get any error but I'm not sure if it worked.

I can only check it tonight at home.

I'm concerned it is not the right method to flash a ROM.

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

Make first Erase IDB then Flash it.

Neomode

Send from the TARDIS

[djisasi]

In my case, I tried to re-run, but it does not work. Several times. To recover it, I have to install an official version.

Hi!

I've just re-run the flashing tool (pressing RUN again). I didn't get any error but I'm not sure if it worked.

I can only check it tonight at home.

I'm concerned it is not the right method to flash a ROM.

[djisasi]

I did it, but it did not work. And it is not the first time. I can not install any NEOMODE-version. I have Mk802IV(new version). And always the same. When the program want to check the installed version, I get the error.

Make first Erase IDB then Flash it.

Neomode

Send from the TARDIS

[raplus]

I have one question. It happens just in every 1080 rom, that sometimes i lose hdmi signal (black screen) for 3 seconds and than it comes back. Is it charger related?