NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

[basmand]

No worry. This means not that the MK802 IV became no Update, I will only seperate the MK809III from the Hybrid Rom.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Hi

Great!! I think at all this will be a great week!

Basmand

[ulises1954]

Right now i making a Rom only for the MK809III. Will release it this Week.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Don't know if it is to much to ask, But if you have completed some of the ROMs, why not sending first those that are finished, so we can all start testing how it works?


I am aware that you are having problems and setbacks to Fix and Finish all the separate versions of the ROM... So I do not want to press you to much!


It is only a suggestion, so you can upload the ROM one by one...


Thanks again for all your efforts and hard work!!

[EzerchE]

Did anyone tried tis rom with MK908 v3?

[apez]

Did anyone tried tis rom with MK908 v3?

I and not working if your are talking about 1.8 with MK809III (I suppose that I have a third version).

[apez]

Could you please share PSU kind that you are using now ? I'm using the PSU that is included into the product box (2A).
Let me know please (maybe the performance issues is caused for this reason).

[neomode]

AW: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

You need a good 3A Psu.
No China Crap.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

[apez]

You need a good 3A Psu.
No China Crap.

Neomode

Gesendet von meinem GT-I9305 mit Tapatalk 2

Good notice, maybe this could be a cause of black flickers screens in 1080P mode.

[packetlos]

Good notice, maybe this could be a cause of black flickers screens in 1080P mode.

I get it too and I have a 3A power supply, it started with the Rikomagic ROM that was released in July that some of the modified ROM's are based on. Didnt have the issue before with either a 2A or 3A psu.

[apez]

I get it too and I have a 3A power supply, it started with the Rikomagic ROM that was released in July that some of the modified ROM's are based on. Didnt have the issue before with either a 2A or 3A psu.

Ah ok, so I'll keep the 2A PSU.
What rom are you using and for which product ?

[packetlos]

Ah ok, so I'll keep the 2A PSU.
What rom are you using and for which product ?

I tried loading Neomode's 1.8 on a 809IV but I guess i have version 3 as it didn't work. Not running anything at the moment as I am waiting for 1.9.... no pressure Neomode

[mechaone]

Re: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

Neomode: The 1.8 ROM is working fine w/ Sam's 720 kernels on MK802iv, correct?

Apez: Buy a decent PSU. A good quality unit will not only deliver sufficient current when draw reaches peak but will also provide stable, clean power.
I personally use a single port 2.1A iLuv iAD517, and a dual port 1A + 2.1A Scosche USBH3. They have both surpassed the capabilies of both my factory RKM power supplies, and the two similar 2A units I purchased from Geekbuying. You don't necessarily have to spend a lot of money. Only paid $10cad for the good ones @ a local discount merchant.



Sent from my XT925 using Tapatalk

[meinbier]

Hi, I cannot install the 1.8 into my MK809III, with all cutoms roms I've problem with 1080p , when I set any 1080p mode screen is flickering.

Could you please refer me your installation procedure for 1.8 ?
Thanks in advance

Hi,
i´ve flashed it now a coupe times. Still same problems.
Now i´m waiting for neomodes 809III Image.

Flashing procedure was the "normal ".
download from this

http://www.freaktab.com/showthread.php?8391-NEOMODE-HYBRID-ROM-1-8-MK802IV-UG007B-CX-919-MK809III-J22-and-others-with-AP6210&p=116203&viewfull=1#post116203

RKAndroidtool started
aktivated point 1-7
device connected to the TV
turn of the device and unplug all usb connections (from PC and Power)
holding the reset/bootloader button
and plug Power in
still holding vor 3 sek
relealise reset und connect usb to pc
RKA.Tool shows device found
Run
That´s it

[apez]

Hi,
i´ve flashed it now a coupe times. Still same problems.
Now i´m waiting for neomodes 809III Image.

Flashing procedure was the "normal ".
download from this

http://www.freaktab.com/showthread.php?8391-NEOMODE-HYBRID-ROM-1-8-MK802IV-UG007B-CX-919-MK809III-J22-and-others-with-AP6210&p=116203&viewfull=1#post116203

RKAndroidtool started
aktivated point 1-7
device connected to the TV
turn of the device and unplug all usb connections (from PC and Power)
holding the reset/bootloader button
and plug Power in
still holding vor 3 sek
relealise reset und connect usb to pc
RKA.Tool shows device found
Run
That´s it

Many thanks for your answer, what's problems are "Still same problems" ?
You too have a MK809III ?

[Bertin]

A stupid question:

how have I to connect mk802IV to PC via USB to install the Neomode ROM? Which usb port must be connected?

Thanks to everybody.

[rceccleston]

Re: NEOMODE HYBRID ROM 1.8 MK802IV UG007B CX-919 MK809III J22 and others with AP6210

A stupid question:

how have I to connect mk802IV to PC via USB to install the Neomode ROM? Which usb port must be connected?

Thanks to everybody.

The firmware is flashed through the OTG port.

For easy of flashing...

1 - Launch the flash tool without the cable connect to your laptop / PC.

2 - Connect the USB cable to micro USB port on the mini labeled OTG.

3 - Hold the little button in on the mini PC while inserting the USB cable into your laptop / PC.

4 - Release little button after a few seconds once recognised by flash tool.

Sent from my Nexus 4 using Tapatalk