UPDATE - K-R42 - wasser firmware - Kikat Android 4.4.2

[Tommya2004]

K-RK3188-V4.3 wifi not turning on

I flashed with the new revision should it have been the old?

[wasser]

I flashed with the new revision should it have been the old?

there are too many clones of t-r42 which have different hardware components inside. So i cannot tell you which firmware, so please try the old one

[digger]

Hi wasser,
It definitely was something wrong with my tired head yesterday when I tried to overclock your kernel.
I had two kernels pulled out from the ROM but by different ways. First kernel was taken by using
dd if=/dev/block... command and second one with wendal software.
It was expected to use wendal output for overclocking, but I wrongly used another one.
So I have tried to redo my experiment today and I managed to obtain working overclocked kernels using d33's script with little changes which were implemeted by me yesterday.
So what I have now with kernel_cpu1704h_gpu798h_ddr800 is here

and several significant lines from dmesg too

<5>[    0.000000] Linux version 3.0.36+ ([email protected]) (gcc version 4.7 (GCC) ) #5 SMP PREEMPT Wed Jun 4 14:11:53 CEST 2014
.
.
<4>[    0.914323] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 6000
<4>[    0.914432]         adjust table freq=[COLOR=#ff0000]1704000[/COLOR] KHz, index=1375000 mV to index=1350000 mV
<4>[    0.914499] efuse_version_val: efuse version = 51
<4>[    0.914541] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 6000
<4>[    0.914603]         adjust table freq=[COLOR=#ff0000]594000[/COLOR] KHz, index=1375000 mV to index=1350000 mV
.
.
<6>[    2.111325] ddrfreq: normal 792MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 220MHz
<6>[    2.112201] ddrfreq: change freq to [COLOR=#ff0000]792[/COLOR] MHz when normal
.
.
<4>[    4.679012] Mali: mali freq table :Mali: 297,Mali: [COLOR=#ff0000]594[/COLOR],Mali: [COLOR=#ff0000]594[/COLOR],Mali:

Everything good enough with CPU and DDR OCing, BUT I CAN'T OVERCLOCK GPU. It remains to be locked at 594MHz.
I don't know why it is happening, but mali_dvfs always shows me:
297,594,594
It doesn't matter which kernel I use.
What do you think about it?
Kind regards

[Tommya2004]

Gave in

there are too many clones of t-r42 which have different hardware components inside. So i cannot tell you which firmware, so please try the old one

Hi a gave in and went bk to your 1.2.4

[endera]

ap6210

Do you have support wifi ap6210 ????

version 1.0.3

- K-R42 new and old revision support
- perfect 1080p fullhd video streaming
- multiuser support
- busybox up to date
- google apps up to date
- screen rotation support
- reboot/sleep/bootloader mode dialog
- add TVOUT support
- full support stock ir remote
- lock screen support
- preload wasser xbmc-1.1 based on gotham 13.1 stable release
- passthrough support in wasser xbmc
- add setting for Accessibility
- add setting for sleep, daydream and wallpaper
- add support for Mouse Wheel Zoom Settings
- add support for no wakup on mouse movement, enable it by default
- add manual hide system bar, you can wipe from bottom/top of screen to show it again
- add setting for Alarm/Notifications volume
- add support hls streaming
- fixed red frame issue in chrome browser
- added option to disable the hardware keyboard (add ro.hardkeyboard.support=false to
/system/build.prop to disable hardware keyboard )
- several fixes which i don't remember

firmware for new revision: wasser-firmware-kikat-kr42-new-1.0.3.zip
firmware for old revision: wasser-firmware-kikat-kr42-old-1.0.3.zip
please use RKBatchTool to flash the new firmware

version 0.92


- Ugoos Ut1, k-r42, t-r42 and MinixX7 (all revision support, please select the correct kernel)
- Kikat 4.4.2
- wifi support
- ethernet support
- init.d support
- rooted
- ntfs, nfs, iso, cifs filesystem support
- preinstall es file manager, reboot
- cwm recovery
- 1080p24hz, 1080p30hz, 1366x768p60hz support


Link download:

http://www.freak-tab.de/wasser/firmware-wasser-0.92-4.4.2.zip

version 0.91

- k-r42 old revision support
- k-r42 new revision support ( you have to flash this kernel after firmware flash)
- based on android 4.4 (kikat)
- wifi support
- ethernet support
- init.d support
- rooted
- ntfs, nfs, iso, cifs filesystem support
- preinstall es file manager
- new kernel, fix tv-out and hdmi bugs
- cwm recovery
- 1080p24hz, 1080p30hz, 1366x768p60hz support
- fixed high CPU load from rk_rtl_gc process

Link download:

http://www.freak-tab.de/wasser/k-r42-wasser-kikat-0.91.zip

http://www.freak-tab.de/wasser/k-r42-new_revision-kernel.img

version 0.90

- k-r42 old revision support
- k-r42 new revision support ( you have to flash this kernel after firmware flash)
- based on android 4.4 (kikat)
- wifi support
- ethernet support
- init.d support
- rooted
- ntfs, nfs, iso, cifs filesystem support
- preinstall es file manager
- new kernel, fix tv-out and hdmi bugs
- 1080p24hz, 1080p30hz, 1366x768p60hz support

Link download:

http://www.freak-tab.de/wasser/k-r42-wasser-kikat-0.91.zip

http://www.freak-tab.de/wasser/k-r42-new_revision-kernel.img

please post your feedbacks, it's very important!

Be aware: it is your own risk!

[no_spam_for_me]

It was expected to use wendal output for overclocking ...

Nice to read!
Would you like to attach the modified script?
BTW: what score without OC?

[digger]

Nice to read!
Would you like to attach the modified script?
BTW: what score without OC?

I have about 19200 with default kernel.
Here is modified script
overclockomatic_kk1.zip

[okhulto]

How do I re-use the original remote control of my DX05 Jesurn this firmware?
thank you

[griffdaddy]

Installed this last night and everything seems to run really smoothly. The only problem is that pass through still doesn't work in xbmc. I have it enabled in Android settings and when I turn it on in xbmc it force closes. Anyone got any ideas? My k-r42 is connected to an onkyo amp

[wasser]

Installed this last night and everything seems to run really smoothly. The only problem is that pass through still doesn't work in xbmc. I have it enabled in Android settings and when I turn it on in xbmc it force closes. Anyone got any ideas? My k-r42 is connected to an onkyo amp

dts passthrough is disable in wasser xbmc by default, you have to enable it in
Settings->System->Audio ouput->Enable passthrough
You have to set Setting level (Settings->system) to expert and set Outpur configuratiion to Best Match to get this option

[Bionicman]

1. yes, it's issue in kernel, i can try to fix it in kernel, are you willing to test the new kernel?

2. i have this tool to flash the mac address, i can uploade it so everyone can flash it.

wasser

The answers are YES and YES !!!

[pavlik]

So what I have now with kernel_cpu1704h_gpu798h_ddr800 is here

Could You upload your kernel?

[endera]

wasser

Do you have support ap6210 wifi and bluetooth ????

board name
rk3188_box_szy_x6
v1_0 131024

This is a links to board photos:

http://yadi.sk/d/Ad6UpNJCEmwDs

http://yadi.sk/d/wFnnCNJIEmwD5

http://yadi.sk/d/UngI3VfdEmwCL

[QuAn64m]

it's included in 1.0.3 firmware!

Ohh ... sorry! i didn´t notice that the droidmote didn´t habe the root rights .. Sorry !

[newhousik]

I have about 19200 with default kernel.
Here is modified script
[ATTACH]6658[/ATTACH]

thanks for the script