Pipo M6 Pro RileyROM 1.5

[leboeff]

what can i do?

but cwm does not come only with riley but in all roms.

No matter if I flash with rockchip tool or ROM_flash_tool_137.

is all the same problem.

everytimes the stupid CWM.

[nodabble]

what can i do?

but cwm does not come only with riley but in all roms.

No matter if I flash with rockchip tool or ROM_flash_tool_137.

is all the same problem.

everytimes the stupid CWM.

It can be difficult for people to advise when they can't actually see what's going on first hand. You've done well to upload photos and screen shots, so I have a suggestion that may help... Why don't you video what you are doing - showing the tablet and the software - and then upload it to somewhere like Youtube or Vimeo. Post the link here and wait to see if anyone can spot anything significant. It's worth a go given the position you are currently in.

[leboeff]

nice tip. thanks

tomorow i make a video.

have a nice day at all.

[Satbeginner]

Just a thought

what can i do?

but cwm does not come only with riley but in all roms.

No matter if I flash with rockchip tool or ROM_flash_tool_137.

is all the same problem.

everytimes the stupid CWM.

Just to be sure: You perform a normal pin-reset after flashing a ROM?
And not the three finger salute? (VOL+, ESC, Power, pin)
This way you would force the tablet into CWM.

So just the pin-reset (no buttons), although it should boot normally after flashing.
The first time you would see the little green letters formatting the partitions etc. , but this is just one time.

[heisenberg]

Dead after deep sleep - solved

NTFSing the external sd-card, few days ago, since then no more resets needed after deep sleep.

Thanks for the good advice!

[joeyyao]

Auto Pause and Auto Start whn removing headset

Hi, I just want to check if anyone have tested this in PiPo M6 Pro. Music player doesn't pause when removing headset. Sound just divert to the built in speaker. Using RR 1.5.1

[Pipo2000]

Eum...that seems a normal behaviour. No ?

[superbit64]

guys, any of you have a guide on how to open this tablet? I think my other speaker has a wire loose and I need to check it out.

[leboeff]

Hi all,

I think I have found the problem.

I think it´s the Nand erase.
It counts just a few numbers, like 155 ->275 ->546-> 789 and so on.
I got that wrong in the manual.
my english is not so good. So I´am so sorry for the trouble.


Sometimes i came in the android system, but the NAND memory is unmount.


I then wanted the NAND format up in android. But it dont work.
On the second boot it hangs agian.


But what schould I do?

I tested it on 3PC´s. 2 times with windows 7, and one pc with xp.
Also, I tested it with two different cables.
Always the same Problem with the counts of the numbers.

[claro966]

R: Pipo M6 Pro RileyROM 1.5

Very strange, be sure that Debug USB control is unchecked on the tablet before flashing and that the cable connection is stable. Don't move it during the flash/erase time.


Inviato dal mio M6pro utilizzando Tapatalk

[rrileypm]

Be sure you are using only the USB cable supplied with the tablet.

The Pipo cable has a longer micro USB plug in order to reach far enough into the tablet to make a good connection. Other USB plugs don't connect well. In my experience using different cables, the first sign of a connection problem is with trying to erase IDB.

On first boot, if you are using stock recovery, the NAND will automatically be formatted. In my later ROM's, I'm running stock recovery on first boot...then CWM recovery is installed after the first boot...but you have to wait long enough before turning the tablet off to let this happen.

[rayyden]

Hi all, is there any way to change resolution with this rom like with stock rom?

Inviato dal mio M6pro utilizzando Tapatalk

[dmr]

Hi all, is there any way to change resolution with this rom like with stock rom?

Inviato dal mio M6pro utilizzando Tapatalk

no, in stock (1.1.2) only one resolution, you can flash 1.4.2 (riley's) or 1.1.0 (stock) - last with normal mode

[Billcnz]

Just got my m6pro today, it didn't have the latest firmware and wasn't very smooth on scrolling so updated with this one it's all going great so far, thanks.

Sent from my M6pro using Tapatalk 4

[Billcnz]

Hi, I just want to check if anyone have tested this in PiPo M6 Pro. Music player doesn't pause when removing headset. Sound just divert to the built in speaker. Using RR 1.5.1

Some tablets support that feature of pausing on removal of headset but it has to be supported in the audio hardware and firmware and seems not currently on m6pro

Sent from my M6pro using Tapatalk 4