Help Identifying t-r42 device

[endera]

I also got the rk3188_box_szy_x6.

I tried several custom firmwares, but without success.

Now i think i have stock again. soundcloud app doesnt work properly... also i have problems with xbmc.


So is there a working firmware finally? A version of lewy´s maybe?

fw LİNK ??

[Frant]

New stock firmware for

I'd also be interested in the link, but would like the LAN to work

The saller gave me new stock firmware.

http://4pda.ru/pages/go/?u=http%3A%2F%2Fyadi.sk%2Fd%2FDqKXCtNVFhLV5

Also, you can try the new universal Wasser firmware 1.2.4.

http://www.freak-tab.de/wasser/firmware-wasser-1.2.4.zip

I can't try this firmwares. Anybody, please, check this firmware on board and write about its.

[endera]

The saller gave me new stock firmware.

http://4pda.ru/pages/go/?u=http%3A%2F%2Fyadi.sk%2Fd%2FDqKXCtNVFhLV5

Also, you can try the new universal Wasser firmware 1.2.4.

http://www.freak-tab.de/wasser/firmware-wasser-1.2.4.zip

I can't try this firmwares. Anybody, please, check this firmware on board and write about its.

BT does not work with WiFi does not Work (firmware-wasser-1.2.4.zip)

[sta1ny]

fw LİNK ??

i am using the stock firmware from Frant´s link.

maybe i can test the wasser firmwares today.

[endera]

The saller gave me new stock firmware.

http://4pda.ru/pages/go/?u=http%3A%2F%2Fyadi.sk%2Fd%2FDqKXCtNVFhLV5

wifi and bluetooth does not work...

Also, you can try the new universal Wasser firmware 1.2.4.

http://www.freak-tab.de/wasser/firmware-wasser-1.2.4.zip

wifi and bluetooth does not work.

I can't try this firmwares. Anybody, please, check this firmware on board and write about its.

wifi and bluetooth does not work...

[Frant]

wifi and bluetooth does not work...

In CS819 firmware or wasser 1.2.4?

Thank you for trying.

[endera]

In CS819 firmware or wasser 1.2.4?

Thank you for trying.

both...

running FW

cxy_cs918_bt_box_ap6210_131120_rooted.img (wifi worked bluetootj worked)

[Frant]

both...

running FW

cxy_cs918_bt_box_ap6210_131120_rooted.img (wifi worked bluetootj worked)

Thank you, this is not good news, will see more...

[sta1ny]

tested T-R42 2.0 Board FW. Box doesnt boot...

[sta1ny]

tested k-r42-old_revision-wasser-1.2.4. no wifi

[endera]

Thank you, this is not good news, will see more...

help me frant...

https://dl.dropboxusercontent.com/u/23677706/foto%C4%9Fraf.JPG

https://dl.dropboxusercontent.com/u/23677706/IMG_3216.MOV

[Frant]

help me frant...

https://dl.dropboxusercontent.com/u/23677706/foto%C4%9Fraf.JPG

https://dl.dropboxusercontent.com/u/...6/IMG_3216.MOV

I understand, what you can not load firmware, isn't it?

In your photo i see, what point 1 hasn't any color, i think device not connected to system in preloader mode. Before loading firmware, point 1 must be green.
In movie I see, what device not loaded, may be incorrect or failed load firmware.

This device can powered from USB-OTG. For first step, you must disconnect power supply and USB-OTG from PC. Than, put reset button on box, than, connect USB to PC. In sytem must appear PreloaderMTK device (in Device Manager). You can apply power supply or not, try that and that. In RKBatchTool must be green in 1 point. Then trying load stock firmware via Restore button.

If you get error, try RKDevelopTool_v1.37 to clear flash, whitch included in Wasser 1.2.4 firmware pack. Than, repeate all one more time.

Tell me more, what happiens with your box, in this moment I can't tell anymore...

[endera]

I understand, what you can not load firmware, isn't it?

In your photo i see, what point 1 hasn't any color, i think device not connected to system in preloader mode. Before loading firmware, point 1 must be green.
In movie I see, what device not loaded, may be incorrect or failed load firmware.

This device can powered from USB-OTG. For first step, you must disconnect power supply and USB-OTG from PC. Than, put reset button on box, than, connect USB to PC. In sytem must appear PreloaderMTK device (in Device Manager). You can apply power supply or not, try that and that. In RKBatchTool must be green in 1 point. Then trying load stock firmware via Restore button.

If you get error, try RKDevelopTool_v1.37 to clear flash, whitch included in Wasser 1.2.4 firmware pack. Than, repeate all one more time.

Tell me more, what happiens with your box, in this moment I can't tell anymore...

Thank you.
point 1 must be green.5 seconds...
but the device is shutting the power down after 5 seconds.

[Frant]

Thank you.
point 1 must be green.5 seconds...
but the device is shutting the power down after 5 seconds.

In movie i doesn't see a connected power supply. May be not enough power for device. While device is on, set power supply to it.

[endera]

In movie i doesn't see a connected power supply. May be not enough power for device. While device is on, set power supply to it.

5v power supply with both the PCB usb
After both 5sec power off...