Blacklist of locked Down Version´s of RK3188 CPU

[JDfense]

Ray, I think I have tested your ROM, but I have to check at home later. Maybe I miss the one and only. :-)

JDfense --->I8160

[Max One]

@ JDfense

Did u tried it with bootloader 2.13? I think they work at both JB and KK. I use it on KK atm.

I can flash this bootloader to test on my 1st JB tv-stick. Better to brick mine than urs.

[JDfense]

No, I did never tried a bootloader 2.13.
Hm. Good idea, better yours, because no one should be forced to buy a second Model T.;-)

JDfense --->I8160

[Max One]

Ok. Im gonna try it now. And yeah T chips are maybe bad but not that bad

Ich mach mal das Versuchskaninchen

[Max One]

RK3188Loader-L-_V2.13.bin works with JB and KK.

http://www.file-upload.net/download-8727424/RK3188Loader-L-_V2.13.bin.html

All the devs should use this multiLoader in future = less bricked devices



If u wanna know where i got it from?

From this site http://www.rikomagic.com/en/download/download_28_1.html

Exctracted it from this Firmware RKM MK902 Software(140308)

http://www.sendspace.com/pro/dl/q8du4h

Its a 4.2.2 JB Firmware

[JDfense]

OK. Das war mutig. :-)

Good to know. I will try it later.

JDfense --->I8160

[kandilak]

Ok. I need a few guinea pigs to help me.

I've downloaded the Jelly bean sources, added RK3188T detection and compiled. However, I can't test

So, can a few of you test this kernel for me?

You will need a Jelly Bean ROM installed.

1. Flash my kernel
2. Tell me if it boots
3. If succesful so far, post me your DMESG

I test this on my ΜΚ908ii with Finless 1.5a but not boot

[JDfense]

Have you try it with my MK809III 2.1 Rom ?
This have a 1.xx Loader that Works with T Cpu also.

Ray

Gesendet von meinem GT-I9305 mit Tapatalk 2

Okay, I've tested your ROM. The included boatloader 1.24 is like poison for my cs968 - hard bricked my device, but I'm lucky back, finally it jumps back to loader mode, after I tried all tricks I know.
So all cs968 user, stay away from the 1.24 bootloader.
After that I flashed your ROM successfully with the 2.13 booloader, thx max one, this 2.13 bootloader seems to be the universal flashing soldier. As a result the flashing was complete without error, but the ROM does not boot, it seems like I have no power supply, no kernel logo or any flickering for trying to start. This ROM can't start my device. Then I changed the kernel to stock, but no choice. It does not boot.

Thanks Ray, but the cs968 seems be a very special device.

JDfense

PS.: Time for the d33 JB kernel.

[JDfense]

Ok. I need a few guinea pigs to help me.

I've downloaded the Jelly bean sources, added RK3188T detection and compiled. However, I can't test

So, can a few of you test this kernel for me?

You will need a Jelly Bean ROM installed.

1. Flash my kernel
2. Tell me if it boots
3. If succesful so far, post me your DMESG

I've tested your kernel with MBox(another cs968 clone) 720p stock rom, but no choice. It boots for a second, then it bootloops and boots again.

JDfense

[tinyhands]

Ok. I need a few guinea pigs to help me.

I've downloaded the Jelly bean sources, added RK3188T detection and compiled. However, I can't test

So, can a few of you test this kernel for me?

You will need a Jelly Bean ROM installed.

1. Flash my kernel
2. Tell me if it boots
3. If succesful so far, post me your DMESG

No joy with either loader 1.20 or 1.24 on my mk908ii as well. If I flash the Finless 1.5a boot, misc, recovery, and system with your kernel I see "formatting" messages at startup, but then the screen starts blinking and finally alternates between between black & no signal.

Loader 2.13 boots into recovery but I can't get past recovery and the screen is blinking.

[d33]

Thanks for testing - I'll work on it. I've removed the download

[kandilak]

Thanks for testing - I'll work on it. I've removed the download

Any progress on JB's kernels development d33?

[d33]

Any progress on JB's kernels development d33?

Nah, Gave up. Just got an AMLogic quad core Tablet to play with and still working to get a KK kernel for Cube U30GT2

[mikele]

Any new for final KK ? I saw somewhere this is done...

[jimbo68]

Here is a Little Program to check if the CPU is a T Model or not.
Please Test it.
Thx.

Neomode


Removed app not Work as Should, make a new one.

Has a new one been made.

I tried this one and it said I seemed to have a real RK3188, however, the chip itself has RK3188-T on it.


EDIT: scrap that

NEOMode's app doesn't work. I have his source code and I'll fix it but:

1. I have a ridiculously long list of things people would like already
2. Bob needs my support which comes first
3. The hotel I'm staying in this week blocks the HDMI ports so I can't work on my hobby in the evenings

Sorry all