Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Q7 Rk3188 Device - What Works & Help Please?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by tarantoga View Post
    With proper wifi/bt drivers it's going to be sufficient for me at least for now. Some nice custom rom would be great though.
    Ok, rather use this version then

    Comment


      #17
      Originally posted by hackadroid View Post
      Ok, rather use this version then

      http://pan.baidu.com/s/1ntsdJkP
      Thanks! The difference between these two versions is bluetooth support, correct?

      Comment


        #18
        Originally posted by tarantoga View Post
        Thanks! The difference between these two versions is bluetooth support, correct?
        No, Bluetooth, Wifi and Lan all work but the first one I suggested takes a long time to boot

        2nd link is much faster

        Comment


          #19
          So, I actually have a dump of my box and have dug through it. The whole rom would work great but it needs that patch for the VSync. I am trying to get enough time to build a custom kernel but I am still learning how to incorporate drivers from image dumps. Until now I have only done builds with board configs already built. If anyone out there has some input, I could try and crank this out in the next week or so.

          Comment


            #20
            Originally posted by wazzuperz123 View Post
            So, I actually have a dump of my box and have dug through it. The whole rom would work great but it needs that patch for the VSync. I am trying to get enough time to build a custom kernel but I am still learning how to incorporate drivers from image dumps. Until now I have only done builds with board configs already built. If anyone out there has some input, I could try and crank this out in the next week or so.
            AFAIK, if you have separate image files for partitions, the system.img file (being a dump from partition /dev/mtd8) can be mounted as ext3 filesystem. Not sure about others. IIRC Linux drivers are *.ko files. I hope this helps.

            Comment


              #21
              Q7 Stock Firmware

              Geekbuying just posted the Q7 Stock Firmware, Everything works for me.

              Comment


                #22
                Originally posted by wazzuperz123 View Post
                I have a device that looks like the image below and seems to have a lot of similarities as other devices : I will update this post with exact chipset info as I have it in another location. I wanted to contribute as after a LOT of digging and trying things, this forum has by far helped me the most!

                CHIPS INSIDE

                WLAN: RTL8188
                LAN: RTL8201F
                Bluetooth: Mediatek MT6622

                Back of Device / Board Print all specify the "Q7" or "XT-Q7-V10". I have dug into these forums trying to match any print from the board or model and have found nothing so far.

                Getting Perfect Playback on 1080p & 720p MKV :

                Full Flash - K-R42 Hybrid Firmware (HFW) 3.2 by lewy20041 Firmware

                Flash Kernel Only From - K-R42 firmware by wasser 1.2.3

                As far as I can tell the 1.2.3 kernel from wasser has the stutter video fix - 1.2.4 does not

                With these wifi / bluetooth / Blue Button do not work but USB / Wired Do


                ----------------

                I have also dumped the original firmware from the box including kernel, which if flashed has all the drivers to make everything work, however, I loose the video stutter fix. I tried the patch the kernel with the rkpatchomatic which gave no errors and was successful. When flashed it did not boot though. I tried a couple times to make sure and had the same result every time.

                I was wondering if someone here could possibly patch the kernel or build a kernel with the patch if all chipsets were specified.

                Thanks again for all the contributions from everyone who has helped me get my device working so good already!

                helo wazzuperz123

                I have the same q7 your


                attempt to change the recovery but I can not.


                get your change?
                you completely worked wasser 124 rom?
                thanks

                Comment


                  #23
                  wasser lewi or any rom has worked for me.


                  I only got that ripped the rom minimeox7 but does not work or wifi or bluetooth


                  the original rom decompile, change the recovery and returned to compile, will not start


                  anyone knows how to put a recovery this official rom

                  Comment


                    #24
                    Hey Miss, you have to restore with the original firmware above. Everything should work except xbmc will have a lag. I used the rkpatchomatic tool to patch the kernel and remove the frame skip. It will have to be unpacked though to get to the kernel. You can use RKtools to get at it. I am away from the location now. I'll try and upload it once have access.

                    Oh, you can flash that image with the tool in lewi's rom i believe. just select your downloaded image instead of his. I think wasser has the individual flash tool to flash individual partitions like kernel only or system only. Like I said though, you will have to unpack the image above with rktools to see the separate files.

                    Comment


                      #25
                      Originally posted by wazzuperz123 View Post
                      Hey Miss, you have to restore with the original firmware above. Everything should work except xbmc will have a lag. I used the rkpatchomatic tool to patch the kernel and remove the frame skip. It will have to be unpacked though to get to the kernel. You can use RKtools to get at it. I am away from the location now. I'll try and upload it once have access.

                      Oh, you can flash that image with the tool in lewi's rom i believe. just select your downloaded image instead of his. I think wasser has the individual flash tool to flash individual partitions like kernel only or system only. Like I said though, you will have to unpack the image above with rktools to see the separate files.
                      thanks try several systems, but not work.
                      I think I'll wait that you upload rom, thank you very much

                      Comment


                        #26
                        Originally posted by wazzuperz123 View Post
                        Hey Miss, you have to restore with the original firmware above. Everything should work except xbmc will have a lag. I used the rkpatchomatic tool to patch the kernel and remove the frame skip. It will have to be unpacked though to get to the kernel. You can use RKtools to get at it. I am away from the location now. I'll try and upload it once have access.

                        Oh, you can flash that image with the tool in lewi's rom i believe. just select your downloaded image instead of his. I think wasser has the individual flash tool to flash individual partitions like kernel only or system only. Like I said though, you will have to unpack the image above with rktools to see the separate files.
                        hi can you please give us a step by step instructions to remove the video lag i think i have the same box thanks a million !

                        Comment


                          #27
                          Get a new firmware for Q7 TV BOX, will upload and share with you guys.

                          and try the beyond xbmc on Q7, it is the best xbmc version we have tested.
                          Looking for developers
                          http://freaktab.com/forum/advertiser...91j-smartphone

                          Comment


                            #28
                            Originally posted by geekbuying View Post
                            Get a new firmware for Q7 TV BOX, will upload and share with you guys.

                            and try the beyond xbmc on Q7, it is the best xbmc version we have tested.
                            thank you pls upload asap !

                            Comment


                              #29
                              Geekbuying

                              Please also get EKB311B, TV Box RK3188 with Mediatek 7601U wifi firmware for us.

                              Comment


                                #30
                                FOR Q7 tv box, new firmware is here:



                                it's built in a XBMC version,however,i test it, no good as beyond xbmc. still recommend to use Beyond xbmc on this q7 tv box.
                                Looking for developers
                                http://freaktab.com/forum/advertiser...91j-smartphone

                                Comment

                                Working...
                                X