HPH Android TV BOX RK3288

[bloatman]

heatsink

I dont see a heatsink in the pictures. How does this unit cool the cpu?

Sent from my SGH-I747M using Tapatalk 2

Picture with heat sink, it was removed for the photos

Wi-Fi module ap6335

[taki]

Picture with heat sink, it was removed for the photos

Wi-Fi module ap6335

has mini pci slot but not soldered board

solder this

http://mobilitymagazin.de/wp-content/uploads/2010/01/nc10-pcie-02.jpg

http://mobilitymagazin.de/wp-content/uploads/2010/01/nc10-pcie-01-600x357.jpg

if it true thats amazingly.
we connect mini pci card (maka prepare driver for)

[taki]

Picture with heat sink, it was removed for the photos

Wi-Fi module ap6335

has mini pci slot but not soldered board

solder this

http://mobilitymagazin.de/wp-content/uploads/2010/01/nc10-pcie-02.jpg

http://mobilitymagazin.de/wp-content/uploads/2010/01/nc10-pcie-01-600x357.jpg

[curmudgeon]

Does it have real time clock (RTC)?

Picture with heat sink, it was removed for the photos

Wi-Fi module ap6335

The tall device on left edge of PCB looks like a Li battery for RTC. Is it?

[HPH___Tina]

The tall device on left edge of PCB looks like a Li battery for RTC. Is it?

Yes, it is

[HPH___Tina]

Would be a super hot seller, if it was dual boot, android and ubuntu.

Hey
Thank for your suggestions!
we are doing a dev board of Ubantu version,the brand is "firefly"

thank you!

[rceccleston]

Re: HPH Android TV BOX of RK3288 64gb 4gb ram $200

Hey
Thank for your suggestions!
we are doing a dev board of Ubantu version,the brand is "firefly"

thank you!

Hi Tina,

Is this your FireFly board for Ubuntu?

http://www.cnx-software.com/2014/07/25/firefly-rk3288-development-board-to-support-android-and-lubuntu/

Specifications for Firefly-RK3288 board:

SoC – Rockchip 3288 quad core ARM Cortex A17 up to 1.8 GHz with Mali-T764 GPU supporting OpenGL******ES******1.1/2.0******/3.0,******and******OpenCL******1.1System
Memory – 2G DDR3
Storage – 8GB eMMC flash + micro SD slot
Video - I/O HDMI 2.0 up to 3840×2160@60pVGA out (D-SUB connector)VGA in is available via the expansion headers.
LCD, MIPI and LVDS
Audio Output / Input – HDMI, optical S/PDIF, microphone header, and built-in MIC
Connectivity – Gigabit Ethernet, dual band 802.11 b/g/n Wi-Fi with external antenna, and Bluetooth 4.0
USB – 2x USB 2.0 host ports, 1x micro USB OTG
Expansion Headers – 2x 38-pin headers with access to SPI, UART,******EDP,******ADC,******GPIO,******I2C, VGA=IN, LVDS, MIPI, 3.3V,******5V, and GND signals.
Power Supply – TBCDimensions – 118 x 83 mm

A compact cased version, similar to your Android box, would be a hot seller within the Ubuntu community.


Sent from my M6 using Tapatalk

[Finless]

Stock Firmware please

Tina, I got the box Friday!

I already started messing with it and dumped the firmware inside. But there are differences from 3188. Some new partitions (uboot, resource, etc). No problem I got them all dumped and can make a ROM from hand but I would also prefer the stock firmware and RK tools please.

So do you have a download link fro the stock firmware> I do not see it on your website in downloads.

Thanks,
Bob

[odrewjr]

Bob, I received an email from Tina this morning and she stated the new firmware should be ready by Aug. 25th.

[HPH___Tina]

Tina, I got the box Friday!

I already started messing with it and dumped the firmware inside. But there are differences from 3188. Some new partitions (uboot, resource, etc). No problem I got them all dumped and can make a ROM from hand but I would also prefer the stock firmware and RK tools please.

So do you have a download link fro the stock firmware> I do not see it on your website in downloads.

Thanks,
Bob

Hi bob,
The stock firmware will upload to the website for you at Monday，thank you!

[HPH___Tina]

Hi Tina,

Is this your FireFly board for Ubuntu?

http://www.cnx-software.com/2014/07/25/firefly-rk3288-development-board-to-support-android-and-lubuntu/

Specifications for Firefly-RK3288 board:

SoC – Rockchip 3288 quad core ARM Cortex A17 up to 1.8 GHz with Mali-T764 GPU supporting OpenGL******ES******1.1/2.0******/3.0,******and******OpenCL******1.1System
Memory – 2G DDR3
Storage – 8GB eMMC flash + micro SD slot
Video - I/O HDMI 2.0 up to 3840×2160@60pVGA out (D-SUB connector)VGA in is available via the expansion headers.
LCD, MIPI and LVDS
Audio Output / Input – HDMI, optical S/PDIF, microphone header, and built-in MIC
Connectivity – Gigabit Ethernet, dual band 802.11 b/g/n Wi-Fi with external antenna, and Bluetooth 4.0
USB – 2x USB 2.0 host ports, 1x micro USB OTG
Expansion Headers – 2x 38-pin headers with access to SPI, UART,******EDP,******ADC,******GPIO,******I2C, VGA=IN, LVDS, MIPI, 3.3V,******5V, and GND signals.
Power Supply – TBCDimensions – 118 x 83 mm

A compact cased version, similar to your Android box, would be a hot seller within the Ubuntu community.


Sent from my M6 using Tapatalk

hey,
yes,it is our dev board.

[taki]

has mini pci slot but not soldered board

solder this

http://mobilitymagazin.de/wp-content/uploads/2010/01/nc10-pcie-02.jpg

http://mobilitymagazin.de/wp-content...01-600x357.jpg

hi HPH___Tina
that is mini pci slot or sata connector

[Tech1]

HDMI Pass Through

HDMI IN/HDMI OUT, guys are we talking about HDMI pass through via the HPH Android TV box ...?

Example, from my Tivo Comcast/Xfinity cable card box via HDMI to my HPH Android TV box via HDMI cable to my AV receiver via HDMI cable out to my TV, now is this what we are talking about, when we say HDMI IN/HDMI OUT ...?

If yes, the HPH Android TV box is just what I have been waiting for a long time ... I have a Vizio Co-Star Google TV box that works this way, but it's outdated now as you know ...

[no_spam_for_me]

Tina, I got the box Friday!

I already started messing with it and dumped the firmware inside. But there are differences from 3188. Some new partitions (uboot, resource, etc). No problem I got them all dumped and can make a ROM from hand but I would also prefer the stock firmware and RK tools please.

So do you have a download link fro the stock firmware> I do not see it on your website in downloads.

Thanks,
Bob

Hi,

nice to read that you also get one (2/8GB?) ...

Two questions:
1. Is it a plastic case or aluminium?
2. I like the idea of the HDMI IN so I can release one port at the TV and place my SAT-Receiver at the HDMI IN, BUT I have to know, if the picture quality is the same at original output (e.g. SAT-Receiver) and "path trough" output (via HPH / RK3288)! Maybe you like to test it (of cause subjectively!)?

I also like the idea to have 32GB storage because of the at the moment missing possibility to map app's to external SD at this fu*** kk

@bloatman: I think I found for me an acceptable way to pay via prepaid virtual MasterCard

[Evildropbear]

^this

Please review the HDMI input function for us. Video if possible