UPDATE 10_27! - ug802 Android mini PC TV Player - Finless ROM 1.4a Custom ROM

[Shklifo]

Damaged microusb slot on the motherboard

I've soldered the micro usb. It started to work on wifi. Is not great but is there (fair). I will do the tests with wired later (sorry). Some automn tasks, my wife tells me, are more important. .

Hi Eugeni,

i got the same problem, the micro usb slot on the motherboard of UG802 broke off.

Can You tell how You solder it (to solder the 5 pins, for me, it is imposible ...)?
Maybe a photo too...

Thanks,
Shklifo

[froen0815]

look here -> http://www.freaktab.com/showthread.p...g-Cable-to-PCB

but be patient with the little Capacities where to solder the Data +/-

[manup85]

Hi all,

i have problem to install drivers with windows 8. when i choose "disk driver" system give me some list and i dont know which i have to choose. tnx for help.

edit: managed as guide to have mass storage but when i click reboot to flash mode, i received message: flash mode fail

[Shklifo]

Damaged microusb slot on the motherboard

look here -> http://www.freaktab.com/showthread.p...g-Cable-to-PCB

but be patient with the little Capacities where to solder the Data +/-

Thank You very much Froen0815.

I really appreciate it. I definetly will try it.

Again Thanks,
Shklifo

[froen0815]

It works, throw off the Micro-USB from my UG802 and soldered directly on the marked Points.
Soldered Shield to GND and did some Epoxid-Glue to secure the Wires ontop

[Banx]

What is max native resolution? On this rom...
I watch from MX Player and don t see diferences with UG802 and Mede8er500X2.
And how to check is native?

[chan]

how to install falsh player

hey guys i have problem after installing the 1.4 Rom my flash player dosent work how to download it i cannot watch live streaming so need help

[chan]

and wifi

and other thing is still i have the problem with wifi its on and off again

[eugeni]

broken micro usb

Hi Eugeni,

i got the same problem, the micro usb slot on the motherboard of UG802 broke off.

Can You tell how You solder it (to solder the 5 pins, for me, it is imposible ...)?
Maybe a photo too...

Thanks,
Shklifo

Shklifo,

I do not have time to make a photo now.
I resoldered the micro usb by using a fine soldering wire and a sharp soldering iron. I've soldered 2 or 3 points toghether, by error, but I removed the surplus (I did not panic ). I removed the surplus using a soldering iron with no solder on it.

I've noticed the modification using an usb cable, it is interesting one and it is easier to be done.
Good luck

[henry]

Boot problem Help

How to reset ,so i can flash firmware again
Opened it up and connected the 2 points to reset ,did not help,still in the finless custom 1.4 boot screen

[froen0815]

@Henry

as i read, you have to shorten the Pins and then you'll have to plug in the Device, so it'll start in Flash-Mode.

hope it works

[Lordbane]

PC flash - stuck

Hi,

I'm having a bit of a problem... I erased the NAND (went fine)
Pressed Flash ROM - it started copying the file - stopped in the middle (about 15m into the download)
I pressed erase again - failed.

I disconnected the usb cable, reconnected to the pc - it was detected.
I pressed erase - completed successfuly
I pressed Flash ROM - it started copying the file - stopped in the middle (about 30m into the donwload)

I was frustrated - tried to disconnect again, reconnect - this time:
It says "No Found RKAndroid rock usb"

The screen shows:
in4dealz.com logo, freaktab below and a fineless root ver... on the bottom right corner.

What can I do to recover?

Thank you,
Guy

[Lordbane]

Hi,

I'm having a bit of a problem... I erased the NAND (went fine)
Pressed Flash ROM - it started copying the file - stopped in the middle (about 15m into the download)
I pressed erase again - failed.

I disconnected the usb cable, reconnected to the pc - it was detected.
I pressed erase - completed successfuly
I pressed Flash ROM - it started copying the file - stopped in the middle (about 30m into the donwload)

I was frustrated - tried to disconnect again, reconnect - this time:
It says "No Found RKAndroid rock usb"

The screen shows:
in4dealz.com logo, freaktab below and a fineless root ver... on the bottom right corner.

What can I do to recover?

Thank you,
Guy

nm. used the same method as the boot loop - at least I got it to a good point again - trying to flash

edit: happy to say the flash completed successfully

[pirado18]

Fix video lag in 1080p

How can I fix the lag in videos? After I flashed the UG802 i got this issues. Can anyone give me a solution? Thanks.

[henry]

@Henry

as i read, you have to shorten the Pins and then you'll have to plug in the Device, so it'll start in Flash-Mode.

hope it works

Thanks for help ,
I tryed this several times ,but just for shore?
plug in the mini usb?
shorten the pins for how long?
Are there other way's too reset?
Still have in4dealz.com logo, freaktab below and a fineless root on the bottom right corner