[Pipo-Project] M7Pro kernel

[raxy]

my m7p is a daily driver with plug an play usb-audio set on top of RR KK rom,
so I 'd rather go back and forth (but not too many times) from my current setup to a functionaly complete enough test kernel I've built myself (from you code)

[stevejc]

Done

I built a kernel with Steve's DAT - so just for the record 1.23

X and Y axis must be swapped in your kernel

[herrjemineh]

1.23 seems to work for me as well... touch test with test apps, axis and reaction seem well

tablet seems to start faster, possible?

but:

3g totally no signal, quite important for me

wlan speed about half of "stock kernel" i'm using rr3.4.1

bluetooth, usb and gps not tested

[d33]

1.23 seems to work for me as well... touch test with test apps, axis and reaction seem well

tablet seems to start faster, possible?

but:

3g totally no signal, quite important for me

wlan speed about half of "stock kernel" i'm using rr3.4.1

bluetooth, usb and gps not tested

Can you provide DMESG from stock (3.4.1) and my 1.24 (uploading soon) for comparison and I'll see what I can do.

[raxy]

1.23 seems to work for me as well... touch test with test apps, axis and reaction seem well

tablet seems to start faster, possible?

but:

3g totally no signal, quite important for me

wlan speed about half of "stock kernel" i'm using rr3.4.1

bluetooth, usb and gps not tested

Suggestion:
Test v1.17 which rriley seems to have found with everything perfectly running OK...

[d33]

my m7p is a daily driver with plug an play usb-audio set on top of RR KK rom,
so I 'd rather go back and forth (but not too many times) from my current setup to a functionaly complete enough test kernel I've built myself (from you code)

Flashing a kernel takes 10 seconds and does not affect any user data. Flash it, test it and then flash back.

There's pretty much no point being a developer if you aren't going to develop :-D

[d33]

Suggestion:
Test v1.17 which rriley seems to have found with everything perfectly running OK...

The only difference from about 1.12 has been the config of the VTL driver so ALL of them are indistinguishable if you have Goodix.

I'm uploading 1.24 which will work for both Goodix and VTL and I'll work on the 3G driver.

[d33]

1.24 uploaded

Changelog:

VTL x,y swap deselected
OTG mode fixed

[stevejc]

1.24 uploaded

Changelog:

VTL x,y swap deselected
OTG mode fixed

So , not yet !

axis X is axis X : but need to be reversed
axis y is axis Y : but need to be reversed

My Config that's working for me

reverse X axis not checked
reverse Y axis checked
swap X/Y not checked

OTG is not working too

[d33]

I've turned on the generic modem functions -> v1.25

Changelog:

Added RK29 modem support
Added CDC-ACM support for USB modems

[herrjemineh]

Infortunately no dmesg possible, i get device error via ADB even when the driver is OK, dunno why

Gesendet von meinem M7pro mit Tapatalk

[stevejc]

Infortunately no, i get device error via ADB even when the driver is OK, dunno why

Gesendet von meinem M7pro mit Tapatalk

Try with this : adb_rktools.zip

[stevejc]

I've turned on the generic modem functions -> v1.25

Changelog:

Added RK29 modem support
Added CDC-ACM support for USB modems

Your link is not good but found it.

And it does boot loop

[herrjemineh]

I am Outside now, tested 3g via speedtest app, With stock rr3.4 kernel i get 0.9mbit/sec down and 2mbit/sec up... This is riddiculous.... I hope your custom kernel has More ability regarding 3g

Gesendet von meinem M7pro mit Tapatalk

[herrjemineh]

D33 AS soon as i get home i'm gonna test the New kernel

Gesendet von meinem M7pro mit Tapatalk