Cube T9 ROM/Tools/Mods, etc

[onslow2630]

Hello All

i brand new Cube T9 4G

PLEASE Help me try to opgrade but now i get the error in sp flash tool

Brom error : S_FT_ENABLE_DRAM_FAIL (4032)

(EMI) ENABLE DRAM FAILED

Can NOT turn it On now

i use the rom T9_V1.08_20150326 NoChinaApp


Regards

Onslow

[helgiman]

Download, unpack and flash this preloader with flashtool

[onslow2630]

Hello helgiman

can you please tell me how to use that file preloader_htt8752_tb_kk.bin in flash tool


regards

Onslow

[helgiman]

replace it with preloader in your firmware, in flashtool uncheck all except preloader and flash.

[ADB user]

4G LTE: What speed are you getting with a Cube T9 using 4g sim and compare it to Cube Talk 9X in locations using your 4g sim?
Anyone in Spain or around compared speed for both the tabs ?

[giouncino]

they are not comparable:

T9 has 4G support talk 9x is 3G only....

[onslow2630]

Hey helgiman
I have try but it's NOT working. I think that my cube is dead :-(
It jump On and OFF In Windows when ii conect it so sp flashtool cant see it

Regards

Onslow

[helgiman]

it is connected only for a few seconds
when you connect tablet, in Device Manager-Port(COM&LPT) you should see MTK USB port or Mediatek Preloader USB VCOM port for a few seconds
you must press "Download" in flashtool and then connect tablet to PC

[onslow2630]

Hello Helgiman

SUPER it.s working again Thanks you are so good Thanks

i have the rom T9_V1.08_20150326 NoChinaApp but only 2 gb from scatter file
can i put 6 gb scatter file in folder and delete the other 2 gb scatter file ?????


Regards

Onslow

[helgiman]

Download NVRAM_B&R.rar, unpack it, power on the tablet, enable "usb debugging" in developer option, connect tablet to pc
if in Device Manager unknown device "T9 Android Phone", install driver from \NVRAM_B&R\DriverWinAll\
in "usb computer connection" set "Media device (MTP), if pop up window "Allow usb debugging" set checkbox and press OK
run \NVRAM_B&R\backup.bat, then you`ll see nvram.bin in \NVRAM_B&R\, It`s your IMEI and MAC backup. if you lost your IMEI and MAC during flashing, you can restore it by the same way by using restore.bat instead backup.bat
Put 6 gb scatter file in firmware folder and choose it in flashtool, set "firmware upgrade" mode and flash.

[onslow2630]

Hi again my emei is gone cant phone and sms and when i press *#06# it says unknown and not at number


Regards

Onslow

[helgiman]

you already lost your IMEI? Are you flashing in format all+download mode?
Read this using google translate or anything else, i tired translating

[onslow2630]

Hello again Helgiman

Just wan't to tell you that site help me and all is working again on my cube
Thanks for the help you are the best
i wonder what rom you have on your cube if you have one

Regards

Onslow

[helgiman]

I use myself custom/port rom called "Cube T98v1.1". the next version I'll post here soon

[Fabien34]

Hello,

I hope it's the right place for ask this.

On last august, i ordered a cube t9. All was fine until now.
Last time, i used my tablet normally (it was about 80% charge), i turn off the tablet.
The day after, impossible to turn on tablette, i tryed to press during long time on "power on" button but without succes.
When i put tablet on charge, nothing show up, i don't have animation of batterie as usually.
I tryed to let tablet on charge all night but nothing help. I can't turn on the tablet.
I don't understand what happen, i just turn off the tablet and since i'm unable to turn it on.

Do you have idea of what could be the problem?
Some procedure for try to repair it?

Regards


----------------------------------------
Edit:

All is fine, finally. I had a bug when my tablet was turning off, i covered the screen with cover which put tablet in standby.
I guess that tablet didn't apreciate going on standby while it was turning off.
When batterie finally goes empty (4days later), it really turned off and i was able to put tablet on charge and turn it on.