[ROM] Unofficial OpenELEC for MK808B+ and MXQ

[krystyan]

Sorry I wanted to bring back images at a higher resolution, but without success
kamacnik1 - exactly in menu openelec setting i searched ...

[kamacnik1]

aha, ok
then it could be about original and clone stick
sorry about that

[kszaq]

jackmate, ecko404, krystyan, noosk sorry for the delay - I had some family stuff planned this weekend and couldn't make and test the build faster. Here's a test build for you with new NAND drivers and Realtek 8723AS+BS kernel modules: https://github.com/kszaq/OpenELEC.tv...es/tag/5.0.8p2

Please test and report, I hope it changes things for good!

[jackmate]

jackmate, ecko404, krystyan, noosk sorry for the delay - I had some family stuff planned this weekend and couldn't make and test the build faster. Here's a test build for you with new NAND drivers and Realtek 8723AS+BS kernel modules: https://github.com/kszaq/OpenELEC.tv...es/tag/5.0.8p2

Please test and report, I hope it changes things for good!

hi Kszaq,
just flashed it my my new beelik mxq and boot time is bit faster now ,around 1 minute I think is normal.
is it possible to have gotham 13.2 in the build instead of kodi helix ,the skin i use confluence custom mod doesnt work in kodi version and I get text on the left of opneleec config addon missing in ur KODi build like in this pic.

http://imgur.com/iCk4qp7

[mike77]

hi Kszaq,
just flashed it my my new beelik mxq and boot time is bit faster now ,around 1 minute I think is normal.
is it possible to have gotham 13.2 in the build instead of kodi helix ,the skin i use confluence custom mod doesnt work in kodi version and I get text on the left of opneleec config addon missing in ur KODi build like in this pic.
http://imgur.com/iCk4qp7

CCM Helix - download link:

https://github.com/Mudislander/skin.confluence.custom.mod/archive/master.zip

[krystyan]

How to do the new update or rewrite it as clean again openelec, it confused whenever I tried to return to android
Thanks

[jackmate]

CCM Helix - download link:

https://github.com/Mudislander/skin....ive/master.zip

I tried that too ,but it's not a upgrade of confluence custom mod and its a new install and I loose all my custom shortcuts In confluence custom mod .
All addon shows fine except openelec config text missing on left ,why ?

[ecko404]

jackmate, ecko404, krystyan, noosk sorry for the delay - I had some family stuff planned this weekend and couldn't make and test the build faster. Here's a test build for you with new NAND drivers and Realtek 8723AS+BS kernel modules: https://github.com/kszaq/OpenELEC.tv...es/tag/5.0.8p2

Please test and report, I hope it changes things for good!

Here is my observations (5.0.8-20150419) after a reboot:
Openelec loading screen for appx 45sec, black screen for a second, Openelec loading screen for appx 91sec, then Kodi load.

[kszaq]

Here is my observations:
Openelec loading screen for appx 45sec, black screen for a second, Openelec loading screen for appx 91sec, then Kodi load.

I understand that this is after having passed the update process? Can you please get me a dmesg?

I have prepared another test version with an old mmc driver (pre-20150115) that is used in Android firmware. Please report the version that you tested with your test results!

https://github.com/kszaq/OpenELEC.tv/releases/tag/5.0.8p3

[ecko404]

I understand that this is after having passed the update process? Can you please get me a dmesg?

I have prepared another test version with an old mmc driver (pre-20150115) that is used in Android firmware. Please report the version that you tested with your test results!
https://github.com/kszaq/OpenELEC.tv...es/tag/5.0.8p3

Yes it was after the update, I did a reboot.

I will try and let you know, thx for your work!

[jackmate]

I understand that this is after having passed the update process? Can you please get me a dmesg?

I have prepared another test version with an old mmc driver (pre-20150115) that is used in Android firmware. Please report the version that you tested with your test results!
https://github.com/kszaq/OpenELEC.tv...es/tag/5.0.8p3

kszaq This 2nd test build works well for me,kodi boots just in less than 30 seconds.is it possible to have Gotham 13.2 in this build instead of kodi 14 please.

[kszaq]

kszaq This 2nd test build works well for me,kodi boots just in less than 30 seconds.is it possible to have Gotham 13.2 in this build instead of kodi 14 please.

That would mean having to prepare OpenELEC 4.2.1 and it will take time as I've never worked on it before, it needs to be prepared (almost) from the scratch. You should also be aware that there is no support for HEVC in 13.2/4.2.1.

[MeleTest]

I understand that this is after having passed the update process? Can you please get me a dmesg?

I have prepared another test version with an old mmc driver (pre-20150115) that is used in Android firmware. Please report the version that you tested with your test results!
https://github.com/kszaq/OpenELEC.tv...es/tag/5.0.8p3

I have an issue with this prelease : No LAN (via ethernet) and WIFI can't be configured.
Otherwise, it boots pretty well

[kszaq]

I have an issue with this prelease : No LAN (via ethernet) and WIFI can't be configured.
Otherwise, it boots pretty well

Can you please check the previous one (5.0.8-20150419)?

[ecko404]

I understand that this is after having passed the update process? Can you please get me a dmesg?

I have prepared another test version with an old mmc driver (pre-20150115) that is used in Android firmware. Please report the version that you tested with your test results!
https://github.com/kszaq/OpenELEC.tv...es/tag/5.0.8p3

Here is my observations (5.0.8-20150420) after a reboot:
Openelec loading screen for less than 15sec, then Kodi load. Amazing!