CWM recovery for rk3066 devices.

[vijayar]

Thats not a problem, cause in recovey there is a kernel inside. Sorry but I forget the device you have, it is a mk808b "original", right ?

PD: I saw now that you have a mk808 without the "b", i have only copies of mk808b cwm.zip

I also have 808 and I think there is some issue with existing CWM that has been posted since I too had reported earlier that mouse was unresponsive. Can you contact fun is possible and highlight this issue ? Thanks in advance

[leolas]

I also have 808 and I think there is some issue with existing CWM that has been posted since I too had reported earlier that mouse was unresponsive. Can you contact fun is possible and highlight this issue ? Thanks in advance

In the first post i have links to the threads where fun make changues and receive feedback.
Don´t pm him so he usually will not answer pm.
Poisonwolf post in the xda thread, that is the correct way to feedback him. Now when he can he will answer PoisonWolf, and sometimes he ask for extra info about the problem. Try to explain your problem clear to him and append all details you can, maybe he ask you dmesg or another test.
Sorry but i cant help cause i don't have mk808 and i don't have this issue in my mk808b.

[liuchen2]

HI:leolas & bob
i have a question about my mk808,the device is flashed by bob's finless1.6 ROM and work well,then i install leolas's cwn-recovery(by update.zip method) and work well too.
now i want flash a new kernel,but in any case the devie can't enter flash mode,my computer(xp os)always prompt "No Found RKAndroid rock usb",i try many times but failure.
why?,thanks.

best regards!

[leolas]

Re: CWM recovery for rk3066 devices.

HI:leolas & bob
i have a question about my mk808,the device is flashed by bob's finless1.6 ROM and work well,then i install leolas's cwn-recovery(by update.zip method) and work well too.
now i want flash a new kernel,but in any case the devie can't enter flash mode,my computer(xp os)always prompt "No Found RKAndroid rock usb",i try many times but failure.
why?,thanks.

best regards!

First, it's not my cwm, it's fun_ the developer who brings this tool to us.

Now lets try to help with your problem:

Unplugg everything, push with a clip the reset button and while is pressed plug the usb wire to the stick at the OTG port.
Now your pc must recognize your stick in loader mode, so you can flash all you want.

[miron2]

Hi, my MK808B (MT5931) also can not enter in flash mode, always prompt "No Found RKAndroid rock usb", (I have uploaded bad software) if anyone can send CWM backup for MK808B (MT5931) I would be happy

[liuchen2]

First, it's not my cwm, it's fun_ the developer who brings this tool to us.

Now lets try to help with your problem:

Unplugg everything, push with a clip the reset button and while is pressed plug the usb wire to the stick at the OTG port.
Now your pc must recognize your stick in loader mode, so you can flash all you want.

I just according to this method,try another same type mk808 and replacement of using other computer,but can't enter flash mode,the TV show already enter CWM interface.

[PoisonWolf]

In the first post i have links to the threads where fun make changues and receive feedback.
Don´t pm him so he usually will not answer pm.
Poisonwolf post in the xda thread, that is the correct way to feedback him. Now when he can he will answer PoisonWolf, and sometimes he ask for extra info about the problem. Try to explain your problem clear to him and append all details you can, maybe he ask you dmesg or another test.
Sorry but i cant help cause i don't have mk808 and i don't have this issue in my mk808b.

Leolas, out of curiosity, is there another way to boot into recovery without using the reboot app? Maybe something is happening as the device is rebooting that's causing the mouse/keyboards to not be detected.

[leolas]

Re: CWM recovery for rk3066 devices.

Leolas, out of curiosity, is there another way to boot into recovery without using the reboot app? Maybe something is happening as the device is rebooting that's causing the mouse/keyboards to not be detected.

Yes you can enter in recovery mode pushing the reset button while you power on the device.

[leolas]

Re: CWM recovery for rk3066 devices.

I just according to this method,try another same type mk808 and replacement of using other computer,but can't enter flash mode,the TV show already enter CWM interface.

Pls, if you can, do that I say, unplugg everything, everything is all wires attached to your stick. HDMI wire, power usb wire, all
Now in the pc, open rkflashtool.
Plug a USB wire to the pc.
Now with a clip push the reset botton in the stick(it's in a hole at the opposite corner that the blue led) and maintain it pushed.
While reset button is pushed plug the USB wire to the OTG port.
The pc must sound. New hardware detected. Then you can release the reset button.
In rkflashtool you must see "rkdevice found in loader mode".
Flash the new kernel.
Hope this helps.

PD: The USB port at pc must be usb 2.0 and direct in the pc mainboard.

[miron2]

Pls, if you can, do that I say, unplugg everything, everything is all wires attached to your stick. HDMI wire, power usb wire, all
Now in the pc, open rkflashtool.
Plug a USB wire to the pc.
Now with a clip push the reset botton in the stick(it's in a hole at the opposite corner that the blue led) and maintain it pushed.
While reset button is pushed plug the USB wire to the OTG port.
The pc must sound. New hardware detected. Then you can release the reset button.
In rkflashtool you must see "rkdevice found in loader mode".
Flash the new kernel.
Hope this helps.

PD: The USB port at pc must be usb 2.0 and direct in the pc mainboard.

Leolas, too, so I have, after uploading the wrong firmware, in my MK808B (MT5931) flash button does not work, so I ask if there are other possibilities recovery, for example, CWM restore recovery, but you need a CWM backup maybe.

sorry for my english

[leolas]

Re: CWM recovery for rk3066 devices.

Leolas, too, so I have, after uploading the wrong firmware, in my MK808B (MT5931) flash button does not work, so I ask if there are other possibilities recovery, for example, CWM restore recovery, but you need a CWM backup maybe.

sorry for my english

If you dont have a cwm bakup made then you can't restore it I am working to make zips flashable by cwm. But not ready yet.

Do you try reboot to bootloader in the reboot apk in finless Rom?
Or type in terminal emulator:
su
reboot bootloader
Then you must enter in loader mode and you can flash using rkflashtool

[herby68]

hi friends

how to get cwm with a rooted MK808b running with finlessbob´s rom?

thx

Herby

[leolas]

Re: CWM recovery for rk3066 devices.

hi friends

how to get cwm with a rooted MK808b running with finlessbob´s rom?

thx

Herby

Finless Roms are like the stock Rom follow the steps in first post.

[herby68]

thanks done it

is it possible to upddate all roms from finless via cwm now?

cheers

Herby

[Craxx]

AW: CWM recovery for rk3066 devices.

At the moment NO.

best regards
Craxx :-)

Send from my Nexus 4 with Tapatalk 2 :-D