Hi top file in your post will not extract properly bottom file fine and IT WORKS looks to be all good. Will give more details in the morning. Thank you for your help
-
-
Hi a more detailed report as follows using file dated 20160726 file loads into box and ethernet connects with no problem. I can download and install normally but when opening any stream it plays but superimposed over the top of the image being played is 6 small images of the previous screen that showed the available streams. Only the power off button on the remote works. Wireless mouse works.
The other file you posted is not working it will not extract properly the extraction process fills up an 8GB card if left or it aborts with a fault message.The audio plays and from what I can see it appears to be in sync with the picture. If you or anyone else can point to instructions I will try to dump the log file and post. Once again many thanks for your time and assistance.Comment
-
I collected the script s905_autoscript for use with the new version of the image 7.0.2.006 from kszaq for USB flash drives (universal version of the script for SD cards and USB flash drives will come later) . Pay attention that this link (the image + the script) is only works on USB flash drives. How to use :
1. download the image the link from the topic kszaq
2. to burn the image to a USB flash drive
3. download and burn to USB flash drive the script s905_autoscript
4. to connect a USB flash drive to the TV box and turn on.
After the first start, the system automatically expands the second partition to the entire drive and reboot. When you first start the system in the list of available interface languages may be only one English. To use other languages, you need to go to Settings - Add-ons - Install from repository Kodi Add-ons repository and wait for the update the list of available Addons (anything to install is not required). Then, in the list of available languages should appear with all possible options and you can configure the language.
Checked in this version load, idle load is around 10% with alternating nuclei.
Tested on Telos models and Pro
Altstart
Try this version, it is possible to correct these mistakes.Comment
-
Hi I have had other things that had to be done today but will attempt to do this tomorrow. just one thing . Are you telling me that I need only place the downloaded files on the USB drive without extracting them and them boot the box with USB inserted. Thank you againComment
-
Balbes150, kszaq's instructions require the download of his img.gz file for 7.0.2.006 and replacing the extracted dtb.img with a box specific dtb.img. Does your s905_autoscript require a box specific dtb.img as well, or does your s905_autoscript retrieve dtb.img from the box? I'm running your meta version on an MXQ Pro+ and your OE 6.95.3.- Download img.gz file and burn it to SD card/USB drive: http://wiki.libreelec.tv/index.php?title=Installation
- S905: Download a device tree for your box from http://kszaq.libreelec.tv/s905/7.0.2.006/device_trees/, rename it to dtb.img and copy it to main folder of SD card/USB drive - replace the one that's already there.
I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party.
Ron WhiteComment
-
Need to download the image, unzip, burn it to a USB flash drive, download the script s905_autoscript and write it into the flash drive (in addition to those files that will appear there after you record on it image). Pay attention any more which is download and write is NOT REQUIRED. No need to change the dtb file. As far as I understood and tested in their own TV consoles, Telos and Pro available dtb file contains everything needed for these models. Pay attention to multi-boot activation should be performed according to the methods described in THIS thread. Script s905_autoscript is designed specifically for this system multi-download.Originally posted by Altstart View Post
ps Sorry, I forgot that You do not Tronsmart. Most likely, You need to try the instructions with the replacement of the dtb file.Comment
-
Try in the beginning to run LE without replacing the dtb file. If it doesn't work, try to replace the dtb file according to the instructions KSZAQ. I have no MXQ, so I can't check how it works on this model.Originally posted by Doggyofone View PostComment
-
Not something terrible, you can ask Trebor to move these messages to the right topic.
Comment
-
Assembled version of the image on the basis of recent changes in git kszaq. Tested and works with SD card and USB flash drive.
Working tested on Telos and Pro models. Please check on Meta.Last edited by balbes150; 24 August 2016, 17:47.Comment
-
Any plan for internal memory soonOriginally posted by balbes150 View PostAssembled version of the image on the basis of recent changes in git kszaq. Tested and works with SD card and USB flash drive.
Working tested on Telos and Pro models. Please check on Meta.Comment
-
https://libreelec.tv/2016/08/usb-sd-creator/
LibreELEC USB-SD Creator!
BY CHEWITT · AUGUST 20, 2016
An easy to use application to create bootable USB and SD card installation media has been on the staff wish-list for a long long time, so we are delighted to reveal the official “LibreELEC USB-SD Creator” app for Linux, macOS and Windows.
The app has four clearly marked steps to guide you through downloading the latest official LibreELEC image for your hardware and writing it to removable media, and checking “show all” enables selection of previous releases and current Alpha/Beta preview builds. You can also load a local image file, allowing the app to be used with previously downloaded images, or development and community created images that are not hosted on our official download servers.
Windows
The Windows version is compiled 32-bit and should run on Windows XP and newer. The macOS app is 64-bit and should run on 10.9 (Mavericks) and newer. The Linux app is available in 32-bit and 64-bit versions and should run on Ubuntu 14.04 and newer, and other Debian derivatives. The app checks for updates when started and displays a pop-up message if a newer version is available.
Comment
-
Version for the internal memory after testing. For the release of this version, I need to see the user feedback on a normal working version of the external media.Originally posted by e123enitan View PostComment
-
What I have is an MXQ Pro+ running sd-robots firmware for Android and your Telos Meta OE 6.95.3 from July 8 on the sd card. Its probably best that I pull the dtb from sd-robots and put that on the sd card with 7.0.2.006. The dtb that is part of 7.0.2.006 is very unlikely to be the same as what I have I think.Originally posted by balbes150 View PostI believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party.
Ron WhiteComment
-
Hello balbes150, I have tested this LE version on the S95 Meta.Originally posted by balbes150 View Post
Tested WiFi, BT, LAN and basic function. In the shutdown menu, "Reboot from NAND" rebooted to LE. Maybe I misunderstand that option.
Everything else just worked, outstanding. Let me know if you want me to test something specific.
Thanks for your work on this.
Also thanks to kszaq.
Comment
-
You can check these optionsOriginally posted by Doggyofone View Post
1. to try to run LE without replacing the dtb file (use the one that is in the image)
2. if the system does not work, replace the dtb file to the one that is in the current firmware of
3. if it doesn't work with dtb file from the firmware, in turn, try all files in this directory
4. if none of the options does not work, then we need to collect personal dtb file from source
Comment
Comment