HPH RK3288 Lollipop ROM v1.6 By Mo123

[mo123]

Hi Mo!
Thanks for your great work, Is there any news about marshmallow rom?

No, a Nougat ROM.
But only in a month or two.

[mo123]

Will the new rom work on a smartron R28?

Don't know, never heard of that device.
Get the stock firmware first so you have a backup if it is not working.
Maybe your device is similar to Tronsmart R3288 ones?

[[email protected]]

Dears

Im a new user , i install last 1.11 rom in my nagrace hph v6

All things seems perfect the most issue sovled to is the force sound usb routing to mele pro 10 remote, now the sound ok working direct from HDMI very good , thanks so much mo123 efforts

I want to ask some points
1st. when i install the laslast rom 1.11 is this all correction problems in previous roms 1.1 , 1.2.1.3, .... 1.9 , 1.10 are included ? Please answer me

2nd thing after i install the rom v1.11 , i check the rom name in section About device
It shown as HPH-NT-V6 Lollipop v1.10 !!!!

I think its an issue of un updating the last rom 1.11 name are somebody agreed with me

There is a small issue, every time i switch on the device, "nno location access" window appears! !!!, i need every time to close it, please help me how to disable its appearance again, in advnce thanks for support

[mo123]

Latest ROM contain changes from all previous ROM's or more than 90% of it depending if I removed or replaced something again.
I think it still shows v1.10, but if you download v1.11 it is definitely the latest one, sometimes I forget to change it or it will take too long to change as you need to rebuild the whole ROM instead of just adding small changes.

To disable the location popup on start, you need to say yes or accept it then after next boot it won't show again.
It is something to do with Google apps and if you cancel it, it will show again after the next boot.
Since tv boxes don't have GPS it is save to enable it and it can't get your location.
I will try to see if there is a way to disable it completely.

[[email protected]]

Latest ROM contain changes from all previous ROM's or more than 90% of it depending if I removed or replaced something again.
I think it still shows v1.10, but if you download v1.11 it is definitely the latest one, sometimes I forget to change it or it will take too long to change as you need to rebuild the whole ROM instead of just adding small changes.

To disable the location popup on start, you need to say yes or accept it then after next boot it won't show again.
It is something to do with Google apps and if you cancel it, it will show again after the next boot.
Since tv boxes don't have GPS it is save to enable it and it can't get your location.
I will try to see if there is a way to disable it completely.

Thanks so much mo123 for your clarifications & answer
Regarding to the location popup its ok, i will do as you say
Indeed, disabling GPS completely its very good idea such disabling a battery and its related options before was good


My greetings and respect, Hani

[mo123]

I'm working on porting some 4K fixes to the new ROM.
Hope it can improve compatibility for users with 4K tv's.
Is there still some black screen for certain 4K tv's when using 4K resolution?
Any other bugs, can let me know.

[sviet2k]

Hi,

Thanks mo123 for this wonderful rom.
I installed it on my Tronsmart. Everything is working perfectly but only the Power off does not work. The Power off reboot my box instead of turn off.
Same thing happens when I used Quick Boot Pro app.
Any workaround to power off correctly the Tronsmart box ?

Thanks in advance for your help.

[mo123]

HPH RK3288 v1.12 ROM
Changelog:

Superspeed ROM
lcdc:fix boot color not same
devices:close radical_update
devices:fix init
driver:fix queue file
dts: modify Voltage value for sdcard
stagefright Fix HEVC in MKV for most clips
rga2 correct BGRA stride
rockchip: hdmi: fix LS49AL88A92 4K mode
rockchip: hdmi: fix parse 1st block edid
lvds/rgb: fix rgb output when have no lvds_format
IEP: re-caculate the uv address when 4k video input in iommu enable case
hdmi: v2: phy support clk 59.4MHz
hdmiv1: fix no sound/noise problem
hdmi: fix HDMI CTS HF1-33
hdmi: yuv420 resolution retain 4K 50/60H
hdmi: fix current color mode and depth info
hdmi: modify wrong phy freq of 4k@60hz(yuv420)10bit
hdmi: avoid endless loop when i2cm write abnormal
rk3288: apll frequency up to 816M, speed up boot time
fix Haier LS49AL88A92 4K 60/50 mode
hdmi: select similar mode if sink does't support preset mode
Remove ads
Youtube ad-free
Better gamepad support
New RKMC Kodi
Disabled onscreen keyboard sounds and changed highlighted key to blue

https://mega.nz/#!5F8k0agC!B2q-0v4ft...llRceaFcWxhPGQ
pass: nagrace

I need users to test if 4K is working better, pass-through and >1TB hard-drives can be detected and any other small bugs.
Then I can try to fix it soon since I will be working on other ROM's later.

[mo123]

Hi,

Thanks mo123 for this wonderful rom.
I installed it on my Tronsmart. Everything is working perfectly but only the Power off does not work. The Power off reboot my box instead of turn off.
Same thing happens when I used Quick Boot Pro app.
Any workaround to power off correctly the Tronsmart box ?

Thanks in advance for your help.

Yoiu can try Reboot app by Petrus perhaps?

https://play.google.com/store/apps/details?id=fr.petrus.tools.reboot&hl=en

[Chris_Gee_]

Hi Mo.

Flashed the latest ROM on my HPH NTV6.

Usual method erased flash before upgrade.

It gets to 100% then the box reboots and does the usual cleanup then it just sticks and doesn't load.

[m1pnk]

got same on a box im just doing mo.... its getting stuck on formatting cache

[mo123]

got same on a box im just doing mo.... its getting stuck on formatting cache

I will just check and flash on 2 different devices again to see if I get the same problem.

[m1pnk]

my first flash on a new box was fine ???

[nick20000]

Hi Mo,
Could you help to check the USB audio auto routing function on V1.12. I found V1.12 can't use ext USB sound card...Thanks for your great ROM!!!

[mo123]

Hi Mo,
Could you help to check the USB audio auto routing function on V1.12. I found V1.12 can't use ext USB sound card...Thanks for your great ROM!!!

You can uncomment the # in the /system/etc/audio_policy.conf file.