[ROM] AlfaWise H96 PRO+ 3/32 and 3/16 - SCV2 ROM (DDR3 ONLY)

[sbegel]

Wrong thread, pls delete.

[segamegadave]

Great ROM, I have a Beboncool bluetooth gamepad I was hoping would work with this, it connects via bluetooth but is not recognised by any apps. Could anyone give me any advice on where to go with this? I have been searching for modules and ways of installing but am a little lost.

[krazy_192]

superceleron or whomever can help. I recently received my Alfawise H96 Pro+ 3g/32g US plug (DDR 3) android box and the wifi reception is lousy! I have an older Q-box in the same area and it gets 13-16 Mbps, while the Alfawise only gets .5-2 Mpbs. I am not very happy with this box and Gear Best is doing little to help me out. I am tempted to flash the box using the method above, but fear that the wifi issue will not be resolved. Is there a way to resolve the "lack of" wifi reception to this box? I have tested this out on several different locations (mom's and friend's house) and I got the same result of the lousy connection. I did note however, that if the Alfawise is directly on top/or below the router I get my close to what my other box gets. I know I will not get full contract with ISP speeds via wifi, but know it should be more than .5-2 Mbps! Any help would be greatly appreciated! I have been looking for more info on this and have not found much!

[mriver71]

Power On from full shutdown not working with the remote. There is no way to solve it?

Sent from my SM-N920T using Tapatalk

[superceleron]

Power On from full shutdown not working with the remote. There is no way to solve it?

Sent from my SM-N920T using Tapatalk

Nop, mine have the same problem... its a hw problem even with the stock rom dont work!

[jlgmax]

Can anyone help please, I enabled the restricted profile in the menu and left the default setting for apps ie allow settings menu only. When the box boots now I only have access to the settings menu (as expected) butthe only options are network, about device, accessibility, add accessory and remote. I cannot find a way to enter my pin and load my full profile!

Anyone have any ideas how to log back into the main profile?

Thanks.

[Wingchundub]

Brought a new lease of life to my rbox pro 3g, installed via image burntool and i do love it.
Thank you for sharing your work, it really is appreciated.
Best wishes

[Wingchundub]

Power On from full shutdown not working with the remote. There is no way to solve it?

Sent from my SM-N920T using Tapatalk

Yes, get off your backside, unplug and reinsert plug to power back up lol

[hujik]

After few weeks of trying to solve some minor bugs, sound issues, random restarts and my wife's complaining related to this box, I have bought nvidia shield tv, and it was my best choice related to electronics for last few years.
Just FYI.

[Wyle]

Nop, mine have the same problem... its a hw problem even with the stock rom dont work!

I found the POWER DOWN problem is something you have to set it somewhere in the ROM's SETTING Menu.

I will detail it when I can find it again.

All I can remember is You have to change it from SLEEP MODE to POWER DOWN mode - Then the REMOTE can make device SHUT DOWN (Power Down).

[superceleron]

yes i know of that, i mean the problem is power on from full shutdown and that is not fixable in the setting

[DNIZoid]

yes i know of that, i mean the problem is power on from full shutdown and that is not fixable in the setting

I can wake the box after full shutdown.

[Wyle]

I've Been trying the various ROMs - Thanks SuperCeleron and MegaTrendz!

I tried flashing this ROM thru USB burning tools on my H96 Pro+ and I am getting ERROR= 0x10105002 Romcode/Initialize DDR/Read initialize status/USB Control setup error ... It originally took the SCV3-ATV using SD Card method...but this one wouldn't work that way, for me.

Anyone know what this ERROR code means?

[Classicman]

There's a great video by TV Box Stop showing how to upgrade the Alfawise or different branded H96 Pro Plus with new Android 7.1 firmware on YouTube. Just Google it.

[ecleptor]

Hello i updated my h96 pro + with usb burning tools. Everything worked fine with the tools. Now my box dont wanna start? onley get on my tv No video singnal??