[ROM] AlfaWise H96 PRO+ 3/32 and 3/16 - SCV2 ROM (DDR3 ONLY)

[H96ProNOTplus_3_16_q6330]

Hooo wifi, this one is only for QCA9377(LTM8830) chip

In case i would loose wifi only it is not issue for me since LAN cable provides the network.
Trying to make sure if RAM module is DDR3 or not... I will provide some RAM closeup in case no exact evidence.
Thank you for your prompt answers.

[H96ProNOTplus_3_16_q6330]

In case i would loose wifi only it is not issue for me since LAN cable provides the network.
Trying to make sure if RAM module is DDR3 or not... I will provide some RAM closeup in case no exact evidence.
Thank you for your prompt answers.

Hi,

Hardware info: KLMAG2GE4A-A001 eMMC flash, two SpekTek PE025-125 F1622 RAM chips and two SpekTek PE039-125 TP RAM chips, Pulse H5007NL and Realtek RTL8211F transceiver for Gigabit Ethernet, and AP6255
Exactly the same as in http://www.cnx-software.com/2016/10/...-and-teardown/ , but with H96 Pro plastic body.
Could you please help me to confirm based on that i can safely flash superceleron rom? (I dont care if wifi/bt not works at all.)

[michael2t]

About [ROM] AlfaWise H96 PRO+ 3/32 and 3/16 - SCV2 ROM (DDR3 ONLY)
Will This Version Firmware TWRP work with root magisk ??

Michael T.

[danielelek90]

Hey superceleron I installed this ROM today and it's amazing. You've done incredible work! I am just wondering, did you manage to get a fix for the IR remote power button? Would replacing the remote.conf with stock work? Perhaps the vendor keylayouts as well? Thanks in advance!

[superceleron]

The power button problem is only on some boxes and is a hw problem, mine have it and some others that was sold how many dunno...
And that wont fix it!

[apollo_2]

Hi.
This rom works in Alfawise H96 Pro+ TV Box 3GB RAM + 64GB ROM?
Thanks

[skippaj]

Slt,


Originally posted by Valek View Post "merci à lui"

Install firmware with a microSD card

STEP 1 (download and extract).
Download :
Burn Card Maker and firmware

Extract "TF.rar" and firmware in the same folder.
Now you get "Burn_Card_Maker.exe" and firmware file.

Rename le firmware update.img

Put a microSD card in your computer (on Windows) and go to the second step.

STEP 2 ("make" the microSD card)
Run "Burn_Car_Maker.exe"
The first time it's in chinese, click on the top lef menu, click on the second option, check "English" and put "OK".
Close and restart "Burn_Car_Maker.exe"
Chose disk: (Letter of your microSD card)
"YES" must be check 3 times for "To Partition and Format", "erase_flash" and "Reboot" (erase_bootloader must be uncheck).
Click on "Open" and chose firmware img.
Click on "Make", format the microSD card (default settings), after that the rom copy begin on the microSD card, when it's done you get a "Success" message.

STEP 3 (installation)
Now, insert the microSD card in the device (power supply unplug/off).
Let your TV on and the HDMI cable plugged.
With a paper clip or other, press the reset button and hold it (small hole under the box), in the same time plug the power supply on the Beelink GT1.

Cdt,

Will this work on the MadCatz Mojo?

[christopherDurand]

Hi guzs i NEED HELP, i was trying to update the Firmware and i tick the box Erase Bootloader !! now my H96 3/32 pro dosent event reset i think it crushed i donnt know i have the blue light it stays on but nothing on TV ... do you know what i should do ?

[zepcc]

Hi
I tried to update the firmware with burning tool, but it's stuck on 4% (download UBOOT) with the error:
[Err]--[0x10303004]Romcode/Switch status/Identify/Error result

Do you know what can I do?

Thanks

[Hoffman]

Hi all,

I tried to change to this rom with sdcard and the box is stuck in upgrading message.......... You have any idea?

Model : H96 pro + 3 Ram / 32 Rom - 7.1.2

Thanks

[DOMin8or]

what kind of 7.1.2 rom? original? scv4?
normaly all version from 7.x.x are working on ddr3 and ddr4 boxes.
for a while i flashed a ddr4 box with the wrong firmware (6.x.x) and it stuck at 7%.
the box was dead, and no more flashing was possible. (enter recovery not possible, any more)
did you tried to flash an other version? did it stuck at the same part?
please try the burn card maker and scv4.
good luck.

(without any warranties! please read the form carefully before you do the next. my info
is only theorie and i have never tried it. it could be extremely wrong. on my question
how to use the OTG, i never became an answear. but there are not so many ways
to use OTG...)

if sd card burner will not work, do you can try to flash it via OTG usb and the USB burning tool.
i dont know where the otg port is. maybe between 2 big usb ports. look at the pcb.
cut an old usb cable, check pcb with a multimeter the outer pins für 5v and ground, check colors on the usb cable to check what 5v and ground is.
solder it, and the inner 2 cables are the data cables. there are only to possibillities to solder it-... lol
i dont have experience with this tool. please read the forum for details.
and let me know if you gut success..
DO IT ON YOUR OWN RISK.
SEARCH THE FORUM FOR MORE INFOS

[darkteckno]

what kind of 7.1.2 rom? original? scv4?
normaly all version from 7.x.x are working on ddr3 and ddr4 boxes.
for a while i flashed a ddr4 box with the wrong firmware (6.x.x) and it stuck at 7%.
the box was dead, and no more flashing was possible. (enter recovery not possible, any more)
did you tried to flash an other version? did it stuck at the same part?
please try the burn card maker and scv4.
good luck.

(without any warranties! please read the form carefully before you do the next. my info
is only theorie and i have never tried it. it could be extremely wrong. on my question
how to use the OTG, i never became an answear. but there are not so many ways
to use OTG...)

if sd card burner will not work, do you can try to flash it via OTG usb and the USB burning tool.
i dont know where the otg port is. maybe between 2 big usb ports. look at the pcb.
cut an old usb cable, check pcb with a multimeter the outer pins für 5v and ground, check colors on the usb cable to check what 5v and ground is.
solder it, and the inner 2 cables are the data cables. there are only to possibillities to solder it-... lol
i dont have experience with this tool. please read the forum for details.
and let me know if you gut success..
DO IT ON YOUR OWN RISK.
SEARCH THE FORUM FOR MORE INFOS

What are you replying to?

[bodrick]

Hi.
Can I get the last working RGB fix application as a separate installation file?

Thanks

[superceleron]

Hi.
Can I get the last working RGB fix application as a separate installation file?

Thanks

Nop, that app only works with my custom kernel, so theirs no use on other roms!

[gamer01]

hey bro, can working with unbrand h96 pro plus????
btw what scv2 rom???
can ask something how working play game using usb gamepad dual shock 3 or 4, usually i play it with connection bluetooth.

[mslim]

Just a request or query: I presume if the filename of the ROM does not specifically mention the wifi chip (9337 or 6330), the Firmware is ok to be used on generic H96Pro+?


Sent from my iPhone using Tapatalk