Binary patched kernels for Pipo models

[herrjemineh]

Really? My china Phone based mtk6589 takes around 3% a night in deepsleep

[giouncino]

I see. I'd do it, of you upload your kernel.img.

So, after leaving tablet alone over night and the whole day cpuspy showed me a time of deepsleep around 17 hours but still i had a batterydrain of 15% in that time unfortunately... has anyone another idea related to this problem?

that is probably because you left wifi and/or GPS/bluethoot on.
If you set the tablet in airplane mode you can leave it in deep sleep for 10 hours for less than 1% of battery drain!

[herrjemineh]

I'll try that as well..

[heisenberg]

Any volunteers?? I'd really like to get this 32GB tablet stable.

Here is a Kernel, you might ask for. I didn't had the exact settings, so I created an own one for you with the follwing setting:
"cpu1704h" =>
[
[875000, 312000],
[900000, 504000],
[950000, 816000],
[1025000, 1008000],
[1150000, 1200000],
[1250000, 1416000],
[1375000, 1704000],

And RAM to 1225mV

Here it is:

https://dl.dropboxusercontent.com/u/24735317/Kernelscript_nodabble.zip

[nodabble]

Here is a Kernel, you might ask for. I didn't had the exact settings, so I created an own one for you with the follwing setting:
"cpu1704h" =>
[
[875000, 312000],
[900000, 504000],
[950000, 816000],
[1025000, 1008000],
[1150000, 1200000],
[1250000, 1416000],
[1375000, 1704000],

And RAM to 1225mV

Here it is:
https://dl.dropboxusercontent.com/u/...t_nodabble.zip

Thanks for that. Sadly it failed to boot. Just hung on the RileyRom shield. Humph.

[herrjemineh]

You need higher voltage for the ram, i guess?

[giouncino]

You need higher voltage for the ram, i guess?

I agree with you,
try to 1.3V for the ram...
In any case for that unlucky tablet I suggest to go with stock kernel, because with the combination of 1704Mhz@1375mV AND 720Mhz@1300mV the battery drain increase could be significant....

[Pipo2000]

I agree with you,
try to 1.3V for the ram...
In any case for that unlucky tablet I suggest to go with stock kernel, because with the combination of 1704Mhz@1375mV AND 720Mhz@1300mV the battery drain increase could be significant....

Giouncino,

Try to give hime a kernel with 1.6Ghz CPU @ 1250mV and mem at 667@1250mV and he will have a slight overclock that is well within specs, yet will give him a little performance boost over the stock ROM.

I'm still on ur 1704/600/720 low voltage from one of your first posts on RR 1.3a and still no issues and performance is more than OK for me... so its my permanent kernel now.

[herrjemineh]

720 ram will surely run with 1.3v

[nodabble]

I agree with you,
try to 1.3V for the ram...
In any case for that unlucky tablet I suggest to go with stock kernel, because with the combination of 1704Mhz@1375mV AND 720Mhz@1300mV the battery drain increase could be significant....

I would be willing to try this.

It's just that having achieved 1704/600/720 on the other tablet (which now belongs to my parents) I feel somewhat disappointed that I can't get the same level on the new tablet.

[heisenberg]

I would be willing to try this.

It's just that having achieved 1704/600/720 on the other tablet (which now belongs to my parents) I feel somewhat disappointed that I can't get the same level on the new tablet.

Here it is:

https://dl.dropboxusercontent.com/u/24735317/kernel_cpu1704h_gpu600_ddr720_1.4based_RAM1300mV.zip

Same settings for CPU AND 1300mV to RAM

[herrjemineh]

That has to work..

[nodabble]

LOL! I'll let you know when I get home later!

[nodabble]

Here it is:

https://dl.dropboxusercontent.com/u/24735317/kernel_cpu1704h_gpu600_ddr720_1.4based_RAM1300mV.zip

Same settings for CPU AND 1300mV to RAM

Welllll... it booted - which is more than most of the others have done, but it failed to complete Antutu. I've been flashing an awful lot of kernels lately and I'm wondering if a complete ROM reflash would be advisable. I've just reflashed it with the stock kernel and it's hung at 21% on Antutu.

Yep, I think it's time to do a complete refresh. I'll keep you posted. Oh - and thanks guys for your help!

[nodabble]

Yep, I think it's time to do a complete refresh. I'll keep you posted. Oh - and thanks guys for your help!

Oh dear! I've just done a complete refresh with ROM M6 Pro Riley1.4.2 - all the defaults, no alterations - and it's hung at 21% in Antutu. What is wrong with this damned tablet??? I know the M6 Pros are versatile so is it looking like I've purchased a duff one? I'd like to send it back for an exchange, but I'm not sure on what grounds I could warrant this action. Aaargh!