live TV for all rk3188 using XBMC and tvheadend

[taki]

can you copy dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw to system/etc/firmware

https://github.com/OpenELEC/dvb-firmware/blob/master/firmware/dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw

[nayef]

Dmesg not found skystar .thus everting ok but we have to search for driver.

Why dont create dev/dvb¿

i'am created "Manual" folder :
/dev/dvb ...
/tmp/virtual_adapter ...

and set 777

i don't why "mkdir" not working in "/tmp" ? and after restart not found ?

something wrong

[nayef]

can you copy dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw to system/etc/firmware

https://github.com/OpenELEC/dvb-firmware/blob/master/firmware/dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw

already copy to system/etc/firmware and set 777

[taki]

no need tmp folder and virtusl adapter
you use
mkdir /dev/dvb
mkdir /data/dvb/.hts
mkdir /data/dvb/.hts/imagecache
mkdir /dev/dvb/adapter0
ln -s /dev/dvb0.frontend0 /dev/dvb/adapter0/frontend0
ln -s /dev/dvb0.demux0 /dev/dvb/adapter0/demux0
ln -s /dev/dvb0.dvr0 /dev/dvb/adapter0/dvr0
ln -s /dev/dvb0.dvr0 /dev/dvb/adapter0/dvr0.ts
ln -s /dev/dvb0/ca0 /dev/dvb/adapter0/ca0
mkdir /dev/dvb/adapter1
ln -s /dev/dvb1.frontend0 /dev/dvb/adapter1/frontend0
ln -s /dev/dvb1.demux0 /dev/dvb/adapter1/demux0
ln -s /dev/dvb1.dvr0 /dev/dvb/adapter1/dvr0
ln -s /dev/dvb1.dvr0 /dev/dvb/adapter1/dvr0.ts

must be create on boot thus need init.d

all modul loaded later automatic loading dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw firmware fw.
you can look dmesg. you can see


usb 1-1: new high-speed USB device number 2 using ehci-brcm
technisat-usb2: set alternate setting
dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw'
usbcore: registered new interface driver dvb_usb_technisat_usb2
usb 1-1: USB disconnect, device number 2
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 1-1: new high-speed USB device number 3 using ehci-brcm
technisat-usb2: set alternate setting
technisat-usb2: firmware version: 17.63

dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

DVB: registering new adapter (Technisat SkyStar USB HD (DVB-S/S2))

stv6110x_attach: Attaching STV6110x

usb 1-1: DVB: registering adapter 2 frontend 0 (Technisat SkyStar USB HD (DVB-S/S2))...
dvb-usb: Technisat SkyStar USB HD (DVB-S/S2) successfully initialized and connected.

[nayef]

no need tmp folder and virtusl adapter
you use
mkdir /dev/dvb
mkdir /data/dvb/.hts
mkdir /data/dvb/.hts/imagecache
mkdir /dev/dvb/adapter0
ln -s /dev/dvb0.frontend0 /dev/dvb/adapter0/frontend0
ln -s /dev/dvb0.demux0 /dev/dvb/adapter0/demux0
ln -s /dev/dvb0.dvr0 /dev/dvb/adapter0/dvr0
ln -s /dev/dvb0.dvr0 /dev/dvb/adapter0/dvr0.ts
ln -s /dev/dvb0/ca0 /dev/dvb/adapter0/ca0
mkdir /dev/dvb/adapter1
ln -s /dev/dvb1.frontend0 /dev/dvb/adapter1/frontend0
ln -s /dev/dvb1.demux0 /dev/dvb/adapter1/demux0
ln -s /dev/dvb1.dvr0 /dev/dvb/adapter1/dvr0
ln -s /dev/dvb1.dvr0 /dev/dvb/adapter1/dvr0.ts

must be create on boot thus need init.d

all modul loaded later automatic loading dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw firmware fw.
you can look dmesg. you can see


usb 1-1: new high-speed USB device number 2 using ehci-brcm
technisat-usb2: set alternate setting
dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw'
usbcore: registered new interface driver dvb_usb_technisat_usb2
usb 1-1: USB disconnect, device number 2
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 1-1: new high-speed USB device number 3 using ehci-brcm
technisat-usb2: set alternate setting
technisat-usb2: firmware version: 17.63

dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

DVB: registering new adapter (Technisat SkyStar USB HD (DVB-S/S2))

stv6110x_attach: Attaching STV6110x

usb 1-1: DVB: registering adapter 2 frontend 0 (Technisat SkyStar USB HD (DVB-S/S2))...
dvb-usb: Technisat SkyStar USB HD (DVB-S/S2) successfully initialized and connected.

my dvbs2 : "Technisat SkyStar USB 2" not "Technisat SkyStar USB HD"

maybe can't start with dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw

[taki]

hello

can "Technisat SkyStar USB DVB-s2" working on Minix X7 ?

driver Linux i think here http://linuxtv.org/wiki/index.php/Te...SkyStar_USB_HD

i'am use last fw from Minix ...

any one can help me ?

you linked skystar hd . we fault. Technisat-SkyStar-USB-2 is different skystar usb HD. is your device Technisat-SkyStar-USB-2

http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_2_HD_CI

has cı you device??? (cam slot)
I search modul for usb2 )))))))
you have on board photos. whic chip used

[nayef]

you linked skystar hd . we fault. Technisat-SkyStar-USB-2 is different skystar usb HD. is your device Technisat-SkyStar-USB-2

http://www.linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_2_HD_CI

has cı you device??? (cam slot)
I search modul for usb2 )))))))
you have on board photos. whic chip used

i have this




here last lsmod & dmesg for i dvb:

root@android:/ # lsmod | grep -i dvb
dvb_usb_technisat_usb2 7998 0 - Live 0x00000000
dvb_usb_ttusb2 14320 0 - Live 0x00000000
stv090x 44153 1 dvb_usb_technisat_usb2, Live 0x00000000
dvb_usb 18179 2 dvb_usb_technisat_usb2,dvb_usb_ttusb2, Live 0x00000000
dvb_pll 8282 0 - Live 0x00000000
dvb_core 73999 3 dvb_usb_technisat_usb2,dvb_usb_ttusb2,dvb_usb, Live 0x00000000




root@android:/ # dmesg | grep -i dvb
<6>[ 67.363423] usbcore: registered new interface driver dvb_usb_ttusb2
<6>[ 67.429598] usbcore: registered new interface driver dvb_usb_technisat_usb2
root@android:/ #

[nayef]

maybe can this link help you ?

http://lxr.free-electrons.com/source/drivers/media/usb/dvb-usb/technisat-usb2.c

http://cateee.net/lkddb/web-lkddb/DVB_USB_TECHNISAT_USB2.html

https://lkml.org/lkml/2013/9/5/55

[taki]

maybe can this link help you ?

http://lxr.free-electrons.com/source/drivers/media/usb/dvb-usb/technisat-usb2.c

http://cateee.net/lkddb/web-lkddb/DVB_USB_TECHNISAT_USB2.html

https://lkml.org/lkml/2013/9/5/55

neyef open your skystar-usb-2 and look inside or take photo. which chip used (tuner, demodulator and usb controller) later we make driver. if we have c and h for your box.

[nayef]

neyef open your skystar-usb-2 and look inside or take photo. which chip used (tuner, demodulator and usb controller) later we make driver. if we have c and h for your box.

here photo

[taki]

here photo

I think tahat you have old usb sksytar usb and only support dvbs no s2
you load this modul later log dmesg (insmod other modul you know

http://www35.zippyshare.com/v/67561190/file.html

insmod b2c2-flexcop.ko
insmod b2c2-flexcop-usb.ko

[taki]

http://www44.zippyshare.com/v/97074536/file.html

insmod cx24123.ko
insmod cx24116.ko
insmod cx24113.ko
insmod cx22702.ko
insmod cxd2820r.ko
insmod dvb-usb-cxusb.ko


demodulator driver (İf dont work you have to look your tuner part. which demodulator used )

[taki]

must be this device http://www.linuxtv.org/wiki/index.ph...B_/_Sky2PC_USB
or tuner demodulator
The following drivers are needed for this device:

- stv0299.ko or mt312.ko - b2c2-flexcop.ko - b2c2-flexcop-usb.ko

http://www44.zippyshare.com/v/97074536/file.html

insmod stv0299.ko
insmod mt312.ko

[nayef]

I think tahat you have old usb sksytar usb and only support dvbs no s2
you load this modul later log dmesg (insmod other modul you know

http://www35.zippyshare.com/v/67561190/file.html

insmod b2c2-flexcop.ko
insmod b2c2-flexcop-usb.ko

thanks taki

my box support s2 and HD channel with driver windows

[nayef]

must be this device http://www.linuxtv.org/wiki/index.ph...B_/_Sky2PC_USB
or tuner demodulator
The following drivers are needed for this device:

- stv0299.ko or mt312.ko - b2c2-flexcop.ko - b2c2-flexcop-usb.ko

http://www44.zippyshare.com/v/97074536/file.html

insmod stv0299.ko
insmod mt312.ko

this link mirror http://www44.zippyshare.com/v/97074536/file.html

not have stv0299.ko or mt312.ko