Pipo M7 Pro RileyROM 2.5 KitKat

[TriA]

You do not have to power on the tablet for this method.
just:
1) press reset in the pinhole at back of tablet, shortly
2) connect the tablet to PC
3) press and hold the power button
4) format and flash the tablet while holding the button
maybe it is better to have the charger connected

[ginman]

You do not have to power on the tablet for this method.
just:
1) press reset in the pinhole at back of tablet, shortly
2) connect the tablet to PC
3) press and hold the power button
4) format and flash the tablet while holding the button
maybe it is better to have the charger connected

Doesn't the Tablet turn on if holding down the power button? Again, the flash tool does not see my tablet now, how do i flash?

[rrileypm]

With the USB connected to a USB 2.0 port and the tablet, hold the esc button and press power.

The flash tool should see the tablet in flash mode.

[ginman]

With the USB connected to a USB 2.0 port and the tablet, hold the esc button and press power.

The flash tool should see the tablet in flash mode.

Wow thank you...Now running Kit Kat!!!

But having wifi issues. seeing my network but not connecting. goes from saved to connecting to saved to obtaining IP to saved..... to then not seeing network. I'm right next to my wifi router, it should connect no problem

[rrileypm]

See there? You don't need a new tablet after all...hahaha!!!!!!

[ginman]

See there? You don't need a new tablet after all...hahaha!!!!!!

True but without wifi working, it might as well be bricked. Is anyone else having wifi issues? It's my home network not even password protcted, should just connect. WP2 enabled makes no difference, only gets as far as obtaining ip address

[Franky69]

True but without wifi working, it might as well be bricked. Is anyone else having wifi issues? It's my home network not even password protcted, should just connect. WP2 enabled makes no difference, only gets as far as obtaining ip address

Do you connect to your WiFi home network with the search-and-connect function or do you configure your network (SSID and all the rest) manually and connect to it afterwards? I noticed that connecting to my WiFi network with search-and-connect didn´t work, manually configuring the network and connecting afterwards worked just fine.

[Dennta]

True but without wifi working, it might as well be bricked. Is anyone else having wifi issues? It's my home network not even password protcted, should just connect. WP2 enabled makes no difference, only gets as far as obtaining ip address

No problem with wifi for me, but i´m on rr 2,4 still. I accually got better wifi signal on my m7pro then on my HTC One.
Blutooth on the other hand has very poor signal on my tablet. Any one else noticed this?

I have one more problem that i hope somone can help me with. I use the app Aldiko for reading E-books. This app requires me to have an Adobe-ID. The problem is everytime I flash a new rom Adobe then thinks it´s a new device. You can only have six devices registered on your Adobe-ID. I have now ran out of these six devices which forced me to create a new mail, just to be able to register a new Adobe-ID. Any solution?

[rrileypm]

There is a known bug in this firmware (and other Pipo tablets) that cause problems...even freezes when you attempt to use wifi and bluetooth at the same time. I haven't been able to solve it.

[suunnittelija]

Vs: Pipo M7 Pro RileyROM 2.5 KitKat

No problem with wifi for me, but i´m on rr 2,4 still. I accually got better wifi signal on my m7pro then on my HTC One.
Blutooth on the other hand has very poor signal on my tablet. Any one else noticed this?

I have one more problem that i hope somone can help me with. I use the app Aldiko for reading E-books. This app requires me to have an Adobe-ID. The problem is everytime I flash a new rom Adobe then thinks it´s a new device. You can only have six devices registered on your Adobe-ID. I have now ran out of these six devices which forced me to create a new mail, just to be able to register a new Adobe-ID. Any solution?

I had issues with bluetooth and wifi, but 2.5 fixed everything. Now also bluetooth signal is really good, I can use headphones meters away from the tablet.

[Dennta]

Sv: Pipo M7 Pro RileyROM 2.5 KitKat

Okey. I'll install kitkat soon to see if it gets better. No solution for the Adobe-ID problem?

Skickat från min M7pro via Tapatalk 2

[Franky69]

Okey. I'll install kitkat soon to see if it gets better. No solution for the Adobe-ID problem?

Skickat från min M7pro via Tapatalk 2

you already tried to save your apps before any flashing of our lovely M7 with AppMonster or Titanium Backup and reinstall it after successfull flashing?

[Dennta]

Sv: Pipo M7 Pro RileyROM 2.5 KitKat

you already tried to save your apps before any flashing of our lovely M7 with AppMonster or Titanium Backup and reinstall it after successfull flashing?

Yeah I always backup my apps with titanium before flashing. But for some reason that app don't seem to remember the tablet.

Skickat från min M7pro via Tapatalk 2

[Franky69]

Final KitKat Version ??

Randy, any indication when a final KitKat version for the M7 Pro will be released by PIPO? Your current ROM 2.5/2.5.1 really runs very well (for me) but do you have any information about something like a final KitKat release for the M7 Pro which maybe will be refined by you ?

[Franky69]

Yeah I always backup my apps with titanium before flashing. But for some reason that app don't seem to remember the tablet.

Skickat från min M7pro via Tapatalk 2

... seems to be not a PIPO-specific problem. One of the ... - O.K., not very comfortable - ... ways is to contact the Adobe tech support ro reset your Aldiko activation and reinstall that app. This problem is known by a lot of portable device users.

As far as I know you´ll be able to activate Aldiko on 6 devices .... every change of hadware (which unfortunately means flashing of devices is included) increases the number of activated devices.