Kitkat Kernels for All (well most!)

[d33]

Kitkat Kernels for All (well most!)

So Mr. D., I have begun to test your kernels on my cs968 ap6210.

First kernel I picked with Finless T428 Kitkat is a good start. It was the kernel_T_AP6210_HD.img.
I have still trouble with booting, the old issue. I need power over otg and after booting I need to add the power connection to get keyboard and mouse over usb. Sounds silly, but you can believe me.
After installation, the rom works more fluid than the last one, I check. It seems very stable with 15736 antutu at 1.42 GHz cpu clock.
This time audio and video work fine, bt too. Only ethernet stays still unconnected.Haven't tested AV video or didital audio out. I have no flickering with this kernel.

You are getting very close. I test another version.

JDfense

What is your Ethernet chipset? Can you send me DMESG ?


Sent from my iPhone using Tapatalk

[JDfense]

The first kernel I tested, ist the best for the cs968, I think.

I found another thing. SD cart will be switched off and I can't activated as long I have otg connected to pc, but when I pull it the rom freezes after some seconds. DMESG is coming soon.
Booting is not easy, sometimes it loops or restart while boot process.
I asume with the power supply connection s something not so much standard. I have checked strong universal power supplies, but no change. Maybe they have used cheapest cheopo parts they found in the whole country to built the power supply.

Could it be, that ethernet connection get not enough power.

JDfense

[JDfense]

Here is the dmesg file, d33.

http://www.mediafire.com/view/z6ikm37777mddjl/cs968dmesg_kernel_T_AP6210_HD.img.txt

JDfense

[d33]

Here is the dmesg file, d33.

http://www.mediafire.com/view/z6ikm37777mddjl/cs968dmesg_kernel_T_AP6210_HD.img.txt

JDfense

So first we see it's a RK3188T but a good one


<4>[ 0.732129] efuse_version_val: efuse version = 31
<4>[ 0.732175] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 3000
<4>[ 0.732240] efuse_version_val: efuse version = 31
<4>[ 0.732283] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 3000
<6>[ 0.733198] CPU is ROCKCHIP RK3188T<6>[ 0.733236] NEOMODE the eFuses are (22) = 2b and (23) = 1
<4>[ 0.733612] rk3188 cpufreq version 2.2, suspend freq 816 MHz

Next we see it recognises the Audio/video codec

<4>[ 1.593320] audio_card_init end....
<6>[ 1.593351] ALSA device list:
<6>[ 1.593373] #0: RK29_RK1000

Now something odd starts it diconnects/reconnects the internal hub

<6>[ 9.849800] usb 2-1: USB disconnect, device number 2
<6>[ 10.199866] usb 2-1: new high speed USB device number 3 using usb20_host
<6>[ 10.411014] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
<6>[ 10.411100] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>[ 10.411164] usb 2-1: Product: USB 2.0 Hub
<6>[ 10.412903] hub 2-1:1.0: USB hub found
<6>[ 10.414012] hub 2-1:1.0: 4 ports detected

<6>[ 27.850084] usb 2-1: USB disconnect, device number 4

and again, but this time if finds ethernet

<6>[ 38.809845] usb 2-1.1: new high speed USB device number 11 using usb20_host
<6>[ 38.911052] usb 2-1.1: New USB device found, idVendor=0b95, idProduct=772b
<6>[ 38.911156] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 38.911253] usb 2-1.1: Product: AX88772B
<6>[ 38.911308] usb 2-1.1: Manufacturer: ASIX Elec. Corp.
<6>[ 38.911378] usb 2-1.1: SerialNumber: 000001
<6>[ 39.582970] ASIX USB Ethernet Adapter:v4.1.1 19:19:36 Mar 9 2014
<6>[ 39.582985]
<6> http://www.asix.com.tw
<4>[ 39.583053] ----> axusbnet_probe 1276:bind ASIX AX88772B USB 2.0 Ethernet

and it is still there when the DMESG stops

[PRUNCHESS]

I'm eager to try out these 1080p kernels. I've got a MK809iii. I'm using neomode's CUSTOM ROM MK809III AP6210 Version 1.9a. Can anyone recommend a kernel to use?

[yerzu]

I'm eager to try out these 1080p kernels. I've got a MK809iii. I'm using neomode's CUSTOM ROM MK809III AP6210 Version 1.9a. Can anyone recommend a kernel to use?

This are KitKat kernels and You shoud flash it with:

http://www.freaktab.com/showthread.php?11036-NEW-T428-KitKat-Finless-ROM-2-0

Remember use 2.08 loader and use boot720/1080.img from Fineless post at the end of prev page.

[PRUNCHESS]

This are KitKat kernels and You shoud flash it with:

http://www.freaktab.com/showthread.php?11036-NEW-T428-KitKat-Finless-ROM-2-0

Remember use 2.08 loader and use boot720/1080.img from Fineless post at the end of prev page.

I'll give it a try and get back to you. Thank you for the suggestion.

[JDfense]

So first we see it's a RK3188T but a good one


<4>[ 0.732129] efuse_version_val: efuse version = 31
<4>[ 0.732175] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 3000
<4>[ 0.732240] efuse_version_val: efuse version = 31
<4>[ 0.732283] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 3000
<6>[ 0.733198] CPU is ROCKCHIP RK3188T<6>[ 0.733236] NEOMODE the eFuses are (22) = 2b and (23) = 1
<4>[ 0.733612] rk3188 cpufreq version 2.2, suspend freq 816 MHz

Next we see it recognises the Audio/video codec

<4>[ 1.593320] audio_card_init end....
<6>[ 1.593351] ALSA device list:
<6>[ 1.593373] #0: RK29_RK1000

Now something odd starts it diconnects/reconnects the internal hub

<6>[ 9.849800] usb 2-1: USB disconnect, device number 2
<6>[ 10.199866] usb 2-1: new high speed USB device number 3 using usb20_host
<6>[ 10.411014] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
<6>[ 10.411100] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>[ 10.411164] usb 2-1: Product: USB 2.0 Hub
<6>[ 10.412903] hub 2-1:1.0: USB hub found
<6>[ 10.414012] hub 2-1:1.0: 4 ports detected

<6>[ 27.850084] usb 2-1: USB disconnect, device number 4

and again, but this time if finds ethernet

<6>[ 38.809845] usb 2-1.1: new high speed USB device number 11 using usb20_host
<6>[ 38.911052] usb 2-1.1: New USB device found, idVendor=0b95, idProduct=772b
<6>[ 38.911156] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 38.911253] usb 2-1.1: Product: AX88772B
<6>[ 38.911308] usb 2-1.1: Manufacturer: ASIX Elec. Corp.
<6>[ 38.911378] usb 2-1.1: SerialNumber: 000001
<6>[ 39.582970] ASIX USB Ethernet Adapter:v4.1.1 19:19:36 Mar 9 2014
<6>[ 39.582985]
<6> http://www.asix.com.tw
<4>[ 39.583053] ----> axusbnet_probe 1276:bind ASIX AX88772B USB 2.0 Ethernet

and it is still there when the DMESG stops

Does this mean I have to configure the ethernet manuel for propper connection and why do I need this power supply trick with usb and power connection.

JDfense

[yerzu]

Does this mean I have to configure the ethernet manuel for propper connection and why do I need this power supply trick with usb and power connection.

JDfense

Probably Your 4ports hub is a piece of crap and is unstable or driver is bugged and cannot handle... Try with hub which have power supply connector to power up usb devices plugged in it.

[d33]

Probably Your 4ports hub is a piece of crap and is unstable or driver is bugged and cannot handle... Try with hub which have power supply connector to power up usb devices plugged in it.

The hub is part of the circuit board - this is a "TV box"

[yerzu]

The hub is part of the circuit board - this is a "TV box"

I see, then they should try with another main power supply i'm right?

But why it detect 4 ports? This device have 4 ports or rest are blind circut?

[PRUNCHESS]

This are KitKat kernels and You shoud flash it with:

http://www.freaktab.com/showthread.php?11036-NEW-T428-KitKat-Finless-ROM-2-0

Remember use 2.08 loader and use boot720/1080.img from Fineless post at the end of prev page.

Yeah, I tried both 3188 and 3188T kernels. It looks great and runs smooth but no bluetooth or wifi on MK809iii.

[yerzu]

Yeah, I tried both 3188 and 3188T kernels. It looks great and runs smooth but no bluetooth or wifi on MK809iii.

Which wifi chip You have on it?

[meklen]

[QUOTE = d33; 154586] Поддержка включен. Обеспечить буферу для отладки. [/ QUOTE]
D33, I'm sorry, but I could not understand what I need to do with the buffer debugging? I'm a noob

[d33]

Kitkat Kernels for All (well most!)

I see, then they should try with another main power supply i'm right?

But why it detect 4 ports? This device have 4 ports or rest are blind circut?

I'm not certain but I think the norm is to connect two rk3188 USB circuits. One drives the OTG and the other is either a standard port (tv stick) or a 4port hub (tv box). On the tv box at least one of the Ports is wired to an on circuit Ethernet USB device.


Sent from my iPhone using Tapatalk