Kitkat Kernels for All (well most!)

[berik]

...

Hi d33

I have a Cozyswan S400 (RK3188 - not 'T') - a clone of MK802IV Old Wifi (I think)

Right now :

T428 KitKat Finless ROM 2.0
kernel_RTL8188_HD_v207.img

Running OK - Wifi OK - but no Bluetooth

Tried your kernel_RTL8818_HD_v300.img - no boot/no signal

Compared kernel_RTL8818_HD_v300.img and kernel_RTL8818_SD_v300.img - they are equal

Maybe there is a failure

Please fix it, if you don't mind

Thanks for your hard work

Best regards

[d33]

Kitkat Kernels for All (well most!)

I may have a go at adding BT again but I got loads broken symbols last time


Sent from my iPhone using Tapatalk

[tinyhands]

I have now v3.0 hd_t version on my mk908II with 1.7/stockgpu/800ddr, and it works great, this with additional radiator and 3.5A usb hub power source, my antutu score is 19404. Thanks d33!

Ditto thanks to d33 and thanks also to noderat for posting the patchomatic OCs. I'm running v3.0_HD_t on my mk908ii with cpu1.6/gpu798/ddrstock to get a score over 20000. cpu1.7 crashed for me in antutu and I don't think the gpu798 is really doing anything for me. Haven't had time to test any ddr-oc but I'm thinking I need to rig up a better radiator & fan first.

[norbert6]

AW: Kitkat Kernels for All (well most!)

Ditto thanks to d33 and thanks also to noderat for posting the patchomatic OCs. I'm running v3.0_HD_t on my mk908ii with cpu1.6/gpu798/ddrstock to get a score over 20000. cpu1.7 crashed for me in antutu and I don't think the gpu798 is really doing anything for me. Haven't had time to test any ddr-oc but I'm thinking I need to rig up a better radiator & fan first.

Hey, can you please post the individual scores of the benchmark?
I'm running nearly the same setup but higher ddr frequency, but my score is just 18900

[d33]

Digger: Vmac patch applied and compiled. It boots fine on my box but then gets wrapped with:

<4>[ 125.339875] Time out for waiting mdio completion

Perhaps it needs the RTL device. Give it a try and let me know

Here

BT still too hard to fix

[digger]

Hey, can you please post the individual scores of the benchmark?
I'm running nearly the same setup but higher ddr frequency, but my score is just 18900

Hi norbert,
At first thank you very much for your work with OCing d33's beautiful kernels.
I tried kernel_RTL8188_HD_v3.10_cpu1800h_gpu798h_ddr720 on my K-R42 (with "T" chip!!!) and had AnTuTu(V.4.0.4) scores 21046/GPU(2D+3D)=4532.
Now I have flashed kernel_RTL8188_HD_v3.10_cpu1704h_gpu798h_ddr800 and my scores are 20729/GPU(2D+3D)=4974
Also I mesuared temperature during the tests. It wasn't more than 50C. My device has stock heatsink(22x22x6).
What setup are you interested in?
I can do it for you and share results.

[digger]

Digger: Vmac patch applied and compiled. It boots fine on my box but then gets wrapped with:

<4>[ 125.339875] Time out for waiting mdio completion

Perhaps it needs the RTL device. Give it a try and let me know

Here

BT still too hard to fix

I do right now

[digger]

I do right now

Dear d33,
I have just tried this kernel.
It's GREAT, both LAN and wifi WORK
But I've noticed some bug with automatic swithching between Lan and wifi.
I'll make detailed test now so as to determine dependency and inform you a little bit later.

[Max One]

Max One
i had the problem with booting with ROM Tronsmart A928 KitKat 4.4.2 Finless 2.0 ROM
but now i use T428 KitKat Finless ROM 2.0 and it boots every time and it's fast
21.000 antutu....

Lonely2k bro, im using it the whole time. Atm my favorite rom but it still has the mentioned boot problems with kernel 3.00 and 3.10 J22.

http://www.freaktab.com/showthread.php?11193-Kitkat-Kernels-for-All-(well-most!)&p=161427&viewfull=1#post161427

On which kernel exactly did you score 21000 antutu points?


Poz

[digger]

Digger: Vmac patch applied and compiled. It boots fine on my box but then gets wrapped with:

<4>[ 125.339875] Time out for waiting mdio completion

Perhaps it needs the RTL device. Give it a try and let me know

Here

BT still too hard to fix

d33,
I'm going on kernel test. But first thing I've noticed that it is a "_t_" kernel with 1,4Ghz CPU lock.
I think it will take about 30 min so as to have full report about dependancy of LAN/wifi switching.

[d33]

Updated OP with v3.11a for RK8188EU TV Boxes

[d33]

Test for alt-AP610 kernels series TV STICKS (Cx-919II, J22, etc etc)

V3.10

[Max One]

I´m gonna test it in some min.

[roooii]

Test for alt-AP610 kernels series TV STICKS (Cx-919II, J22, etc etc)

V3.10

Model: CX919-II
CPU: RK3188-T
Test run time: 15 minutes
Bluetooth: works
Wifi: works
Android: ap6210_kitkat_finless20_beta2

Still won't boot sometimes. It booted properly 9 out of 12. I'd be happy to help testing some more. If I'm doing something wrong let me know.

Edit: It might be a feeling, but it seems to me that this kernel is booting up a lot more than with kernel 3.0 I tried yesterday.

Edit #2: For your information I flashed: kernel_t_AP6210-alt_HD_v310.img

[digger]

Dear d33,
Here is what I've found out about combinations in settings concerning the LAN/wifi mutual switching.
Situation 1.
-LAN On and WIFI Off>reboot>LAN is picked up and WIFI is disabled-O.K.
Situation 2.
-LAN Off and WIFI On>reboot>LAN is unconnected and WIFI is picked up-O.K.
Situation 3.
- LAN On and WIFI On>reboot>LAN is unconnected and WIFI is searching for Wi-Fi network but can't find it. In this situation when I switch off both LAN and wifi then I can switch them on separately.
What combinations of settings would you prefer for DMESGs I can make?
And also I have some tiny, not too important for now details which I wouldn't like to distract you with. I'll inform you after we(users) do main tests.
Kind Regards