Kitkat Kernels for All (well most!)

[EzerchE]

Mhhh... try this:

- Look for RKRemoteControl v2.0.3 apk and install it in some phone/tablet.
- Once installed, pair it with your device and look for Control tab.
- Press Power touch button and your device will enter in suspend mode.
- When you turn TV on again, press Power touch button again to restore it.

Greetingz.

There is no remote server working on it i tried to install ehomemedicenter but rkremote could not find the mk908.

[KingSombra]

If your using 4.2 kernel in Smics kk rom thats why its crashing its not for kitkat try D33 build from post 994 . i tested with Smics and workes great. smic also made oc kernels of d33 build using them very stable and run cool up to 1.7 gets warm after that.

I'm using one of the kernels that came with smics KK ROM (the 1.6 specifically. I don't want to over heat with the 1.8). I'm going to keep using this because its the best ROM for the mk902 I have seen so far.

I agree, great ROM. Nice and stable. But I do see some glitchyness now and again such as apps crashing, especially the browser. That's why I thought I would try a couple of the d33 kernels with it. No luck. Instead of just a few app crashes I got massive app crashes including the system panel, browser and XBMC and got lots of reboots.

Mechaone, thanks for pointing out the QuickshotV3 rom. I did see that thread. But scooter2014 was saying he was seeing all the same problems I just described with that ROM, so I think I am going to wait for a while to see if they can clean it up.

[wichoxp]

There is no remote server working on it i tried to install ehomemedicenter but rkremote could not find the mk908.

It happens because your current eHomeMediaCenter version doesn't fit in your custom rom. If possible, try to find/recover your original eHomemedia apk (in your original rom) and replace that in system/app in your current custom rom. Then you can pair your RKremote app with your dongle.

Greetingz.

[Max One]

Version 4.2

TV Stick pack (AP6210-alt)

Tried Both kernels, hd and sd no working wifi, bluetooth is working fine.

And another thing. This kernel has only 6 cpu frequencies instead of 7 and the gpu has only 4 instead of 6 frequencies (as in Version 4.1) .

Could u fix the wifi problem and build a kernel with 7 steps for cpu and 6 steps for gpu?
That would be very nice.

Thx in advance.


Max One

[wichoxp]

Version 4.2

TV Stick pack (AP6210-alt)

This kernel has only 6 cpu frequencies instead of 7 and the gpu has only 4 instead of 6 frequencies (as in Version 4.1) .

After spying on CPU freqs (7 steps), I see that system is omitting 512Mhz and 1008Mhz freqs mostly time. Maybe it's possible to omit 1008Mhz and pull 312Mhz to 512Mhz, so in that way freqs can have equal distances (300~400Mhz).

PS. Did somebody know what is the max freq/volts that can be applied for gpu or ram (without toasting them)?

Greetingz.

[roooii]

Does anyone know when they will fix this hdmi scaling bug that appears with these new official roms? I might give this v4.+ kernels a try again if anyone could give me a rom without this bug.

Cheers.

[d33]

Kitkat Kernels for All (well most!)

After spying on CPU freqs (7 steps), I see that system is omitting 512Mhz and 1008Mhz freqs mostly time. Maybe it's possible to omit 1008Mhz and pull 312Mhz to 512Mhz, so in that way freqs can have equal distances (300~400Mhz).

PS. Did somebody know what is the max freq/volts that can be applied for gpu or ram (without toasting them)?

Greetingz.

There is a 1.375v limit in the code that I've left in as I assume there is a good reason.

The repo I'm using is shared with the nitro team and they have coded an optional compile time override. I'm not happy using it in my builds


Sent from my iPhone using Tapatalk

[d33]

Kitkat Kernels for All (well most!)

Version 4.2

TV Stick pack (AP6210-alt)

Tried Both kernels, hd and sd no working wifi, bluetooth is working fine.

And another thing. This kernel has only 6 cpu frequencies instead of 7 and the gpu has only 4 instead of 6 frequencies (as in Version 4.1) .

Could u fix the wifi problem and build a kernel with 7 steps for cpu and 6 steps for gpu?
That would be very nice.

Thx in advance.


Max One

Steps are defaults in Nitro team builds

I'll look at alt code and fix my error soon


Sent from my iPhone using Tapatalk

[scooter2014]

Does anyone know when they will fix this hdmi scaling bug that appears with these new official roms? I might give this v4.+ kernels a try again if anyone could give me a rom without this bug.

Cheers.

Soon as they build a box with no issues lol scaling small priority to some, actual working bluetooth,wifi,hardware seems to be almost there for most thanks to all the devs, tested d33 lastest kernels and they rock solid so far....

and they run so damn cool at oc speeds up to 1.8 wow impressive.

[digger]

Version 4.2
TV Box pack (AP6210/AP6330/RTL8188 (no VMAC yet)

Hi d33,
It would be great if you try to find some time to build RTL8188 VMAC 4.2 kernel
Thanks

[mechaone]

Re: Kitkat Kernels for All (well most!)

Hi d33,
It would be great if you try to find some time to build RTL8188 VMAC 4.2 kernel
Thanks

VMac is pretty specific kernel adaption. I may be well out of my place by saying this, but I can't see that time being spent by him when there are still slight wrinkles in RK3188 code and D33 is now diving into the realm of the RK3288 SOC anyway.
If I'm wrong, it won't be the first time.....

Sent from my SGH-I337M using Tapatalk

[wichoxp]

There is a 1.375v limit in the code that I've left in as I assume there is a good reason.

Thanks for answer... I wonder if is it possible to compile 4.1 kernel version to 1.4v (+0.025v) just for overclock/cpu-stability purposes?

Greetingz.

[d33]

Kitkat Kernels for All (well most!)

Thanks for answer... I wonder if is it possible to compile 4.1 kernel version to 1.4v (+0.025v) just for overclock/cpu-stability purposes?

Greetingz.

Nitro team are still actively working on the kernel sources. Their override switch is set at 1.45 V. I suggest you ask them if they use this in their release kernels


Sent from my iPhone using Tapatalk

[wichoxp]

Nitro team are still actively working on the kernel sources. Their override switch is set at 1.45 V. I suggest you ask them if they use this in their release kernels

Whoa ! ... that's a huge number for devices with no heatsink... thanks for info !

[radhad]

Ugoos um2

Hi !

i love the kernel so far i runs very fast but i got a strange problem i seems the gpu sets resolution so low that i cant see the gui launcher it is so big on my tv. kernel see my tv 720p and everything works. i tested on 2 roms wasser-firmware and neorom HD this rom inc d33 kernel old version. p.s old d33 kernel works fine

do i something wrong ?

sorry for my bad English