Pipo M9 Pro RileyROM 3.0

[Starcopy]

I tried three kernel until now.
#407 - stock (original from Pipo) provided by Randy..too much battery drain for me.

#407 - "kernel_M9Pro3_407_cpu1608_gpu600_ddr720" - in my tablet now and recommended for you too.
I think this one you see with "with nothing marked" - RAM is clocked by default in our tablets at 300 MHz, this one has RAM clocked at 720 MHz, everything feels much snappier. CPU is at stock speed (1608 MHz ~ 1,6GHz) with stock voltage. GPU is at default speed - overclock will not improve anything here, Mali 400 has already been pushed to higher speed in factory.

With "kernel_M9Pro3_407_cpu1608_gpu600_ddr720" i have everything perfectly stable, no black screens, no reboots and gives me longer browsing time and less battery drain compared with #407stock kernel and "kernel_M9Pro3_407_cpu1704-low_gpu600_ddr720".


L.E
If you flash one of the above mentioned kernel, do not forget to restart, go to Recovery and wipe Cache and Dalvik Cache (you'll find it under advanced wipe). This will force system to rebuild cache and optimize application already installed for new kernel.

I'm sorry to say that it's here a complete disaster. Battery drains faster than I can look. It drops 2% in about 5 minutes. The red line is for 3G, only problem is: I don't have a 3G model. Gps say it's on, but that is also off. I have the libril-rk29-dataonly file in it. Did all the things you said. Has enyone a suggestion?

[Edius]

I'm sorry to say that it's here a complete disaster. Battery drains faster than I can look. It drops 2% in about 5 minutes. The red line is for 3G, only problem is: I don't have a 3G model. Gps say it's on, but that is also off. I have the libril-rk29-dataonly file in it. Did all the things you said. Has enyone a suggestion?

It's true, something goes wrong there, but it's not kernel fault.
I'll show you four screenshots with battery usage: two in original state and two edited in Paint (with drain caused by some games and browsing removed).

I have ~10% battery drain in 24 hours (if we exclude approx. 4 hour of intense usage to see if i encounter some black screens, reboot, etc), but in a real standby time battery drain will be much lower.
I have no idea what could cause this huge drain but a real solution will be to reflash RR3.0 pointing to kernel "kernel_M9Pro3_407_cpu1608_gpu600_ddr720" in ROM Flash Tool.

[Starcopy]

I have flashed the original 407 kernel back, but the problems stay's. I did a cache en dalvik cache wipe again. So I suspect that to be a part of the problem. I think that I will make a app backup and flash 3.1 complete with the adjusted 407/1608 kernel, ans see what happens.

[teretzis]

flashed new rom

Hello to all, flashed new ROM today, kernel is the same only difference is the battery doesn't consume as much, still testing to see what new tweaks it has to offer will inform. Thanks

[Edius]

Hello to all, flashed new ROM today, kernel is the same only difference is the battery doesn't consume as much, still testing to see what new tweaks it has to offer will inform. Thanks

Anna has confirmed on FB page is the same firmware.
" Anna Ye If you mean the firmware for M9 pro. it is the same one as the official firmware 20140504 version, just upload it to another link."

[colinabroad]

If anyone has a chance to download and flash this firmware, I'm curious if this is the one with kernel 407 in it...or if it's an even newer kernel.

Hi Randy - its the same one that I am using already as posted a day (or two??) ago- and yes, its the one with 407 kernel in it. I am now on day 2 with 45% battery left after 30 hours of use - but it is still reporting 5% mobile standby vs 93% screen 2% wifi and 2% tablet idle - that's it. I am sticking with this for now as it is giving me by far the best idle power drain. I only wish Pipo would turn the mobile radio off !!

[devin]

Hi all
For me I come back since 3 days to the 2.72 ROM ( gps on/off ok... ) but with the 407 kernel and all is ok.
this night only 1% battery drain for 10h with the wifi off.
No lag
no hangs, no reboot

[colinabroad]

Hi all For me I come back since 3 days to the 2.72 ROM ( gps on/off ok... ) but with the 407 kernel and all is ok. this night only 1% battery drain for 10h with the wifi off. No lag no hangs, no reboot

Do you have the 3G version or WiFI only ? And which 407 Kernel? - I have counted 6 or seven so far!!

[devin]

I have 2 pipo M9pro WIFI and I teste the "kernel_M9Pro3_407_cpu1608_gpu600_ddr720" on the 2 pipo
for the moment it's y best configuration and the 2.72 ROM is for me the more stable.
With all other kernel with overclock the 2 pipo don't boot...

[colinabroad]

I have 2 pipo M9pro WIFI and I teste the "kernel_M9Pro3_407_cpu1608_gpu600_ddr720" on the 2 pipo
for the moment it's y best configuration and the 2.72 ROM is for me the more stable.
With all other kernel with overclock the 2 pipo don't boot...

OK Thanks - so its the same Kernel Edius is using that he also says is stable BUT you do not have the 3G version that drains 1% or more per hour when sitting idle doing nothing!

[Starcopy]

I only wish Pipo would turn the mobile radio off !!

That's something I would like to. It's not only with the M9pro, but the M8pro has the same.

[rrileypm]

I've just posted a new ROM for the M7 Pro from firmware dated 3/26/14.

Here's the link:

http://www.freaktab.com/showthread.php?13943-Pipo-M7-Pro-RileyROM-3-2-KitKat&p=189632#post189632

I would like someone to try this ROM using kernel #407 and see if it is an improvement over what's missing in this ROM.

Depending on how it works, I can port this M7 Pro ROM over to the M9 Pro...by porting, I mean simply changing the boot animation and model ID to M9 Pro.

[Jak]

No time...

I've just posted a new ROM for the M7 Pro from firmware dated 3/26/14.

Here's the link:

http://www.freaktab.com/showthread.php?13943-Pipo-M7-Pro-RileyROM-3-2-KitKat&p=189632#post189632

I would like someone to try this ROM using kernel #407 and see if it is an improvement over what's missing in this ROM.

Depending on how it works, I can port this M7 Pro ROM over to the M9 Pro...by porting, I mean simply changing the boot animation and model ID to M9 Pro.

Currently I'm using RR2.8 for the M7pro, with the oc kernel of Cshock which originated from the Kernels of RR 2.5.2 M9pro. It's fluid, with few occasional lags, plus the glitches cured in RR3.0. I just spent 2 weeks free time flashing trial and error. This was just the perfect timing... I think this will work too. Good luck!

[cshock2010]

M9Pro Modified Kernels
for RileyRom 3.0

Kernel #407
Kernels407_M9Pro_RR3_1608.zip
Kernels407_M9Pro_RR3_1704.zip

Kernel #406
Kernels406_M9Pro_RR3_1608.zip
Kernels406_M9Pro_RR3_1704.zip

Updated kernels in post #147

[Kenneth]

Updated kernels in post #147

what`s new?