Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Stock Firmware - Beelink S82/M8 - MXIII 1/2G - Official FW Releases from Beelink - user feedback thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by scooter2014 View Post
    Hi Oman

    ok i just finished testing all the roms and heres what i have noticed something is up with wifi or streams ive tested now every rom and i have wasser and leolass on two boxes amlogic codex isnt a clean on this box as it is on my old jynk box minix 5 or mk902, steaming causes videos to lag and start stop video not crisp. i thought it was my connection so test all 4 boxes on same any rom the video streaming stops starts crashes and or freezes. i have yet to find the best solution to this issue and have now tested on every rom and similar issues come on every box tested ect any non m8 box.

    i thought it was bad flashes or maybe something on the device still remaining so did a flash of the sd card and re did from scratch same results i get piss poor streaming in any feed some run ok but its limited to maybe a 15 minute to a 30 minute show next show lag and or freeze of the video and amlogic disabled in xbmc. tried stanes omans gotham 2 and 3 /( actually best results with gotham 3 for video clarity.

    i am hearing same from end users these are direct from your supplier and just wondering if something different in these boxes because i hear most no issue with the box? programs tested showbox xbmc, gotham 2 and 3 omans build and stanes build and spmc.

    just wondering is all.
    Because the 109k4 is based on amlogic 8/23 sdk,and with a lot of patches from them...and they said the stage of the sdk must be almost stable for now..

    So all your issues might be fixed on 109k4..if not ,post here again.

    Originally posted by the111 View Post
    I think that someone who works (not working) with AMLOGIC should try and contact them - like OMAN???
    Yes,you are right,and I should buy AML guys a drink for asking help.


    Originally posted by dankec View Post
    New amcodec is not on the list...
    still hoping
    Anyway,the Amcodec is newer than before.

    Originally posted by Magnus33 View Post
    Always thought the screensaver should have a option to use pictures.

    Nothing like having a black screen or android screen at a diner party.
    Okay,on the TBD list.

    Originally posted by Finless View Post
    Damn...... I so wanted it too!

    Londonshore and that BellTV app may get fixed with this!

    Bob
    We will see,But I think not

    Originally posted by vrj12 View Post
    I have a box MXiii 4k of these 2gb version.

    Can anyone tell me how do I update the firmware?
    Find some info on the first post.
    Easy way to catch LOG -> Search 'Syslog' in Google Play,then install it and catch log

    Comment


      Originally posted by jimac View Post
      I'm really sorry to hear that. I hope you do continue to work with the community and provide ROMs for your devices.

      It is very much appreciated and I for one, will consider Beelink my first choice for future devices purely because of the support and assistance you have provided here. I am sure others here will be of the same opinion (as I'm sure vendors will too)

      It's a shame that clone manufacturers are stealing your work, they clearly have little respect.

      Thankyou for the work you and your team have done.
      Thx..
      But you cant distinguish the real and clone by your eyes,unless you open the box


      Originally posted by no_spam_for_me View Post
      AND I have an idea why!
      Because of too many clones!!

      Other reason is we have some OEM customers...It's not easy to handle only if OEM do this by themselves..
      Easy way to catch LOG -> Search 'Syslog' in Google Play,then install it and catch log

      Comment


        Originally posted by oman View Post
        If you are watching around this forum, you'll find I am busy in RK3288 recently..sry about this delay reply.

        109k4 has already been released,but we are still testing..if you see at the first post,I have already written the Change Log.Next Monday I will upload it.

        Honestly,I am a little upset when I see some clone to s82,like the Sunvell board:


        So we spent much time to improve the ROMs,but they just downloaded from here and flash into their clone board?What could I say?

        Sometimes I am thinking why I should be here to support and provide the ROMs?




        109k4 fixed.



        I am not sure about this,but 109k4 improve the codecs.



        I can confirm that our Yamaha RX v371 AVR can passthrough DTS-HD..
        But maybe the compatible ,or you can try the 109k4.



        In 109k4,the xbmc is updated to 13.2,almost the same with stane's.



        No OTA now..


        Sadly there is always going to be clones its part of the business.

        As for why one should stay that's easy.
        Being different from the competition is what sets one company apart from the others.

        Boxee back when betrayed its user base and totally ignored them which destroyed the company in the end.
        You on the other hand are working with the users and rapidly improving the product.
        A win win sitituaion for us and the company not to mention some majorly good word of mouth.

        Ps: thanks for the screensaver thing..
        Mk802IV Neomode 1.9a original rom 720p

        Comment


          Sunvel is a clone NIGHTMARE! Ask me how I know!

          Look back on freaktab and every time they clone a board they did it cheap and lots of problems.
          In fact I quit chasing trying to fix Sunvel clones in the ROMs....

          Bob
          "Pzebacz im, bo nie wiedzą, co czynią"
          "Прости им, они не ведают, что творят"
          "Perdona loro perché non sanno quello che fanno"
          "Vergib ihnen, denn sie wissen nicht, was sie tun"
          "Vergeef hen want ze weten niet wat ze doen"
          "Pardonne-leur car ils ne savent pas ce qu'ils font"
          "Perdónalos porque no saben que lo que hacen"
          "Oprosti im, jer ne znaju Å¡to čine"
          "Forgive them as they know not what they do"





          Comment


            Originally posted by Finless View Post
            Sunvel is a clone NIGHTMARE! Ask me how I know!

            Look back on freaktab and every time they clone a board they did it cheap and lots of problems.
            In fact I quit chasing trying to fix Sunvel clones in the ROMs....

            Bob
            Never known a clone to work with a damn too many cheap parts and cheap construction.
            Mk802IV Neomode 1.9a original rom 720p

            Comment


              Originally posted by vrj12 View Post
              I have a box MXiii 4k of these 2gb version.

              Can anyone tell me how do I update the firmware?


              - I Plug in the TF card and Power line,
              - then pressing the button in the AV hole,
              - then press and release power button,
              - The image appears on the screen!
              - then release button in the AV hole,


              but nothing happens. the box starts normal and does not update!


              What am I doing wrong?


              Thank you

              Comment


                Oman you and your firm have proven to be a leader in this industry we will continue to purchase your boxes first and having a loyal customer base is something that you will have over the other products trust me that speaks volumes in the north americian market.

                It will also show in your sales. This will set you and your firm apart from the others.

                Like everyone else here we value your effort and contiuned support and in return offer the same to you.


                Regards.
                Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

                Comment


                  I find a s82_109k4 link from BAIDU ,share this first:




                  password: 619e
                  Easy way to catch LOG -> Search 'Syslog' in Google Play,then install it and catch log

                  Comment


                    Originally posted by oman View Post
                    I find a s82_109k4 link from BAIDU ,share this first:




                    password: 619e
                    Unfortunately downloading from across the pond it would take about 18 hours and likely never complete

                    Hmm sudden speed up wonder if its on my end there messing about with the internet again. grrrrrrrr
                    Mk802IV Neomode 1.9a original rom 720p

                    Comment


                      Originally posted by oman View Post
                      I find a s82_109k4 link from BAIDU ,share this first:




                      password: 619e
                      Great, downloading. is it safe to test?

                      Comment


                        Should be its really hard to brick these things and if its due Monday its likely done.
                        Mk802IV Neomode 1.9a original rom 720p

                        Comment


                          Hard to brick but not impossible
                          Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

                          Comment


                            Originally posted by scooter2014 View Post
                            Hard to brick but not impossible
                            Yup but you really got to work at it and iam too lazy today
                            Mk802IV Neomode 1.9a original rom 720p

                            Comment


                              Looking good, it has:

                              k200-ota-20140917.zip
                              factory_update_param.aml
                              recovery.img

                              It is SDcard flashable

                              Comment


                                Originally posted by Veronica View Post
                                Looking good, it has:

                                k200-ota-20140917.zip
                                factory_update_param.aml
                                recovery.img

                                It is SDcard flashable
                                You finish download already?
                                This download is painfully slow for me.

                                Comment

                                Working...
                                X