If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 3 September 2014
Hi folks, I need your help to replace the "superuser" root which is in this rom with the "superSU" app. I need to do this because the "superSU" can mask the root to worx home app that I use to authenticate to my enterprise.
I tried to flash from the cwm the update.zip which is used to root the stock tablet without success- I had the error -> This package is for "U65GT" devices; this is a "MTK"...anf the installation was aborted.
Thanks
Hi folks, I need your help to replace the "superuser" root which is in this rom with the "superSU" app. I need to do this because the "superSU" can mask the root to worx home app that I use to authenticate to my enterprise.
I tried to flash from the cwm the update.zip which is used to root the stock tablet without success- I had the error -> This package is for "U65GT" devices; this is a "MTK"...anf the installation was aborted.
Thanks
Thank you mmrrdd but it doesn't work. I don't see SuperSU app in the Drawer and also in the dir /system/app. Please can you support me again? Can I copy the files directly?
Thank you mmrrdd but it doesn't work. I don't see SuperSU app in the Drawer and also in the dir /system/app. Please can you support me again? Can I copy the files directly?
If you tablet have rooted, you can copy the files directly to your tab , you should to start with SuperSu.apk and SuperSuPro.apk first ,
for save your old root permission, your should to copy thes files to another folder under /system ,or /system/media , then set the permission to 644(SuperSu.apk and SuperSuPro.apk) and 755(su(or daemon su) and busybox)
, befor move files to target folder.
the permission for su(or daemon su) and busybox is 755.
the permission for SuperSu.apk and SuperSuPro.apk is 644.
......
I tried to flash from the cwm the update.zip which is used to root the stock tablet without success- I had the error -> This package is for "U65GT" devices; this is a "MTK"...anf the installation was aborted.
Thanks
Just try to flash stock recovery and retry with CWM patch.
That worked for me on similar situation few days ago.
After that you could reflash custom CWM/TWRP recovery.
Just try to flash stock recovery and retry with CWM patch.
That worked for me on similar situation few days ago.
After that you could reflash custom CWM/TWRP recovery.
It worked well also for me. Thanks
Worked also the manual copy but when I unset the root in SuperSU I was unable to set it back . Thanks to mmrrdd too.
I'm not able to find the "thanks" button in the forum.
Dears, looks I have experiencing paranoid. Just glanced to firmwares list and found like new FW for Cube was in the list several links above...Interesting what about changelog...
Dears, looks I have experiencing paranoid. Just glanced to firmwares list and found like new FW for Cube was in the list several links above...Interesting what about changelog...
I am not asked for drivers and can't see a unknown device in "device manager". The tablet is charging but flash tool does not recognize its plugged in. What should I do to install the right drivers?
Edit (for those who have the same problem):
I connected the device with another data cable (made for galaxy s3) and the device connects disconnects all the time. Then I opened the device manager and directly hit unknown device when it popped up (its only for a second or two). In the new window i chose "driver" and installed it from local. I left the device plugged in (disconnecting every 2 seconds) until the installation was completed. Then I unplugged the device and started downloading in falsh tool. After that I reconnected the tablet with the original cable and it started downloading.
Good luck
On this version of the firmware I've had a few issues with location services settings not persisting after a reboot and the GPS taking a long time to lock on. I fixed this today by booting into cwm recovery and clearing coach and data. Had to then reinstall and set up my accounts etc but my GPS and settings now work great.
R: Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 3 September 2014
I'm not able to find how to change the rotation of the lock screen. I have only portrait screen, no rotation of the screen when the tab is in landscape. It's my fault or I have to modify the build.prop? Thanks
I'm not able to find how to change the rotation of the lock screen. I have only portrait screen, no rotation of the screen when the tab is in landscape. It's my fault or I have to modify the build.prop? Thanks
Is the rotation enabled on the relevant menu? (Nel menu a tendina a destra dove c'é l'indicatore della batteria?)
Cube Talk 9x U65GT ROM based on Cube's V 1.8 firmware of 6 August 2014
A short reviev:
Got this U65GT since rd about 2 Weeks.
Took the ROM 1.8 vom 900supersport, root and the lib something.so to get chrome working fine.
Also the brighness patch from Lepi to have more battery lifetime.
You both could have some Beer from me ;-)
The one and only thing I don't like (yeah, I am hating this!) is the inkredible ugly cube Logo on start sequence.
The EU Wallcharger was gone in a few minutes...
I habe bougt a 5V 4A Charger with a round plug.
I have soldered a USB to it and now the U65SG is charged inbetween rund about 3 to 4 hours from 10%☺
I am using a Kingston 64GB SDXC uSD. But exFat doesn't work. I need the uSD Format in fat32 to work!
Navigation is working perfectly.
I' m using iGo Primo.
It's a special Version for Tablets with higher resolutions.
The GPS Fix is nearly in a minute (Outside, off course)...
I am a technician. And I had a lot oft mobile devices to test.
But the U65GT is one oft the fastest and smoothest I have ever tested...
I would buy it again. :-D
Fazit:
Fast, with 900supersport's ROM incredible, with all the mods from freaktab.com unbelievable!
The charging issues can only fixed with a big (I'm using 5V 4A "FSP020-DGAA1") charger.
This one has real 4 Amps! Those little wall chargers mostly has only 2 Amps - even if the seller say it has 4 Amps...
So you can charge from 10% to 100% in rd about 3-4 hours...
I hope, that is enough Information for you all guys.
If you have some questions, Please feel free to ask...
Wish you happy "tabletting" with the incredible U65GT ;-)
Sorry for my lousy english
Last edited by Spassknochen; 09-15-2014, 21:23.
Reason: mistakes coming from german layout, sorry
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment