MK808B clones, how to identify them.

[kupo]

New Clone?

Bought a "MK808B" from amazon.co.uk

Board does not match anything which has been posted in this thread so far.

Wifi/bluetooth are Mediatek.

Tried flashing Finless 1.7 Clone V1 and Finless 1.7 Sunvel. Now all I have is 2 Linux Penguins on boot.

[steveboy2]

RE: New Clone?
yep, thats what I've got too. Didnt save the original ROM [like an idiot], decided to try a new setup since the original did not always boot successfully - went from Google TV to the Android screen back to Google TV, etc.

now Im stuck with a bricked device.
I have tried all of finless' ROMs 1.6-> 2.1 for original, clone 1 and 2 - no luck.
The nearest I get is with the 2.1 original (and 1.7 original) which install but leaves me without BT and Wifi. Others get stuck with two Penguins top left at boot.

Chip set is MT5931SA, MT6622N
Came with Android 4.2

Help! Think I have tried every rom I could find or so it seems ....
:-(

[leolas]

Re: MK808B clones, how to identify them.

Cpntact the seller and ask for the stock rom.

leolas

[steveboy2]

Cpntact the seller and ask for the stock rom.

leolas

no luck so far. They are out of stock - seems they are a reseller of some sort.

[leolas]

Re: MK808B clones, how to identify them.

no luck so far. They are out of stock - seems they are a reseller of some sort.

And you didn't make a backup of the stock rom, sorry but I can't help

leolas

[Guest]

RE: New Clone?
yep, thats what I've got too. Didnt save the original ROM [like an idiot], decided to try a new setup since the original did not always boot successfully - went from Google TV to the Android screen back to Google TV, etc.

now Im stuck with a bricked device.
I have tried all of finless' ROMs 1.6-> 2.1 for original, clone 1 and 2 - no luck.
The nearest I get is with the 2.1 original (and 1.7 original) which install but leaves me without BT and Wifi. Others get stuck with two Penguins top left at boot.

Chip set is MT5931SA, MT6622N
Came with Android 4.2


Help! Think I have tried every rom I could find or so it seems ....
:-(

flash Bobs imito mx1/2 v2.1 rom you will have wireless but no bluetooth

[Fabiop]

New clone

flash Bobs imito mx1/2 v2.1 rom you will have wireless but no bluetooth

I have the same unit with the same problem...
I managed to install the finless 1.7a and 2.0 for the imito mx1 as afgok suggested and the wifi worked. No luck with the BT...

[moonrise]

Hi Guys,
I think there is another way to find out if your mk808b is original or clone.
1.install terminal emulator from playstore and open it
2.type su (you must be rooted)
3. type dmesg
From the output scroll down and look for the wifi entries and see if it is rk903 or something else
There are many entries so keep looking to end of the output.

I cannot confirm if this is the conclusive way because i cannot test it as i do not own a clone mk808b.

Those clone owners can you test it and feedback.

My New MK808B, dmseg output with Android 4.2.2

They are using now AP6210 with RK901 firmware!

<4>[ 23.534787] Current WiFi chip is AP6210.
<4>[ 23.593796] ================================================== =====
<4>[ 23.593841] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 23.593885] ================================================== =====
<4>[ 23.593921] RKWIFI WiFi driver (Powered by Rockchip,Ver 4.49.WFD) init.
<4>[ 23.594202] =========== WLAN placed in POWER ON ========
<3>[ 23.594284] ANDROID-ERROR) wifi_set_power = 1
<6>[ 23.594316] rk29sdk_wifi_power: 1
<6>[ 23.858007] wifi turn on power
<3>[ 23.858037] ANDROID-ERROR) wifi_set_carddetect = 1
<6>[ 23.858077] rk29sdk_wifi_set_carddetect:1
<6>[ 23.858103] mmc1: slot status change detected(0-1)
<6>[ 23.858174] rk29_sdmmc_change_clk_div..1935.. newDiv=42, newCLK=294Khz [sdio]
<6>[ 24.050777]
<6>[ 24.050788] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
<6>[ 24.094517]
<6>[ 24.094521] mmc_attach_sdio..801.. ===== Begin to identify card as SDIO-card. [mmc1]
<7>[ 24.106603] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<7>[ 24.108527] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<7>[ 24.110448] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<7>[ 24.113895] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<6>[ 24.131222] rk29_sdmmc_change_clk_div..1935.. newDiv=0, newCLK=24750Khz [sdio]
<6>[ 24.133408] mmc1: new high speed SDIO card at address 0001
<6>[ 24.134429] mmc_rescan_try_freq..1675.. ===== Initialize SDIO successfully. [mmc1]
<4>[ 24.134545] Linux Kernel SDIO/MMC Driver
<4>[ 24.135141] dhdsdio_probe : no mutex held. set lock
<4>[ 24.135209] FW_PATH = /system/etc/firmware/fw_RK901.bin
<4>[ 24.135218] NVRAM_PATH = /system/etc/firmware/nvram_AP6210.txtFW_PATH = /system/etc/firmware/fw_RK901.bin

[T.Railer]

Bought a "MK808B" from amazon.co.uk

Board does not match anything which has been posted in this thread so far.

Wifi/bluetooth are Mediatek.

Tried flashing Finless 1.7 Clone V1 and Finless 1.7 Sunvel. Now all I have is 2 Linux Penguins on boot.

have a same device. Android 4.2.2 on board. I can save firmware for you, just tell me how

[Fabiop]

New mk808b Clone

Hi,

For those of you that have the new found mk808b clone and have lost the original firmware, the supplier gave me the link to it.

I uploaded it to my device and it went back to normal. Wifi and BT are working

http://pan.baidu.com/share/link?shareid=333469606&uk=2402519506

Maybe we'll have custom ROM for this clone as well!

Cheers

[makelele]

Hi,

For those of you that have the new found mk808b clone and have lost the original firmware, the supplier gave me the link to it.

I uploaded it to my device and it went back to normal. Wifi and BT are working

http://pan.baidu.com/share/link?shareid=333469606&uk=2402519506

Maybe we'll have custom ROM for this clone as well!

Cheers

does yours says ipegtop?

[phinc]

Hi,

For those of you that have the new found mk808b clone and have lost the original firmware, the supplier gave me the link to it.

I uploaded it to my device and it went back to normal. Wifi and BT are working

http://pan.baidu.com/share/link?shareid=333469606&uk=2402519506

Maybe we'll have custom ROM for this clone as well!

Cheers

This site loads forever and it seems to be a pdf file!?
Can you please upload it somewhere else?

[andip71]

Again new clone?

Hi all,

referring to my thread:

http://www.freaktab.com/showthread.php?7100-MK808B-with-R-Box-boot-logo-on-4-2-2

finally I also opened the device and this is what I got.

Somebody ever seen that?

Thanks
Andi

[phinc]

Hi all,

referring to my thread:

http://www.freaktab.com/showthread.php?7100-MK808B-with-R-Box-boot-logo-on-4-2-2

finally I also opened the device and this is what I got.

Somebody ever seen that?

Thanks
Andi
[ATTACH=CONFIG]3322[/ATTACH][ATTACH=CONFIG]3323[/ATTACH][ATTACH=CONFIG]3324[/ATTACH][ATTACH=CONFIG]3325[/ATTACH]

Apparently, he has: http://www.freaktab.com/showthread.php?7096-New-hardware-mk808-mk808b-clone-blue-HTC-board-anyone-seen-this-before&

[JDfense]

cx-803II

I have another clone of the MK808B or should I say, it is a clone of a clone.

My cx-803II is a very similar clone of the MK808B Sunvel clone.

It a rk3066 with 2GB RAM and the following hardware I could identify on the plate

Release ---> cx-803B_V1.1_121230
WLan ---> Mediatek MT5931SA
Bluetooth ---> Mediatek MT6622N
hynix 2X4GB internal memory --->H5TC4G83MFR
audio ---> ES8323 (ECUAG4TW)

Here are the photos.

http://www.mediafire.com/folder/tano46p94onifon,dwd7r3b28c4xz6z/shared

The question is, which TV-Stick is similar enough to create an Android 4.22 ?

JDfense