If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Announcement
Collapse
No announcement yet.
Mod for Tanix TX5 Pro MiniM8SII and Nexbox A95X COOLEME MB1 X9 Frankenstein Firmware WIP
My A5 has no power button as well.It was a trick to do. I had to push reset button than connect the power and usb cable at the same time then release reset button.
For most devices you should not need to use the AC power as the USB cable will deliver enough power to flash on it's own.
Ok need someone to preform quick test... Testing wifi think i found the issue after testing and checking the download speeds on same server.... Use something that you know is constant and give you continual reading.
run the test with out doing and thing. Then run the test holding the box with two fingers directly even with the power in and logo m8s but 1/2 inch in from the extact oposite of the box (front) Thats where the tape is one finger front and back and run the test again mine went from 130 to300 without holding to 1390- 1500m holding it. If same for others think i know fix. I try on mine if works i post it.
Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.
Well I just tried the remote.conf for my A5 and I have a problem. I replaced the file and reboot than I powered down with the original remote and then tried to power back on with it and it would not work. So I tried my old X2 remote that was working before I changed file and it powered on. now i have to use old remote to power on then original remote works after it boots.
Ok need someone to preform quick test... Testing wifi think i found the issue after testing and checking the download speeds on same server.... Use something that you know is constant and give you continual reading.
run the test with out doing and thing. Then run the test holding the box with two fingers directly even with the power in and logo m8s but 1/2 inch in from the extact oposite of the box (front) Thats where the tape is one finger front and back and run the test again mine went from 130 to300 without holding to 1390- 1500m holding it. If same for others think i know fix. I try on mine if works i post it.
Ok need someone to preform quick test... Testing wifi think i found the issue after testing and checking the download speeds on same server.... Use something that you know is constant and give you continual reading.
run the test with out doing and thing. Then run the test holding the box with two fingers directly even with the power in and logo m8s but 1/2 inch in from the extact oposite of the box (front) Thats where the tape is one finger front and back and run the test again mine went from 130 to300 without holding to 1390- 1500m holding it. If same for others think i know fix. I try on mine if works i post it.
You mean hold 2 fingers over the spot where the wifi "antenna/foil tape" is located and then test again without blocking that area?
Well I just tried the remote.conf for my A5 and I have a problem. I replaced the file and reboot than I powered down with the original remote and then tried to power back on with it and it would not work. So I tried my old X2 remote that was working before I changed file and it powered on. now i have to use old remote to power on then original remote works after it boots.
I wonder if a copy is in the boot partition. I will look. Putting kiddo to sleep
Well I just tried the remote.conf for my A5 and I have a problem. I replaced the file and reboot than I powered down with the original remote and then tried to power back on with it and it would not work. So I tried my old X2 remote that was working before I changed file and it powered on. now i have to use old remote to power on then original remote works after it boots.
Can you go into setting and change what power does and see if anything is different
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment