Announcement

Collapse
No announcement yet.

Announcement

Collapse
No announcement yet.

Mod for Tanix TX5 Pro MiniM8SII and Nexbox A95X COOLEME MB1 X9 Frankenstein Firmware WIP

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by matrix777 View Post
    So with all the testing completed do you have the exactt rom to flash to the Mini M8 II granted Bluetooth, audio playback and wifi are stable, and Kodi and Spmc playback above average simplified steps still trying to get a male to male USB :/
    Testing has not yet been completed. Please be patient while prahjister works out the kinks. Even still, this is a BETA frankenstein rom right now, meaning that there may be bugs present. When the latest build is ready you can find it in the very first post of this thread.

    Comment


      ok moving wifi flag to outside brings up downloads to steady 25m 😃
      Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

      Comment


        Originally posted by scooter2014 View Post
        ok moving wifi flag to outside brings up downloads to steady 25m 😃
        So you just put the foil flag on top of the case? On the Mini M8S II I tried what you suggested and put 2 fingers over the antenna and my speed doubled! I can't see any better place to put it inside the case, not much room.

        Comment


          No just cut small hole after top off so line to flag can stay (Outside) the box like a flag blowing in the wind lol...
          Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

          Comment


            Originally posted by scooter2014 View Post
            No just cut small hole after top off so line to flag can stay (Outside) the box like a flag blowing in the wind lol...
            Nice one.

            Can you take a pic to show what your Mod looks like?
            R-TV BOX S10, Beebox N3150, Chuwi Hibox, Nvidia Shield, A95X Max

            Comment


              I been having trouble upload from phone. I have to drop box it. Anyways look like tape have two channel i try to cooper tape it to out side box to see if it can stay in box but cooper come out and make patern because i dont like the flag affect lol
              Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

              Comment


                Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

                Comment


                  Easy to do then.

                  What percentage of speed increase have you seen?
                  R-TV BOX S10, Beebox N3150, Chuwi Hibox, Nvidia Shield, A95X Max

                  Comment


                    If I hold wire below flag 25m
                    You may only view thumbnails in this gallery. This gallery has 2 photos.
                    Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

                    Comment


                      200 percent increase
                      Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

                      Comment


                        Well worth the effort then for that much of an increase.
                        R-TV BOX S10, Beebox N3150, Chuwi Hibox, Nvidia Shield, A95X Max

                        Comment


                          Ya still trying to understand why if i hold antenna wire it jumps so high msybe worth getting external wifi port for the 6 dollars.
                          Many devices now mk902ii/Shield/Mk68 /Ugoos/neox5/minix5 (yes they still work lol) mk80 no it doesnt work lol.

                          Comment


                            The reason the speed jumps when you hold it or even just place your hand over it is because your body essentially becomes a carrier for the WiFi signal. Yes, you become a human antenna! haha

                            I seriously don't understand why these manufacturers don't fully test their products before putting the old stamp of approval on them and shipping them out by the crate load. They must do the WiFi testing right next to the damn router...

                            Comment


                              Originally posted by scooter2014 View Post
                              Ya still trying to understand why if i hold antenna wire it jumps so high msybe worth getting external wifi port for the 6 dollars.
                              You could try the can trick. And make it directional. Or try grounding the outside of the waveguide.
                              Prahjister ****MK808(nonB)****MK808B V5****MK808B Plus****UBOX R89**** CX919****MK808B Pro****Nexbox N9****Eny Em95****Matricon Q2****Tanix TX5 Pro****

                              Comment


                                Still working on the img. Got root worked out. Have up on init.d using universal init.d. working in timing for passthrough. What has to happen is a sound gas to play before setting codec to 2.
                                Prahjister ****MK808(nonB)****MK808B V5****MK808B Plus****UBOX R89**** CX919****MK808B Pro****Nexbox N9****Eny Em95****Matricon Q2****Tanix TX5 Pro****

                                Comment

                                Working...
                                X