X92 TV Box S912, Android 6, 3/16GB, Dual WiFi, Gig Lan

[mencwelp]

Android 6 (20170916) :

https://chinagadgetsreviews.com/download-latest-android-6-0-stock-firmware-x92-tv-box-5.html

Android 7 (20171211) :

https://mega.nz/#!OwlkEDRJ!CnLslKiCiGhzSeP-8fSdcA5RZsoRYZt3mX9Mbnq-oq0

or

https://mega.nz/#!OgtHXSzT!tdHvpEBD_KVGDKKmDcAJOk0I8tmEwFJTG6AuDNcme6k

Will this work for X92 2/16

[stasio]

Will this work for X92 2/16

Only Android 6

[sman789]

I use Update & Backup...select q201-ota-20170916.zip (on SD card)....wipe data and wipe media....update.

Stock firmware Android 7.1.2 (20171211) for X92-3GB link:

https://mega.nz/#!OwlkEDRJ!CnLslKiCi...Zt3mX9Mbnq-oq0

Thanks, I successfully updated my box.

[adonis90]

Please solve this puzzle
I have x92 2g of ram so basically the only one running 6.0
i have a gigabit network on my pc I get about 930 Mbps
i have cat6 cable also going to x92 box so I am not using wifi
so now the problem is i get about 90 or less Mbps on the x92 i read and it states that the x92 lan max is 1000m so guys what's the problem

[LycanWrath]

Anyone interested in trying ROM can try this one :-

https://mega.nz/#!bYEylAwS!p9LQy-C5P...RrRpGqf-lNraPI

This is a modded one based on x92 Rikomagic MK22 ROM. This is for 3G only.

1. The LCD panel works with displaying time, temperature, and flash activities.
2. The modified TROM launcher is reverted back to the Lighthome launcher. The TROM launcher has Russion mod embedded inside while the Lighthome is English. Also modified a few non-working panels in the launcher.
3. Supersu.apk and su are removed. Totally replaced with systemless Magisk.
4. Original automatic framerate adjustment is added with a simple mod, which allowed one to enable or disable autoframe rate.
( Automatic framerate causes display to flicker at the start of movie when frame rate is adjusted, so some people do not like it ).
5. There are reports that the original Rikomagic MK22 ROM cannot detected USB thumb drive/USB HDD and slow throughput.
This isn't always repeatable for me but anyway the whole drivers and kernel have been replaced with a new set of drivers compiled from source.
6. The Rikomagic Mk22 ROM is a 64-bit Android ROM. Most other available x92 ROM are running 32-bit zygote.

Hello,

How can I flash this ROM please? Are you still using this ROM? How is it going?

I am currently on the latest Official nougat ROM for the 3GB/32GB version

EDIT:

I succeeded in flashing the firmware, but it is in setup mode after the first boot for more than 1 hour now.

EDIT2:

Booted finally, had to flash Original mk22 then this modded mk22 without erasing flash and bootloader.
Don't see anything different from the Original mk22 though.

Credits to puchongite from lowyat for his help.
https://forum.lowyat.net/index.php?s...ost&p=88667138

[ypnos]

3/32 version with 6.0android wanted to update to android 7.


I need your help, urgently please.
tried to upgrade via OTA (Select file) got to recovery screen, chose wipe data and then update via SDCARD but.. i get the messages attached.
I also tried via USB stick but no luck.
I have used the x92 3G 171211.zip

Please advise what I am doing wrong and what i should do.

THank you in advance,

[stasio]

3/32 version with 6.0android wanted to update to android 7.


I need your help, urgently please.
tried to upgrade via OTA (Select file) got to recovery screen, chose wipe data and then update via SDCARD but.. i get the messages attached.
I also tried via USB stick but no luck.
I have used the x92 3G 171211.zip

Please advise what I am doing wrong and what i should do.

THank you in advance,

Downgrade from Android 7 to 6, must flash by USB Burning Tool or SD Card maker.

[Guest]

Does anyone else have a problem with the WiFi on the x92? Mine keeps getting disconnected for some reason and it's definitely not a connection problem.

[TheJoker71]

3/32 version with 6.0android wanted to update to android 7.


I need your help, urgently please.
tried to upgrade via OTA (Select file) got to recovery screen, chose wipe data and then update via SDCARD but.. i get the messages attached.
I also tried via USB stick but no luck.
I have used the x92 3G 171211.zip

Please advise what I am doing wrong and what i should do.

THank you in advance,

also as the same as ypnos user picture... when upgrading from stock 6.0.1 to stock 7.1.2

Downgrade from Android 7 to 6, must flash by USB Burning Tool or SD Card maker.

Hi stasio... it seems you don't understand the question of the user... your advice doesn't make sense at all...



i also used the MEGA link you shared... x92 3G 171211.zip... to upgrade my x92_3GB / 32GB...

i tried this upgrade method:

1. copy 3 files from zip... SD CARD + reset + power
2. copy ONLY the q201-ota-root.zip to SD CARD... run Backup&Update... select zip and update...
3. rename q201-ota-root.zip to update.zip... copy to SD CARD... reboot to recovery... update from EXT...

all of them failed 3 i method i used... as the same as ypnos user picture...

A1. how did you manage to update to stock 7.1.2... ???
A2. is the MEGA link x92 3G 171211.zip is the STOCK firmware???

thank you so much...

[stasio]

^
You are like suddenly fall from sky.....read more previous threads.....

[TheJoker71]

^
You are like suddenly fall from sky.....read more previous threads.....

I did back read... But none of the method works for me... Only usb method i havent try yet...

Just hoping there is other method aside from the 3 method i already tried...

[xbones]

I did back read... But none of the method works for me... Only usb method i havent try yet...

Just hoping there is other method aside from the 3 method i already tried...

I'm having same problem. I flashed that stupid russian rom and it's buggy as hell. Can't flash via OTA.zip through SD Card or any other method. It put a version of TWRP that is not compatable with the x92 and therefore wont flash nor load bootloader correctly. I've tried everything and it wont flash. I need to get rid of TWRP or find an OTA that is .img format and not zip to try the burning tool

[TheJoker71]

Looking for IMG file format for USB Burning Tool to downgrade from android 7.1.2 to 6.0.1... X92_3GB_32GB...please share thanks...

[Jancales]

I'm having same problem. I flashed that stupid russian rom and it's buggy as hell. Can't flash via OTA.zip through SD Card or any other method. It put a version of TWRP that is not compatable with the x92 and therefore wont flash nor load bootloader correctly. I've tried everything and it wont flash. I need to get rid of TWRP or find an OTA that is .img format and not zip to try the burning tool

It always help to know what you're doing before start messing with firmwares.

OTA is never in image format, those are flashed over USB.

Stasio posted a link to a stock 7.1 USB firmware at the top of this page, and there are Android 6.0 USB firmwares elsewhere in the thread.

[xbones]

It always help to know what you're doing before start messing with firmwares.

OTA is never in image format, those are flashed over USB.

Stasio posted a link to a stock 7.1 USB firmware at the top of this page, and there are Android 6.0 USB firmwares elsewhere in the thread.

Thank you for the info. Just to state, that I have flashed my firmware on this device and several other TV boxes before. This particular ROM which was mentioned just a few pages back in THIS thread, was android 7 for the 2gb/16gb X92. However it's MK22 based. It boots on the X92 but videos dont play on internet, the screen goes black. This is what we are having flashing from. I download the 6.0 usb firmware update, however now my device wont get detected via USB. So i can only use img file.

Can you recommend a working 6.0 2/16 img file that is compatable with X92 that I can just flash to get a base to use ota from on SD card?

Thanks