[ROM] "GENERIC" SC v2.0 USER/USERDEBUG - S905x2 / S905x3 - AndroidTV 9

[Paveki]

while loading the software I use the settings as in the picture in my post above. The device does not start anymore no reaction no LEDs on the display (the box has completely gone down) ? ?

[soldiaz]

while loading the software I use the settings as in the picture in my post above. The device does not start anymore no reaction no LEDs on the display (the box has completely gone down) ? ?

brick...

[Paveki]

yes brick...

[napalmd]

Does anybody know if this will work in a Vontar X3 4Gb ram 32Gb Rom? any way to test before bricking it?

[RiCkLaR_atvX]

Does anybody know if this will work in a Vontar X3 4Gb ram 32Gb Rom? any way to test before bricking it?

NO it does NOT.

Try Slimbox ROM for the Vontar X3 if you can't find it here on FreakTab go over and look for it on 4pda.

[sevsman]

Deleted as I bought a different box and want to avoid confusion in other threads..

[abhifx]

Does this works on x96 max 2/16 model with rtl? Can't see any exception in the op.

Please someone confirm

[sesdave]

Just tried installing the debug version on an A95x f3 air. Failed on 1% download DDR error using burning tool 2.2. Tied using SD card with burn maker. No joy - starts then drops out. . Hasnt erased anything - boots up with the currently installed stock. Just cant seem to install this firmware - any ideas? probably the DDR3 I suspect

[superceleron]

Just tried installing the debug version on an A95x f3 air. Failed on 1% download DDR error using burning tool 2.2. Tied using SD card with burn maker. No joy - starts then drops out. . Hasnt erased anything - boots up with the currently installed stock. Just cant seem to install this firmware - any ideas? probably the DDR3 I suspect

yes its mem issue, it cant find a compatible config with that box.

[sesdave]

Ah pity - oh well i will try on the x96 max plus when it turn up but as that has DDR3 I suspect that probably wont installl either.


Update - no joy on x96 Max Plus- failed 0x10303004/Romcode/Switchstatus/Identify/Error Result - that was using burning tool 2.2
Lucky for me it still boots stock rom after this attempt . So no custom firmware for me to play with yet. I did read that this error can be circumvented by changing temp settings to 20/80 or 0/90. Might try that later - may as well see how stock run first.,

Update - tried changing temperature setting in burning tool. Same error at 3% downloading uboot. So looks like this box is also not compatible with the firmware.

[azizlaite]

Sucessfully flashed and booted on tanix tx5 MAX. But no WIFI.

Any fix known?

[superceleron]

Sucessfully flashed and booted on tanix tx5 MAX. But no WIFI.

Any fix known?

Not at the moment, they use a specific RTL wifi chip that i can't find the driver code anywhere.

[ford2201]

@superceleron Hello. Do you have access to the original quality version under X96 MAX + with Amlogic S905x3 Cortex-A55 4GB / 64GB firmawre that you can work for ANDRIOID TV because we have a mobile, it shows the quality of the original ANDROID TV, are there any options, how much does it cost with paypal send me email link

[Adam86]

Don't suppose anyone can advise if multichannel 5.1 PCM (LPCM) works on this ROM?

My stock X96 AIR is only giving me 2.0 LPCM.

Please note this is not related to compressed formats such as Dolby Digital or DTS etc as i know bitstreaming those formats generally works fine.

[dnmnhat]

Have rom support Mecool K5 ?