Binary patched kernels for Pipo models

[spawnofdonny]

what do you mean?
my patched kernels already have different voltages for each frequency from 304 to 1704Mhz.

like this on the attachment

[giouncino]

like this on the attachment

they are currently lower than the one on your attachment:

target_v2.1:
mV Mhz
[850, 312],
[875, 504],
[950, 816],
[1000, 1008],
[1075, 1200],
[1175, 1416],
[1275, 1704],

very_low:
mV Mhz
[800, 312],
[825, 504]
[900, 816],
[950, 1008],
[1050, 1200],
[1125, 1416],
[1275, 1704],

Claro:
mV Mhz
[900, 312],
[925, 504],
[1000, 816],
[1075, 1008],
[1150, 1200],
[1250, 1416],
[1325, 1704],

[spawnofdonny]

they are currently lower than the one on your attachment:

target_v2.1:
mV Mhz
[850, 312],
[875, 504],
[950, 816],
[1000, 1008],
[1075, 1200],
[1175, 1416],
[1275, 1704],

very_low:
mV Mhz
[800, 312],
[825, 504]
[900, 816],
[950, 1008],
[1050, 1200],
[1125, 1416],
[1275, 1704],

Claro:
mV Mhz
[900, 312],
[925, 504],
[1000, 816],
[1075, 1008],
[1150, 1200],
[1250, 1416],
[1325, 1704],

sorry i will try and explain myself again the picture i have uploaded is from my phone which i can change the voltage up and down to try different voltages using an app which needs support from the kernel i don't know its possible on pipo m6 pro

[giouncino]

No, you cannot change parameters on the fly.
Only supported kernels can do that

[rrileypm]

Is there anyway to get a vsync patched kernel for the M9 Max? I have a user in Spain who needs one for his tablet. He started this thread, if you can chime in....http://www.freaktab.com/showthread.php?9598-Some-issues

[kandilak]

Is there anyway to get a vsync patched kernel for the M9 Max? I have a user in Spain who needs one for his tablet. He started this thread, if you can chime in....http://www.freaktab.com/showthread.php?9598-Some-issues

i use this http://www.freaktab.com/showthread.p...el-for-PiPo-M9

[levicius]

Here are the usual patched kernels suitable for RileyROM 1.7 KitKat! for Pipo M6pro.

With all of these kernels and kitkat antutu can reach more than 20600 points!

[ATTACH]4643[/ATTACH]
[ATTACH]4644[/ATTACH]
[ATTACH]4645[/ATTACH]

Enjoy!

Giouncino, I tried all you kernels for 1.7 , but the Autuntu is crashing in 3D test , any ideas ? Also tried all the kernels you did for Kimmem .

[dmr]

Giouncino, I tried all you kernels for 1.7 , but the Autuntu is crashing in 3D test , any ideas ? Also tried all the kernels you did for Kimmem .

I got same error when I tried make patched kernels for myself. Don't know right i did or not, but +25 mV on last the cpu frequency helped me fix these errors.


here is my current cpu profile (works great on my current kernel):

"cpu1704h" =>
    [
     [875000, 312000],
     [900000, 504000],
     [975000, 816000],
     [1025000, 1008000],
     [1100000, 1200000],
     [1175000, 1440000],
     [1300000, 1704000],
    ],

[levicius]

I got same error when I tried make patched kernels for myself. Don't know right i did or not, but +25 mV on last the cpu frequency helped me fix these errors.


here is my current cpu profile (works great on my current kernel):

"cpu1704h" =>
    [
     [875000, 312000],
     [900000, 504000],
     [975000, 816000],
     [1025000, 1008000],
     [1100000, 1200000],
     [1175000, 1440000],
     [1300000, 1704000],
    ],

I didnt understand what you mean my friend .

[dmr]

I didnt understand what you mean my friend .

ummm, sad

[levicius]

ummm, sad

kernel_kitkat_cpu1704h_1325mV_gpu600h STOCK_ddr720_Claro.zip

Drm please ,could you edit this kernel for me please ? I am getting autuntu crash when running 3d test as I told you before .
Thank you.

[giouncino]

[ATTACH]4773[/ATTACH]

Drm please ,could you edit this kernel for me please ? I am getting autuntu crash when running 3d test as I told you before .
Thank you.

if it doesn't work with CPU set at 1.325V I suggest you to install the kernel with RAM overclocked only

[levicius]

if it doesn't work with CPU set at 1.325V I suggest you to install the kernel with RAM overclocked only

Am I doing something wrong ?
First I place the image file in RileyROm folder and rename it to kernel.img and replace with the original
Second I click Reboot to Flash Mode
Third I Flash Rom with only Kernel box selected
What about these adress number 0x00...etc , do I have to change them too ?

Strange because all kernels I tried in 1.7 is crashing when 3d testing in antutu

Is there anyway to flash the kernel that I dont know ?

[giouncino]

Everything you did is right.

It seems strange that the app crashes on 3D test...Because I didn't modify the GPU part of the kernel
you can try reinstalling Antutu.
Are you sure that with stock kernel everything works fine with antutu?

[dmr]

Everything you did is right.

It seems strange that the app crashes on 3D test...Because I didn't modify the GPU part of the kernel
you can try reinstalling Antutu.
Are you sure that with stock kernel everything works fine with antutu?

i have a not big experience in overclocking, so i want ask: what are minimum/recommeded step for freq and voltage (now I make all tests with 12 for freq and 25 for voltage)

thanks