K-R42 - wasser firmware - JB Android 4.2.2

[iamsamsamiam]

Hi, Wasser!
Tell me, please, what can be done for normal work my TV Box on your firmware 1.2.4?
Everything works, but very inhibited: the cursor moves jerkily, any action (transition to the next step, open, run) occurs after a while. I used kernel-720p-k-r42-old and kernel-720p-ut1.
Maybe there is an opportunity to fix it, help me, please, if possible.
My device is: cs918, TN-BX09_v2.1, 2013/05/31; 1329

I'm going to assume that the jerky mouse thing has something to do with how the USB priory works. If you plug in your mouse to the OTG port with an OTG adapter the lag disappears. This is how it was with my MINIX X5 as well.

[thistle]

K-R42 firmware by wasser

iamsamsamiam
Thanks for your advice. Unfortunately, I have restored the stock firmware, because yesterday nothing could be done with this trouble.
How not to change a files used in the firmware on the files from the other firmwares - to no avail.
Not tried only kernels of firmwares Lewy, because its firmware older than version 1.2 on my device does not work. But on firmware 1.2, which works great, better than anyone I've tested, there is no LAN-connection, for this reason and kernel this firmware did not try to install.
I will try to use your advice next time.

[bigbow64]

WINDOWS 7 FIRMWARE DEVICE DRIVERS FOR T-R42

Hi ALL
Looking for device drivers for wasser 1.2.4 firmware... After flashing the box i want to connect to my pc to run adb tools.. cannot load any of the samsung device drivers for the GTI9300 which is spoofed in this firmware...
windows wont accept any of the device drivers i have associated with samsung.
firmware runs smooth... the best i have used so far with the T-R42.

I have load the firmware with apps... done a rom backup using CWM RECOVERY and ROM MANAGER having a few issues try to load on another identical box using rom manger to load... it wont see the backup when installing from the SD CARD.

Any suggestions would be appreciated.
Thanks in advance

[no_spam_for_me]

"After flashing the box i want to connect to my pc to run adb tools.."
You need the rockchip-drivers... have a look at my sig at dump...
#2 and #3 (moborobo)

[bigbow64]

"After flashing the box i want to connect to my pc to run adb tools.."
You need the rockchip-drivers... have a look at my sig at dump...
#2 and #3 (moborobo)

Thank you friend for your response... when i boot in normal mode or recovery rockchip drivers dont work ..I can flash the box fine no problems.. i have been searching for days... i thought wasser might be able to shed a little light

[no_spam_for_me]

If "I can flash the box fine no problems.." the "classdriver", witch is needing in recovery-mode, works fine...

For ADB in normal-mode you need another driver. The "Android Composite ADB Interface..." driver, witch you can install for example by moborobo http://www.freaktab.com/showthread.p...l=1#post106326 AND you must configure your android like this
Settings -> [DEVICE] USB -> Enable Connect to PC
Settings -> [PERSONAL] Security -> Enable Unknown Sources
Settings -> [SYSTEM] Developer options -> Enable USB debugging

[bigbow64]

If "I can flash the box fine no problems.." the "classdriver", witch is needing in recovery-mode, works fine...

For ADB in normal-mode you need another driver. The "Android Composite ADB Interface..." driver, witch you can install for example by moborobo http://www.freaktab.com/showthread.p...l=1#post106326 AND you must configure your android like this
Settings -> [DEVICE] USB -> Enable Connect to PC
Settings -> [PERSONAL] Security -> Enable Unknown Sources
Settings -> [SYSTEM] Developer options -> Enable USB debugging

Thanks for your reply my friend .....tried all that ADB still does not work ... ADB INTERFACE driver is loaded but none of my ADB TOOLS can't see the device! surley the GTI9300 driver is out their for it

[no_spam_for_me]

Perhaps I don't really understand your problem... The device is a rk device, but in the android the device it is perhaps called GTI9300 because of compatibility at the google play store, so the most apps (specially handy-apps) are able to install...
I use an older version of wasser mod, but if I connect the device in "normal mode" at my pc, I only see it at the device manager (Win XP) as:
- Android Phone
-- Android Composite ADB Interface
Nothing with GTI9300 or so on...

[bigbow64]

Perhaps I don't really understand your problem... The device is a rk device, but in the android the device it is perhaps called GTI9300 because of compatibility at the google play store, so the most apps (specially handy-apps) are able to install...
I use an older version of wasser mod, but if I connect the device in "normal mode" at my pc, I only see it at the device manager (Win XP) as:
- Android Phone
-- Android Composite ADB Interface
Nothing with GTI9300 or so on...

Correct.... the device in android is a GTI9300... and i have install the ABD INTERFACE driver which changes the device to ANDROID DEVICE in windows 7 ..... all good there... but when trying to communicate cannot find the decvice in any of the adb tools or android kit ...im using



Thanks for your Help

[no_spam_for_me]

I'm not sure, but perhaps you have to start the ADB with administrator privileges (I'm actually not at my PC)?
The neomode version of ADB works for me (another one not)...

[michael2t]

ADB

Hello bigbow64,

I had the Same issue so I loaded Moborobo ... it has its own ADB drivers ...
Start it and connect to the player. Then Leave it running and then start adb in a command window
this works for Me ... List will then show the Media Player ...

NOTE YOU MUST LEAVE Moborobo Running... for this to work

Good Luck

Michael T.

[bahayang]

How do I know my device is "new" or "old" version?

ps. sorry, I can't find any information about this.

[tonyg]

just receive an old cs918

is there any way to get the stock remote to work.

any advice will be thankful

[MikelThief]

K-R42 firmware by wasser

Please provide stock rom. I will try to extract needed files


Wysłane z mojego iPhone 5 przez Tapatalk Professional

[Dr_Bunsen]

Passthrough support in xbmc

Any idea when there will be an update to 1.2.4 that supports passthrough SPDIF optical audio in xbmc?